Interfacial adhesion and its degradation in selected metal/oxide and dielectric/oxide interfaces in multi-layer devices
Source abstract
Abstract
Abstract A previously-developed laser spallation technique for measuring the intrinsic tensile strength of single thin film interfaces was modified to test adhesion among multilayers deposited on planar substrates. A laser-generated compressive stress wave on the backside of the substrate pries off the weakest of the interface after reflecting from the surface of the outermost layer in the multilayer assembly, which is deposited on the substrate's front surface. The test procedure was demonstrated on (a) polyimide/SiO 2 /Si 3 N 4 /Si, (b) W/SiO 2 /Si, and (c) Cu/SiO 2 /Si multilayer systems that have importance in device fabrication. The measured strengths were found to be rather sensitive to the coating deposition parameters and surface backsputter treatment prior to film deposition. Additionally, the polyimide/nitride interface showed a dramatic decrement in its strength when exposed to varying relative humidity levels for different durations. Beside showing the basic nature of the measurements, these latter results now afford implementation of a novel device reliability strategy which, in addition to being more rational, reliable, and robust, will result in significant time and cost savings compared with the exhaustive set of accelerated time/temperature/humidity tests that are presently employed by the industry. This new device reliability strategy is also discussed in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Feng Y, Raju VR, Suhir E. Moisture induced failures of plastic packages of IC devicesstate of the art and crucial needs. Structural analysis in microelectronics and fiber optics, EEP-vol. 211. New York: ASME, 1997. pp. 89–139.10.1115/IMECE1997-0817 ↗
2. Recent developments in the laser spallation technique to measure the interface strength and its relationship to interface toughness with applications to metal/ceramic, ceramic–ceramic and ceramic–polymer interfaces10.1163/156856194X00447 ↗
3. Measurement of thin film interface toughness by laser-generated stress pulses10.1016/S0022-5096(97)00081-1 ↗
4. The Mechanical performance of fiber-reinforced ceramic matrix composites10.1016/0921-5093(89)90391-2 ↗
5. Mittal KL. (editor). 1978, In: Adhesion measurement of thin films, and bulk coatings, Vol. 640. Philadelphia: American Society for Testing Materials, 1978. pp. 5–17.10.1520/STP38620S ↗
6. Interfaces with controlled toughness as mechanical fuses to isolate fiber damage10.1007/BF02385418 ↗
7. The effect of microstructure and chemistry on the tensile strength of Nb/Sapphire interfaces, with and without the interlayers of Cr and Sb10.1016/0956-7151(94)00258-J ↗
8. Structure and chemistry of Nb/Sapphire interfaces, with and without the interlayers of Sb and Cr10.1016/0956-7151(94)00257-I ↗
9. Response to the comments of Nutt and King on the bond strength measurements10.1016/S0921-5093(97)00418-8 ↗
10. Gupta V, Hernandez R. Tensile strength of nitride/polyimide interface and its degradation due to moisture segregation with implications for device reliability. Mater Sci Engng, 2000, submitted for publication.