journal article·2010-11Open access

The influence of operating parameters on pulsed D.C. magnetron sputtering plasma

Sreejith Karthikeyan, Arthur E. Hill, John S. Cowpe, Richard D. Pilkington

Vacuum· Volume 85· Issue 5

Abstract

This paper describes the breakdown voltage characteristics in a pulsed D.C. magnetron sputtering system under varying conditions of frequency, current and pulse-off time. The behaviour of the breakdown voltage with pulsing frequency at different pressures and constant pulse-off time was recorded and revealed that the breakdown voltage decreased consistently as the frequency increased up to 70 kHz. Above this frequency, perturbation in the breakdown voltage was noted, possibly due to the rise in pre-breakdown current during the few microseconds of pulse-on time. This perturbation effect was no longer observed when the operating current was increased. The breakdown voltage was seen to decrease when the pulse-off time was increased while keeping the total period of the pulse constant. © 2010 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Hisek · 2005
2. Advanced coatings through pulsed magnetron sputtering10.1179/026708404225010702 ↗
3. Development of a novel structure zone model relating to the closed-field unbalanced magnetron sputtering system10.1116/1.581432 ↗
4. Pulsed dc magnetron discharge for high-rate sputtering of thin films10.1116/1.1339018 ↗
5. Pulsed magnetron sputter technology10.1016/0257-8972(93)90248-M ↗
6. Reactive pulsed magnetron sputtering process for alumina films10.1116/1.1319679 ↗
7. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
8. Partial vacuum breakdown characteristics of helium at 20 kHz for inhomogeneous field gap10.1109/TDEI.2007.369512 ↗
9. Breakdown characteristics of helium and nitrogen at kHz frequency range in partial vacuum for point-to-point electrode configuration10.1109/TDEI.2008.4543112 ↗
10. Optical emission from pulsed DC magnetron sputtering plasmas10.1109/TPS.2005.845048 ↗
11. Characterization of pulsed dc magnetron sputtering plasmas10.1088/1367-2630/7/1/090 ↗
12. Gas discharge breakdown as a function of frequency10.1007/BF02933276 ↗
13. High-frequency voltage stress of insulation. Methods of testing10.1109/14.78324 ↗
14. Introduction to gas discharges10.1088/0963-0252/9/4/307 ↗
15. Lifetime measurement of the 1s5 metastable state of argon and krypton with a magneto-optical trap10.1103/PhysRevLett.70.3545 ↗
16. Changes of Cu electrode surface conditions and prebreakdown current characteristics caused by repetitive breakdowns in a vacuum10.1002/1520-6416(200010)133:1<11::AID-EEJ2>3.0.CO;2-I ↗
17. Multipacting discharges between coaxial electrodes10.1063/1.1656390 ↗