journal article·2009-02

Dual-cathode method for sputtering magnetoelastic iron-boron films

Michael L. Johnson, Odum LeVar, Sang H. Yoon, Jung-Hyun Park, Shichu Huang, Dong-Joo Kim, Zhongyang Cheng, Bryan A. Chin

Vacuum· Volume 83· Issue 6
Publisher page

Abstract

Abstract Magnetoelastic sensors have gained attention in recent years due to their wireless nature and versatility in sensing applications, but there have been issues with fabrication, especially as sensor platform sizes approach the microscale. In this work, a dual-cathode method is presented for the co-deposition of iron and boron to produce magnetoelastic films that serve as the basis for wireless sensors. Deposition rate and film composition experiments were performed to optimize sputtering conditions for obtaining high-quality films with compositions near to the goal of 80/20 at.% iron/boron. The magnetoelasticity of films produced using this method, along with the potential of wireless sensors based upon these films, was confirmed by fabricating small (500 × 100 × 5 μm) sensor platforms and then testing for resonance using a coil and a network analyzer. These sensors were found to have resonance frequencies of around 4 kHz with Q-values, in air, of over 1000. By coating the sensor platforms with gold using a third cathode, and then annealing in a vacuum oven at 220 °C, the environmentally sensitive iron-based alloy that forms the core of the sensor platform may be protected from corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · Metal and Thin Film Mechanics · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Magnetoacoustic remote query temperature and humidity sensors10.1088/0964-1726/9/4/314 ↗
2. Magnetoelastic sensors for remote query environmental monitoring10.1088/0964-1726/8/5/314 ↗
3. Magnetoelastic sensors based on soft amorphous magnetic alloys10.1016/S0924-4247(97)80145-8 ↗
4. A wireless remote query ammonia sensor10.1016/S0925-4005(01)00766-3 ↗
5. A wireless remote query magnetoelastic CO2 sensor10.1039/b004929h ↗
6. A salt-independent pH sensor10.1016/S0925-4005(01)00860-7 ↗
7. Sensitive bistable magnetic sensors using twisted amorphous magnetostrictive ribbons due to Matteucci effect10.1063/1.330369 ↗
8. High magnetostriction metallic glasses used as magnetoelastic labels10.1109/20.490309 ↗
9. Biosensor based on magnetostrictive microcantilevers10.1063/1.2174092 ↗
10. Applications of smart materials in the development of high performance biosensors
11. A wireless remote-query micro-sensor for simultaneous quantification of multiple bioagents10.1109/ICSENS.2004.1426341 ↗
12. Detection of Salmonella typhimurium in fat free milk using a phage immobilized magnetoelastic sensor10.1016/j.snb.2007.04.003 ↗
13. A magnetoelastic resonance biosensor immobilized with polyclonal antibody for the detection of Salmonella typhimurium10.1016/j.bios.2006.06.037 ↗
14. Phage-based magnetoelastic wireless biosensors for detecting bacillus anthracis spores10.1109/JSEN.2006.890135 ↗
15. Moffatt · 1976
16. Thermodynamic optimization of the B-Fe system10.1016/S0925-8388(01)01777-7 ↗
17. Soft magnetic materials10.1109/5.56909 ↗
18. Engdahl · 2000
19. Effect of microstructures on the coercivity of Fe1-xBx (0≤x≤0.2) films prepared by dc magnetron sputtering10.1016/S0042-207X(02)00112-4 ↗
20. Amorphous Fe-B-N films deposited by reactive sputtering of a FeB target10.1016/j.surfcoat.2003.10.032 ↗
21. Mossbauer investigation of sputtered ferromagnetic amorphous FexB100-x films10.1063/1.330749 ↗
22. Magnetoelastic wave excitation properties of amorphous iron-boron films prepared by RF-high rate sputtering10.1143/JJAP.22.79 ↗
23. Magnetostrictive thin films prepared by RF sputtering10.1016/j.jmmm.2004.11.373 ↗
24. du Tremolet de Lacheisserie · 1993
25. Magnetic and structural properties of Fe-B binary metallic glasses I: Variation of magnetic moment with composition10.1088/0305-4608/15/5/016 ↗
26. Correction for longitudinal mode vibration in thin slender beams10.1063/1.2745262 ↗