Developments in PVD tribological coatings (IUVSTA highlights seminar-vacuum metallurgy division)
Source abstract
Abstract
Progress in the development of tribological coatings produced by plasma-assisted PVD methods has recently focused on nanocomposite and multilayered systems, and on hybrid and duplex (combined) processes. One factor driving these developments is the recognition that the coating and substance must be viewed as a system. Thus, the substrate must provide adequate load support for the coating, and the coating should be able to tolerate any surface deformations without cracking or debonding. The latter need can be viewed as a requirement to maximise the hardness (H) whilst ensuring an adequately low elastic modulus (E), to provide an appropriate “elastic strain to failure” which is determined by the H/E ratio [1]. There has been considerable progress in utilising the nanocomposite coating concept to achieve “ultra-hard” coatings [2], [3], [4]. Recent developments have taken this further, by permitting the formation of hard coatings with relatively low moduli and excellent tribological behaviour in a wide range of contact conditions [5], [6], [7], [8], [9], [10], [11].Multilayering provides an alternative route to the production of coatings which can withstand surface deformations without cracking or debonding [12], [13]. Now a number of commercially successful coatings are based on this layering concept, especially using diamond-like carbon (DLC) layers alternatively with metal carbides [14], [15], [16], [17], [18].Plasma-based processes are also being used to pre-harden substrates prior to coating, and thus, reduce the tendency of the surface, plastically deforming under load. These methods include conventional plasma nitriding/carburising [19], [20], [21], and novel electrolytic plasma treatments [22], [23].A recent innovation is the concept of “adaptive” or “chameleon” coatings, which can change their properties to meet the requirements of the contact conditions and the environment [24], [25], [26], [27], [28].Overall, the future for advanced PVD tribological coatings is extremely promising. Vacuum-coating developments now enable design engineers and tribologists to meet virtually any operating need, giving enhanced in-service lifetimes, reduced running costs, often with a reduction in harmful environmental impacts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. On the significance of the H/E ratio in wear control10.1016/S0043-1648(00)00488-9 ↗
2. The search for novel, superhard materials10.1116/1.581977 ↗
3. Hard and superhard nanocomposite coatings10.1016/S0257-8972(99)00586-1 ↗
4. ZrN/Cu nanocomposite film—a novel superhard material10.1016/S0257-8972(99)00482-X ↗
5. Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering10.1016/S0257-8972(99)00240-6 ↗
6. Wear behaviour of carbon-containing tungsten coatings prepared by reactive magnetron sputtering10.1016/S0257-8972(98)00786-5 ↗
7. Structure, hardness and mechanical properties of magnetron-sputtered titanium–aluminium boride films10.1016/S0257-8972(99)00490-9 ↗
8. Structure, mechanical and tribological properties of Ti–Al–B–N thin films produced by electron beam evaporation10.1116/1.581431 ↗
9. Structure, mechanical and tribological properties of sputtered Ti–Al–B–N thin films10.1016/S0257-8972(98)00840-8 ↗
10. Deposition and characterisation of Ti–Al–B–N coatings produced by direct electron-beam evaporation of Ti and Ti–Al–B–N material from a twin crucible source10.1016/S0040-6090(98)01635-6 ↗
11. The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD10.1016/S0257-8972(99)00260-1 ↗
12. Modelling the deformation behaviour of multilayer coatings10.1023/A:1016667932251 ↗
13. Thick Ti/TiN multilayered coatings for abrasive and erosive wear resistance10.1016/0257-8972(94)90069-8 ↗
14. Engineering applications for diamond-like carbon10.1016/0925-9635(94)90297-6 ↗
15. Microstructure and wear behaviour of metal-containing diamond-like coatings10.1016/0257-8972(91)90114-C ↗
16. Preparation of W–C–H coatings by reactive magnetron sputtering10.1016/0257-8972(93)90217-C ↗
17. Multilayer composite ceramic-metal-DLC coatings for sliding wear applications10.1016/0301-679X(95)00121-J ↗
18. Dynamic impact wear of TiCxNy and Ti–DLC composite coatings10.1016/0043-1648(95)06603-9 ↗
19. Hybrid techniques in surface engineering10.1016/0257-8972(94)01004-3 ↗
20. Low temperature plasma diffusion treatment of stainless steels for improved wear resistance10.1016/0257-8972(93)90307-A ↗
21. Plasma-based surface engineering processes for wear and corrosion protection10.1116/1.579862 ↗
22. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
23. Thickness effects on the mechanical properties of micro-arc discharge oxide coatings on aluminium alloys10.1016/S0257-8972(99)00089-4 ↗
24. Zabinski JS, Prasad SV, McDevitt NT. Advanced solid lubricant coatings for aerospace systems. Proceedings of the AGARD Conference on Tribology of Space Systems, 6–7 May 1996, Sesimbra, Portugal. AGARD, CP-589, 31.3.12, 1996.
25. Nanocomposite tribological coatings for aerospace applications10.1016/S0257-8972(99)00228-5 ↗
26. The effects of dopants on the chemistry and tribology of sputter-deposited MoS2 films10.1080/10402009508983486 ↗
27. Chemical and tribological characterisation of PbO–MoS2 films grown by pulsed laser deposition10.1016/0040-6090(92)90764-3 ↗
28. Zabinski JS, Donley MS. Lubricant coatings. US Patent 5,282,985, 1994.