journal article·2026-08Open access

Cu-coated Bi2O3 on plasma-activated carbon cloth as a high-performance supercapacitor electrode

Kuanysh Nurbolat, Wanting Liu, Zhengwei Wu

Vacuum· Volume 251

Abstract

Flexible battery-type supercapacitors are often limited by sluggish interfacial charge transfer and poor adhesion of active materials on carbon cloth, leading to rapid performance decay under high-rate cycling. Here, we combine O2/N2 plasma activation, hydrothermal growth of Bi2O3, and Cu magnetron sputtering to construct a hierarchical Cu–Bi2O3/plasma-activated carbon electrode on carbon cloth without a conventional carbon overlayer. The mixed O2/N2 RF plasma introduces nanopores and O/N-containing functional groups onto carbon fibers, improving wettability and creating anchored surface sites for homogeneous Bi2O3 nanosphere growth. An ultrathin sputtered Cu overlayer is deposited onto the Bi2O3/plasma-activated carbon electrode, acting as a conductive shell that bridges Bi2O3 nanospheres and the carbon substrate, reinforcing contact, reducing interfacial resistance, and improving active-material utilization. SEM, TEM, XRD, and XPS confirm this plasma-engineered architecture and a conformal Cu coating. Electrochemical tests in 6 M KOH reveal accelerated redox kinetics, reduced charge-transfer resistance, and good rate performance. The electrode delivers an areal capacitance of 4086.3 mF cm−2 at 1 mA cm−2 and retains 84.2% after 5000 cycles. Overall, these findings suggest a practical, potentially general strategy for designing high-performance carbon/transition-metal-oxide composite electrodes for supercapacitors.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Conway · 1999
2. Materials for electrochemical capacitors10.1038/nmat2297 ↗
3. A review of electrode materials for electrochemical supercapacitors10.1039/C1CS15060J ↗
4. Review on supercapacitors: technologies and performance evaluation10.1016/j.jechem.2020.11.013 ↗
5. Battery–supercapacitor hybrid devices: recent progress and future prospects10.1002/advs.201600539 ↗
6. Prussian-blue-analogue-derived Ag@Co3O4 and Bi2O3@BiFeO3 nanostructures as battery-type electrodes for high-performance asymmetric supercapacitor10.1021/acsanm.4c06142 ↗
7. A comprehensive review on supercapacitor applications and developments10.3390/en15030674 ↗
8. Hybrid supercapacitor battery-type electrode potential of electrospun PAN–porphyrin CNFs
9. Carbon fiber cloth surface treatment technology and its application in electrochemical energy storage
10. Improving wettability and adhesion of carbon cloth with polyaniline coating for flexible supercapacitor electrodes
11. Plasma treatment for sustainable functionalization of textile materials
12. Enhanced electrocatalytic activity of carbon cloth by synergetic effect of plasma and acid treatment
13. Modification of layered graphitic carbon nitride by nitrogen plasma for improved electrocatalytic hydrogen evolution10.3390/nano9040568 ↗
14. Plasma treatment as a promising environmentally benign approach for synthesis of valuable multi-gas doped Nano-TiO2-P25: an efficient way to boost the photocatalytic performance under visible light illumination10.1111/php.13374 ↗
15. In situ preparation of nitrogen-doped carbon nanotubes on carbon cloth surface as binder-free flexible electrode materials for supercapacitors
16. Fe3N nanoparticle-encapsulated N-doped carbon nanotubes on biomass-derived carbon cloth as self-standing electrocatalyst for oxygen reduction reaction10.3390/nano13172439 ↗
17. Synthesis of oxygen-deficient bismuth oxide photocatalyst for enhanced visible light activity
18. An efficient and facile one-step synthesis strategy: bismuth oxide with controllable size and shape for high-performance supercapacitors10.1016/j.matlet.2019.02.098 ↗
19. Preparation of electrode materials based on carbon cloth via hydrothermal method and their application in supercapacitors10.3390/ma14237148 ↗
20. Optimization of Bi2O3 growth on carbon cloth surface via plasma activation for enhancing the capacitive performance of composite materials10.1088/2053-1591/ae0416 ↗
21. Plasma-activated nitrogen-doped carbon cloth/bismuth oxide composite electrodes for enhanced supercapacitor performance10.1007/s10854-025-15929-y ↗
22. Carbon quantum dot-anchored bismuth oxide composites as potential electrode for lithium-ion battery and supercapacitor applications10.1021/acsomega.8b03490 ↗
23. Cu-ion hybrid porous carbon with nanoarchitectonics derived from heavy-metal-contaminated biomass as ultrahigh-performance supercapacitor
24. High performance near ultraviolet ray detector by cluster-wrapped surface structure in ferroelectrics10.1016/j.cej.2024.151630 ↗
25. RF sputter-deposited nanostructured CuO films for micro-supercapacitors
26. Flexible carbon cloth electrode: pioneering the future of electrochemical sensing devices10.1007/s42114-025-01338-6 ↗
27. Cu-ion hybrid porous carbon with nanoarchitectonics derived from heavy-metal-contaminated biomass as ultrahigh-performance supercapacitor10.3390/ijms26020569 ↗
28. Phyto-inspired Cu/Bi oxide-based nanocomposites: synthesis, characterization and energy relevant investigation10.1039/D1RA05066D ↗
29. Vertically porous Ni(OH)2/Ni thin film on carbon cloth for high performance flexible supercapacitors10.1016/j.matlet.2016.12.094 ↗
30. Hierarchical Co3O4/CuO nanorod array supported on carbon cloth for highly sensitive non-enzymatic glucose biosensing10.1016/j.snb.2019.126860 ↗
31. A step-by-step guide to perform x-ray photoelectron spectroscopy
32. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
33. Reliable determination of chemical state in X-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
34. Binding energy referencing in X-ray photoelectron spectroscopy10.1038/s41578-024-00743-5 ↗
35. Synthesis of Bi2O3/hierarchical porous carbon composites for supercapacitor application10.1016/j.est.2023.110118 ↗
36. Controlled micro/mesoporous carbon aerogel structure as a template for Bi2O3 nanoparticles/rods to improve the performance of asymmetric supercapacitors10.1016/j.est.2021.102994 ↗
37. Bi2O3 with activated carbon composite as a supercapacitor electrode10.1016/j.jallcom.2014.06.149 ↗
38. Phosphine plasma activation of α-Fe2O3 for high energy asymmetric supercapacitors10.1016/j.nanoen.2018.04.032 ↗
39. Surface characterization of plasma-modified carbon fiber: correlation between surface chemistry and morphology of the single strand
40. Immoderate nanoarchitectures of bimetallic MOF-derived Ni–Fe–O/NPC on porous carbon nanofibers as freestanding electrode for asymmetric supercapacitors10.1016/j.carbon.2022.08.091 ↗
41. Heteroatoms-doped hierarchical porous carbon derived from chitin for flexible all-solid-state symmetric supercapacitors
42. Hierarchical nitrogen-doped porous carbon/carbon nanotube composites for high-performance supercapacitor10.1016/j.spmi.2019.04.013 ↗
43. Cyclic voltammetry study of bismuth oxide Bi2O3 powder by means of a cavity microelectrode coupled with Raman microspectrometry10.1016/S0013-4686(00)00677-0 ↗
44. Bi2O3 deposited on highly ordered mesoporous carbon for supercapacitors10.1016/j.elecom.2008.11.041 ↗
45. Boosting the energy density of supercapacitors by designing both hollow NiO nanoparticles/nitrogen-doped carbon cathode and nitrogen-doped carbon anode from the same precursor10.1016/j.cej.2021.134083 ↗
46. Self-consistent modelling of X-ray photoelectron spectra from air-exposed polycrystalline TiN thin films10.1016/j.apsusc.2016.06.012 ↗
47. Corncob cellulose-derived hierarchical porous carbon for high performance supercapacitors
48. Nitrogen-doped porous carbon composite with three-dimensional conducting network for high-rate supercapacitors10.1016/j.jallcom.2020.156217 ↗
49. A novel strategy to prepare N, S-codoped porous carbons derived from barley with high surface area for supercapacitors10.1016/j.apsusc.2020.146265 ↗
50. Biomass-derived porous carbons from soybean residues for high-performance solid-state supercapacitors10.3390/molecules25184050 ↗
51. Pomelo peel-based N, O-codoped hierarchical porous carbon material for supercapacitor application10.1016/j.cplett.2020.137597 ↗
52. The visible relaxor ferroelectric ceramics PrxBa0.9-xSr0.1TiO3 via chemical pressure-mediated phase separation10.1021/acs.jpcc.4c08472 ↗
53. Synthesis of 3D-interconnected hierarchical porous carbon from heavy fraction of bio-oil using crayfish shell as the biological template for high-performance supercapacitors10.1016/j.carbon.2020.11.083 ↗
54. Electrochemical preparation of CuBi2O4 nanoparticles on nanoporous stainless steel as a binder-free supercapacitor electrode10.1016/j.jallcom.2015.08.226 ↗
55. In situ growth of Cu2O/CuO nanosheets on Cu coating carbon cloths as a binder-free electrode for asymmetric supercapacitors10.3389/fchem.2019.00420 ↗