journal article·2001-03Open access

Reactive filtered arc evaporation

N.M Mustapha, R.P Howson

Vacuum· Volume 60· Issue 3

Abstract

Abstract A cathodic filtered arc evaporation system was used in the deposition of elemental and reactively produced compound films. It was created within a conventional bell jar vacuum system using a magnetic-field steered arc and a plasma duct formed from a free-standing and isolated high-current solenoid. The curved solenoid was provided to divert and direct the plasma created around the surface of the target onto the substrate and growing film surface. The magnetic field produced by the solenoid directs the electrons in the plasma, the ions are moved by their electrostatic attraction to the electrons. The manipulation of the product of arc evaporation has been shown to be possible with a simple low field solenoid. Larger particles were removed and high-quality aluminium and titanium droplet-free-films were obtained at the end of the filter solenoid, showing high reflectance and good adhesion with no signs of droplet contamination. To optimise the reactive cathodic arc deposition process, films deposited over a range of reactive gas pressures and evaporation rates, were analysed using XRD, SEM, optical transmission and reflectance, refractive index and sheet resistance for conducting films such as TiN. TiN films examined by SEM, showed a fine crystalline structure with small grain size of 20–30 nm. For Al 2 O 3 the filtered arc-deposited films show good adhesion, good optical properties and were nearly stoichiometric with a refractive index of 1.66.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Martin · Surf Coat Technol · 1991 · 49 · 23910.1016/0257-8972(91)90062-2 ↗
2. Aksenov II, and Khoroshikh VM. Charge composition and ion energy in the plasma of a magnetically focused vacuum arc source. Proceedings of the XVIIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Eindhoven, August 17–21, 1998. p. 570.10.1109/DEIV.1998.738723 ↗
3. Witke T, and Siemroth P. Deposition of droplet-free films by vacuum arc evaporation. Results and applications.Proceedings of the XVIIIth International Symposium on Discharges and Electrical Insulation in Vacuum. Eindhoven, August 17–21, 1998. p. 605.
4. Comparison of unbalanced magnetron sputtering and filtered arc evaporation for the preparation of films onto insulating substrates10.1016/S0042-207X(97)00011-0 ↗
5. Aksenov · Sov Phys Tech Phys · 1984 · 29 · 893
6. Randhawa · J of Vacuum Sci Technol · 1989 · A7 · A
7. Mustapha N. Reactive filtered arc evaporation. Ph.D. thesis, Loughborough University, Loughborough, UK, 1993.
8. Handbook of Micro-measurement with a talystep. Manual published by Rank–Taylor–Hobson, 1987.
9. Howson RP, Mustapha N, Ja’fer HA, Stenlake ME. A comparison between the performance of an arc evaporation source with ion selection and an unbalanced magnetron sputtering source. Proceedings of the IPAT, CEP consultants Ltd. , Brussels, 1991. p. 328–334.
10. Deshpandey · Thin Solid Films · 1982 · 96 · 26510.1016/0040-6090(82)90251-6 ↗
11. Schemmel · Thin Solid Films · 1989 · 181 · 59710.1016/0040-6090(89)90528-2 ↗