journal article·2015-03

Realization of DC atmospheric pressure glow discharge without external airflow

Hua Li, De-Cha Zeng, Jun-Yu Liu, Zhen-Cheng Chen

Vacuum· Volume 113
Publisher page

Abstract

Abstract A new needle-to-cylinder electrode structure with small gap (1.5 mm) was designed to realize the stable gas discharge in ambient air. The stable corona discharge and the stable glow discharge were realized without external airflow, which was proved by the discharge waveform stored in the oscilloscope, the discharge pictures recorded by the digital camera and the voltage–current plot. The image of the glow discharge showed that there was a negative glow region, Faraday dark space, a positive column region and an anode spot. Also the experiment and the COMSOL simulation showed that the needle with a diameter of 56.4 μm can realize the glow discharge while the needle with a diameter of 626 μm can not. The reasons for the realization of the glow discharge by the small gap between the needle and the cylinder were analyzed. It also shows that the glow discharge is easily realized with the black spot on the cylinder surface and a proper ballast resistor value (larger than 2 MΩ and less than 30 MΩ). The needle-to-cylinder electrode structure is easy to fabricate by MEMS technology, which can be used in portable analytical instruments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Applications and Diagnostics · Aerosol Filtration and Electrostatic Precipitation · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A direct current glow discharge plasma source for inner surface modification of metallic tube10.1016/j.nimb.2007.07.020 ↗
2. Application of glow discharge plasma for wastewater treatment10.1016/j.electacta.2012.06.131 ↗
3. Design and fabrication of a spherical configuration ion source
4. Stable glow plasma at atmospheric pressure10.1088/0022-3727/21/5/028 ↗
5. The DC glow discharge at atmospheric pressure10.1109/TPS.2002.1003981 ↗
6. Negative corona, glow and spark discharges in ambient air and transitions between them10.1088/0963-0252/14/2/S03 ↗
7. Stable and diffuse atmospheric pressure glow plasma in a multipoint-to-plane configuration in air10.1109/TPS.2004.841207 ↗
8. Experiment and analysis of an atmospheric DC glow discharge device
9. Characteristics of a normal glow discharge excited by DC voltage in atmospheric pressure air10.1088/1009-0630/15/11/13 ↗
10. Characterization of a dc atmospheric pressure normal glow discharge10.1088/0963-0252/14/4/009 ↗
11. Peek · 1929
12. Design, fabrication, and testing of a microfabricated corona ionizer10.1109/JMEMS.2007.909515 ↗
13. Heicklen · 1976
14. Liu · 2010
15. A study of cross-gas-flow to stabilize an atmospheric pressure glow plasma in a multi-pin-to-multi-cupped-plane negative corona discharge10.1016/j.elstat.2005.05.001 ↗
16. Stabilization of DC atmospheric pressure glow discharge by a fast gas flow along the anode surface