Preparation and tunable optical properties of ion beam sputtered SiAlON thin films
Source abstract
Abstract
Abstract One kind of quaternary thin films of SiAlON were deposited by ion beam sputtering method at ambient temperature, through a sintered SiAlON ceramic target. Ultraviolet, visible and near infrared (UV–VIS–NIR) Spectrophotometer, Fourier transformed infrared spectroscopy (FTIR), glancing incidence X-ray diffraction (GIXRD) and X-ray photoelectron spectroscopy (XPS) were employed to characterize the optical, crystalline and chemical composition properties. The optical properties of the deposited amorphous films could be tailored by changing the relative content of O or N in the films, through introducing different working gas and gas flux adjusting (oxygen, nitrogen or their mixtures). By this way, the refractive index at 850 nm can be tailored from 1.53 to 1.83, and the chemical composition data from XPS analysis supplied strong evidences. Reasonably, the SiAlON films were thought to be one kind of candidate films either as a buffer layer benefit from their high temperature stability, or a mid infrared antireflective layer for silicon and other infrared window materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Transmittance improvement of Dy-α-SiAlON in infrared range by post hot-isostatic-pressing10.1016/j.jeurceramsoc.2011.06.006 ↗
2. Translucent β-SiAlON ceramics10.1007/BF00724710 ↗
3. New developments in α-SiAlON ceramics10.1016/S0955-2219(99)00111-9 ↗
4. High infrared transmission of Y3+–Yb3+-doped α-SiAlON10.1016/j.matlet.2008.08.034 ↗
5. The effect of processing conditions, amount of additives and composition on the microstructures and mechanical properties of α-SiAlON ceramics10.1016/S0955-2219(01)00237-0 ↗
6. α-SiAlON ceramics: a review10.1021/cm00014a009 ↗
7. Warm-white light-emitting diode with yellowish orange SiAlON ceramic phosphor10.1364/OL.29.002001 ↗
8. Photoluminescence properties of β-SiAlON: Yb2+, a novel green-emitting phosphor for white light-emitting diodes10.1088/1468-6996/12/3/034404 ↗
9. Highly efficient white-light emitting diodes fabricated with short-wavelength yellow oxynitride phosphors10.1063/1.2182067 ↗
10. Lad RJ. Multifunctional silicon aluminum oxynitride (SiAlON) ceramic coatings for high temperature applications. Final performance report, Grant #F49620-02-1-0323, P1–23.
11. Unbalanced magnetron sputtered Si–Al coatings: plasma conditions and film properties versus sample bias voltage10.1016/S0257-8972(99)00278-9 ↗
12. PVD coatings in the system SiAlON
13. Investigation of zinc oxide thin film by spectroscopic ellipsometry
14. The decomposition mechanism of SiO2 with the deposition of oxygen-deficient M(Hf or Zr)Ox films10.1016/j.tsf.2004.05.009 ↗
15. The effects of oxidation on the optical properties of amorphous SiC films10.1016/S0921-5107(01)00827-3 ↗
16. Effects of nitrogen atom doping on optical properties and dielectric constant of HfO2 gate oxides10.1063/1.2936309 ↗
17. Determination of optical properties of a-SiOxNy thin films by ellipsometric and UV–visible spectroscopies10.1088/1742-6596/100/8/082033 ↗
18. Dielectric properties of noncrystalline HfSiON10.1103/PhysRevB.73.125123 ↗
19. Optical, electrical and dielectric properties of TiO2–SiO2 films prepared by a cost effective sol–gel process10.1016/j.saa.2011.08.009 ↗
20. Influence of the target and working gas on the composition of silicon nitride thin films prepared by reactive RF-sputtering10.1016/S0168-583X(03)01211-4 ↗
21. Tang · 2006 · 62
22. The affinity of Si–N and Si–C bonding in amorphous silicon carbon nitride (α-SiCN) thin film10.1016/j.diamond.2004.10.045 ↗
23. Properties of polyimide/Al2O3 and Si3N4 deposited thin films10.1016/j.tsf.2011.01.063 ↗
24. Wagner · 1979 · 40