journal article·2008-09

Numerical simulation of argon twin torch plasma arc for high heating efficiency

Toru Iwao, Keiichiro Iwase, Shinichi Tashiro, Manabu Tanaka, Motoshige Yumoto

Vacuum· Volume 83· Issue 1
Publisher page

Abstract

Plasma arc heating technology has been applied for volume reduction through melting of bottom and fly ash, and for producing slag. Recently, a twin torch plasma arc, which has two torches at the cathode and anode, has been anticipated for application to disposal of medical waste because it can treat a wide area and can treat non-conductive materials. For this study, a numerical simulation model of a twin torch plasma arc at opposite electrodes was developed to elucidate high-efficiency heating using a twin torch plasma arc. It is defined as Local Thermal Equilibrium (LTE) and calculated in Magneto-Hydro-Dynamic (MHD) equations. Furthermore, the temperature distribution and conditions of high heating efficiency with the radiation loss were addressed and compared to those of a single torch. The heating efficiency decreases with increasing radiation efficiency because of the temperature increment caused by the current and input power. The radiation efficiency of a twin torch is about 5% higher than that of single torch.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Vacuum and Plasma Arcs · High-Temperature Coating Behaviors · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Development of excellent fly ash treatment by employing the non-ferrous metals refining technology10.2473/shigentosozai.120.417 ↗
2. Ishikawa · 2001
3. Heating efficiency of twin torch plasma arc10.2355/isijinternational.45.1084 ↗
4. Plasma length on characteristics of DC argon plasma torch arc10.1016/S0042-207X(01)00434-1 ↗
5. Radiation power emitted from Ar torch short plasma as a function of in-put power in several kW10.1016/S0042-207X(00)00258-X ↗
6. Tungsten electrode erosion on DC horizontal short free arc in air10.1016/j.vacuum.2003.12.106 ↗
7. Cathode spot movement of a low-pressure arc for removing oxide layer10.1109/TPS.2007.896917 ↗
8. Oxide-layer thickness effect for surface roughness using low-pressure arc10.1109/TPS.2006.877745 ↗
9. Smooth surface treated by low-pressure arc discharge10.1016/j.vacuum.2006.01.038 ↗
10. Pre-treatment on metal surface for plasma spray with cathode spots of low pressure arc10.1016/j.surfcoat.2005.02.046 ↗
11. Proposal of treatment for hazardous wastes using the highly concentrated radiation from torch plasma10.2355/isijinternational.40.275 ↗
12. Sublimating time for decomposing biphenyl particles by a hollow cathode argon plasma10.1016/S0042-207X(01)00457-2 ↗
13. Treatment of waste by DC arc discharge plasmas10.1109/94.879362 ↗
14. Investigation of plasma treatment for hazardous wastes such as fly ash and asbestos10.1002/(SICI)1520-6416(199902)126:3<73::AID-EEJ8>3.0.CO;2-J ↗
15. Anode attachment of torch plasma arc with high-speed lateral gas air and axial plasma gas argon10.1088/0022-3727/37/8/003 ↗
16. Anode attachment stability and anode heat transfer for high-intensity arcs with lateral gas flow10.1109/TPS.2005.848608 ↗
17. Plasma image processing of high speed arc movement in a rail gun10.1109/TPS.2005.845292 ↗
18. Radiation characteristics as a function of the gas flow rate emitted from argon torch plasma arc discharge10.1002/eej.10006 ↗
19. Patanker · 1980
20. Ikeda · Trans IEEJ · 2000 · 120-A · 41410.1541/ieejfms1990.120.4_414 ↗
21. Boulos · 1994 · vol. 1
22. Net emission coefficient of ultraviolet ray emitted from high temperature argon mixed with iron vapor10.1541/ieejpes.127.1177 ↗