The strength-ductility balance of Al0·4CoCu0.6NiTix (x≤1.0) and Al0·4CoCu0·6NiSi0.2Tix (x≤0.5) high entropy alloys by regulating the proportion of Ti and improving the cooling rate
Source abstract
Abstract
Abstract The work prepared Al 0·4 CoCu 0·6 Ni(Si 0.2 )Ti x (Si 0 Ti x (x ≤ 1.0) and Si 0.2 Ti x (x ≤ 0.5)) high entropy alloys (HEAs) with high strength and excellent plasticity by optimizing the added ratio of Ti and rapid cooling, discussed the effects of Ti and cooling rate on HEAs' microstructures and mechanical properties. The results showed that arc melted and copper injected Si 0 Ti x HEAs' phase structures changed gradually from “fcc + L1 2 (Si 0 Ti 0.25 )” to “fcc + L1 2 +minor bcc (Si 0 Ti 0.5 )” and finally to “fcc + L1 2 +bcc + Ni 3 Ti-type phase (Si 0 Ti 0.75 , Si 0 Ti 1.0 )”. But they transformed from “fcc + L1 2 +bcc + Ni 16 Ti 6 Si 7 -type phase (Si 0·2 Ti 0.25 )” to “fcc + L1 2 +bcc + AlNi 2 Ti-type + Ni 16 Ti 6 Si 7 -type phase (Si 0·2 Ti 0.5 )” for Si 0.2 Ti x HEAs. The micro-hardness of arc melted and copper injected HEAs gradually increased compared with Si 0 Ti 0 matrix HEA and that of copper injected HEAs were larger than arc melted HEAs (except Si 0 Ti 0.5 ). The compressive properties of Si 0 Ti 0.25 , Si 0 Ti 0.5 and Si 0·2 Ti 0.25 HEAs were relatively better, in which, the yield strengths of copper injected Si 0 Ti 0.25 , Si 0 Ti 0.5 and Si 0·2 Ti 0.25 HEAs were 2.7, 2.9 and 4.8 times than that of arc melted Si 0 Ti 0 matrix HEA (295 MPa), the fracture strain rates of the corresponding HEAs were 47.1%, 22.4% and 13.5% respectively. It introduced three strengthening mechanisms of solid solution strengthening, trace phase transformation and fine grain strengthening and realized HEAs' strength-ductility balance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Nanostructured high entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructure development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
5. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
6. Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy10.1016/j.jallcom.2008.12.088 ↗
7. Deciphering micro-mechanisms of plastic deformation in a novel single phase fcc-based MnFeCoNiCu high entropy alloy using crystallographic texture10.1016/j.msea.2016.01.065 ↗
8. Characterization of BCC phases in AlCoCrFeNiTix high entropy alloys10.1016/j.matlet.2014.09.100 ↗
9. High-entropy alloys with hexagonal close-packed structure designed by equi-atomic alloy strategy and binary phase diagrams
10. A hexagonal close-packed high-entropy alloy: the effect of entropy10.1016/j.matdes.2016.01.149 ↗
11. A high-entropy V35Ti35Fe15Cr10Zr5 alloy with excellent high-temperature strength10.1016/j.matdes.2017.02.029 ↗
12. High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures10.1016/j.actamat.2016.10.038 ↗
13. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
14. Effects of milling on the microstructure and hardness of Al2NbTi3V2Zr high-entropy alloy10.1016/j.matdes.2016.07.066 ↗
15. Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys10.1016/j.wear.2009.10.013 ↗
16. CoCrFeNi(W1−xMox) high-entropy alloy coatings with excellent mechanical properties and corrosion resistance prepared by mechanical alloying and hot pressing sintering10.1016/j.matdes.2016.12.076 ↗
17. The high-entropy alloys with high hardness and soft magnetic property prepared by mechanical alloying and high-pressure sintering10.1016/j.intermet.2015.11.005 ↗
18. Thermal stability of AlCoCrCuFeNi high entropy alloy thin films studied by in-situ XRD analysis10.1016/j.surfcoat.2009.12.006 ↗
19. Microstructures and electrothermal properties of AlxCrFeNi multi-component alloys10.1016/j.vacuum.2017.07.026 ↗
20. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
21. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
22. Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility10.1016/j.actamat.2017.10.058 ↗
23. Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure10.1016/j.matdes.2017.07.054 ↗
24. Simultaneously increasing the strength and ductility of a refractory high-entropy alloy via grain refining10.1016/j.matlet.2016.08.060 ↗
25. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
26. Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility10.1016/j.msea.2018.01.045 ↗
27. Enhanced mechanical properties of a CoCrFeNi high entropy alloy by supercooling method10.1016/j.matdes.2016.01.112 ↗
28. Optimization of mechanical and tribological properties of FCC CrCoNi multi-principle element alloy with Mo addition10.1016/j.vacuum.2018.01.012 ↗
29. Effects of Mn, Ti and V on the microstructure and properties of AlCrFeCoNiCu high entropy alloy10.1016/j.msea.2008.08.025 ↗
30. Effects of Co and Ti on microstructure and mechanical behavior of Al0.75FeNiCrCo high entropy alloy prepared by mechanical alloying and spark plasma sintering10.1016/j.msea.2015.08.056 ↗
31. Stability of lamellar structures in CoCrFeNiNbx eutectic high entropy alloys at elevated temperatures10.1016/j.matdes.2016.05.044 ↗
32. Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding10.1016/S1006-706X(17)30026-2 ↗
33. Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering10.1016/j.matdes.2013.08.099 ↗
34. Analysis of Si addition on phase formation in AlCoCrCuFeNiSix high entropy alloys10.1016/j.matlet.2016.10.099 ↗
35. Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys10.1016/j.matdes.2016.12.036 ↗
36. Effect of heat treatment on microstructure and mechanical properties of spark plasma sintered AlCoCrFeNiTi0.5 high entropy alloy10.1016/j.matlet.2016.03.077 ↗
37. Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA-SPS technique10.1016/j.matdes.2012.08.048 ↗
38. Experimental and simulated data about microstructure and phase composition of a NiCrCoTiV high-entropy alloy prepared by vacuum hot-pressing sintering10.1016/j.vacuum.2015.11.007 ↗
39. Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V substrate10.1016/j.matdes.2012.04.049 ↗
40. Microstructure evolution and strengthening mechanism of Al0.4CoCu0.6NiSix (x=0-0.2) high entropy alloys prepared by vacuum arc melting and copper injection fast solidification10.1016/j.vacuum.2018.01.031 ↗
41. Liquid phase separation and rapid dendritic growth of high-entropy CoCrCuFeNi alloy10.1016/j.intermet.2016.07.003 ↗
42. Solid solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
43. Phase selection rules for cast high entropy alloys: an overview10.1179/1743284715Y.0000000018 ↗
44. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
45. Beyond atomic sizes and hume-rothery rules: understanding and predicting high-entropy alloys
46. Relationship between the widths of supercooled liquid regions and bond parameters of Mg-based bulk metallic glasses10.1016/S0022-3093(03)00155-8 ↗
47. Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys10.1016/j.intermet.2014.04.001 ↗
48. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗