Surface preparation and effective contact formation for GaAs surface
Source abstract
Abstract
Abstract (NH 4 ) 2 S solution was applied to surface-cleaned (etched) GaAs using various kinds of solution and method to investigate the passivation mechanism. After cleaning with HCl and H 3 PO 4 , elemental As remained on GaAs surface and successive sulfidation treatments resulted in the formation of AsS bond. However, there was no AsS bond observed after the sulfidation of NH 4 OH-cleaned GaAs because elemental As was dissolved in NH 4 OH solution. The thermally cleaned GaAs surface at 600°C containing a large amount of elemental Ga on surface showed the formation of GaS bond after sulfidation treatment. Therefore, it could be confirmed that the elemental forms of As and Ga bind with S and produce GaS and AsS bonds, which induce the passivation effect on GaAs. A new technique using sulfidation and subsequent hydrogenation treatment was studied to minimize defective interfacial bonds of metal(Pd, Au)/GaAs Schottky contact. Sulfur-passivation was effective to make metal/GaAs interface completely free of GaAs oxides, and hydrogenation treatment after the deposition of metal ultrathin film was introduced to control the defective As compounds originated from the metallization. After the treatment, the reverse leakage current of the Schottky diode was dramatically reduced about 10 times, compared with the simply S-passivated sample. Furthermore, from capacitance–voltage ( C – V ) dopant profile, these sulfidation and subsequent hydrogenation processes were found to cause no damage to the GaAs substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Davis · Surf Sci · 1964 · 2 · 3310.1016/0039-6028(64)90040-8 ↗
2. Carpenter · Appl Phys Lett · 1988 · 53 · 6610.1063/1.100572 ↗
3. Wang · J Appl Phys · 1992 · 71 · 274610.1063/1.351048 ↗
4. Sandroff · Appl Phys Lett · 1987 · 51 · 3310.1063/1.98877 ↗
5. Kwak · IEEE Electron Device Lett EDL · 1998 · 19 · 48110.1109/55.735753 ↗
6. Weast RC, Astle MJ. CRC handbook of chemistry and physics. CRC Press: Boca Raton, FL, 1979–1980. p. B-80, B-79, B-57.
7. Song · J Vac Sci Technol B · 1995 · 13 · 7710.1116/1.587989 ↗
8. Lu · J Vac Sci Technol A · 1989 · 7 · 64610.1116/1.575859 ↗
9. Sangwal K. Etching of crystals. North-Holland: Amsterdam, 1987. p. 252.
10. Ghandhi SK.VLSI Fabrication Principles—Silicon, Gallium Arsenide. Wiley: New York, 1994. p. 644.
11. Carpenter · Appl Phys Lett · 1988 · 53 · 6610.1063/1.100572 ↗
12. Spindt · Appl Phys Lett · 1989 · 55 · 86110.1063/1.101780 ↗
13. Hirayama · Appl Phys Lett · 1989 · 54 · 256510.1063/1.101051 ↗
14. Sandroff · Appl Phys Lett · 1989 · 54 · 36210.1063/1.101451 ↗
15. Kang · Thin Solid Films · 1998 · 332 · 43710.1016/S0040-6090(98)01204-8 ↗
16. Kang · Thin Solid Films · 1999 · 351 · 43510.1016/S0040-6090(99)00548-9 ↗
17. Ohno · Phys Rev B · 1990 · 42 · 1119410.1103/PhysRevB.42.11194 ↗
18. Freeouf · Appl Phys Lett · 1981 · 39 · 72710.1063/1.92863 ↗
19. Sugata · J Vac Sci Technol B · 1988 · 6 · 108710.1116/1.584302 ↗
20. Ren · Semicond Sci Technol · 1997 · 12 · 115410.1088/0268-1242/12/9/015 ↗
21. Sugata · J Vac Sci Technol B · 1988 · 6 · 108710.1116/1.584302 ↗
22. Ren · Appl Phys Lett · 1990 · 56 · 86010.1063/1.102683 ↗
23. Fujisaki · J Appl Phys · 1997 · 82 · 34110.1063/1.365818 ↗
24. Lee · Appl Phys Lett · 1994 · 65 · 271710.1063/1.112545 ↗