journal article·2026-04Open access

Microstructure analysis and electro-controlled tribological properties of extruded SiC/6092Al composites

Lihu Wang, Siyi Yang, Shouren Wang, Baoping Wang, Qin Sun

Vacuum· Volume 247

Abstract

This study investigates the SiC/Al interfacial bonding and matrix grain orientation, and elucidates the mechanism of electric field-induced friction enhancement through temperature and electrorheological effects. Extruded SiC/6092Al composites were fabricated by powder metallurgy and hot extrusion. Grain features, microstructure, physical properties, and electro-controlled friction and wear behavior were characterized. Recovered grains in the Al matrix promote the <111>∥TD texture. SiC particles are uniformly dispersed throughout the matrix without agglomeration. At the SiC/Al interface, SiC atoms conform to the XYX and X-0.5X-X distribution patterns. Precipitation of β and Q phases is observed in the Al matrix. Application of an external voltage significantly enhances the friction coefficient of the specimens. Specifically, the increments in friction coefficient for specimens J1, J2, and J3 are 0.075, 0.143, and 0.109, respectively. The friction-increasing effect of the electric field exhibits characteristics of immediacy, abruptness, and reversibility. The synergistic mechanism of temperature and electrorheological effects in electrically controlled friction enhancement is systematically explained. Furthermore, the wear mechanism of composites is analyzed. SiC reinforcement enhances wear resistance. In the absence of an electric field, the dominant wear modes are plowing and fatigue spalling; under an applied electric field, plowing and adhesive wear become the primary mechanisms.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electromagnetic Effects on Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Triboelectrochemistry: influence of applied electrical potentials on friction and wear of lubricated contacts10.1007/s11249-020-01328-3 ↗
2. Friction and wear behaviors of molybdenum disulfide nanosheets under normal electric field10.1016/j.apsusc.2018.05.221 ↗
3. Controlling turbulent drag across electrolytes using electric fields10.1039/C6FD00247A ↗
4. Effects of current-carrying conditions on lubrication and tribological performance of ionic liquid
5. Electrotunable friction with ionic liquid lubricants: how important is the molecular structure of the ions?10.1021/acs.jpclett.5b01802 ↗
6. Electric field effect on friction coefficient of diamond-like carbon film heated by laser irradiation10.1007/s11249-021-01482-2 ↗
7. Effect of liquid crystal molecular orientation controlled by an electric field on friction10.1016/j.triboint.2017.06.021 ↗
8. Correlation between adsorption/desorption of surfactant and change in friction of stainless steel in aqueous solutions under different electrode potentials10.1007/s11249-010-9604-6 ↗
9. Effect of silicon content on nucleation and growth of multiscale precipitates in al–mg–si–cu–zn alloys for different aging paths10.1016/j.msea.2022.143016 ↗
10. Effects of Cu content and Cu/Mg ratio on the microstructure and mechanical properties of Al–Si–Cu–Mg alloys10.1016/j.jallcom.2015.07.090 ↗
11. Microstructure and mechanical properties of Al–18Si–10Cu–10Ni–5Mn(-5Mg) heat-resistant aluminum alloys prepared by laser-directed energy deposition10.1016/j.msea.2023.145512 ↗
12. The microstructures and mechanical properties of a 5vol%SiC/AA2024 nanocomposite fabricated by powder metallurgy10.1016/j.matchar.2021.111090 ↗
13. SiC particle reinforced Al matrix composites brazed on aluminum body for lightweight wear resistant brakes10.1016/j.ceramint.2021.12.313 ↗
14. Carbon emission potential of new energy vehicles under different electricity structures10.1007/s11356-023-31113-3 ↗
15. Subsidy strategy on new-energy vehicle based on incomplete information: a case in China10.1016/j.physa.2019.123370 ↗
16. Machining eco-friendly jute fiber-reinforced epoxy composites using specially produced cryo-treated and untreated cutting tools10.3390/polym16233329 ↗
17. Effect of particles on tensile and bending properties of jute epoxy composites10.1515/mt-2021-2038 ↗
18. Improvement of thermal properties of Al/Cu/SiC composites by tailoring the reinforcement microstructure and comparison to thermoelastic models10.1016/j.jallcom.2020.156794 ↗
19. Enhanced strengthening of Al–SiC nanocomposites containing a uniform dispersion of dense nanoparticles fabricated by a hybrid accumulative roll-bonding process10.1016/j.msea.2020.140217 ↗
20. Microstructural characteristics and mechanical behavior of SiC(CNT)/Al multiphase interfacial micro-zones via molecular dynamics simulations10.1016/j.compositesb.2021.108996 ↗
21. Microstructure and mechanical properties of SiCp/Al composite fabricated by concurrent wire-powder feeding laser deposition10.1016/j.jmrt.2022.11.112 ↗
22. Interfacial microstructure and sintering mechanism of plasma activated sintered Al/SiC composites10.1016/j.vacuum.2023.112051 ↗
23. High strength SiCp/Al–2Cu-1.2Mg-0.6Si composite with weak natural aging hardening10.1016/j.coco.2021.100742 ↗
24. A study of interparticulate strain in a hot-extruded SiCp/2014 Al composite10.1007/s12613-019-1760-6 ↗
25. Effect of carbon nanotubes (CNTs) and silicon carbide (SiC) on mechanical properties of pure Al manufactured by powder metallurgy10.1016/j.jmrt.2019.12.027 ↗
26. Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient
27. Effect of Cu content on the microstructures and wear performance of al-si-cu-ni-mg alloy based SiC reinforcement composites
28. Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites
29. Wei · 2000
30. Influences of electric field strength on rheological properties of electrorheological fluid based on hollow poly (O-phenylenediamine co O-toluidine) dispersed on silicone oil10.1016/j.molliq.2020.113762 ↗
31. The giant electrorheological effect in suspensions of nanoparticles10.1038/nmat993 ↗
32. Electrorheological fluid with an extraordinarily high yield stress10.1063/1.1446999 ↗
33. Electrotunable friction with ionic liquid lubricants10.1038/s41563-022-01273-7 ↗
34. Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts10.1016/j.jiec.2022.11.028 ↗
35. Friction and wear of magnetorheological fluid under magnetic field10.1016/j.wear.2012.01.006 ↗
36. Microstructure and textile reinforcement mechanism of extruded 6H-SiC 6092Al composites10.1016/j.vacuum.2025.114025 ↗
37. Effect of silver nanopowder addition on mechanical properties of silver-copper alloy used in the jewellery industry10.1177/09544089251316320 ↗
38. Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route10.1016/j.jmrt.2022.02.094 ↗
39. Effect of SiC nanoparticles on the microstructure and texture of friction stir welded AA2024/AA606110.1016/j.matchar.2019.04.020 ↗
40. Effect of nano-SiC particles on grain orientation and hardness of friction stir processed aluminum matrix composite10.1016/j.matlet.2024.136219 ↗
41. In-situ scanning transmission electron microscopy study of Al-amorphous SiO2 layer-SiC interface10.1007/s10853-023-08186-z ↗
42. Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al–20Si alloy10.1016/j.jallcom.2013.10.128 ↗
43. Clarifying the role of quenching conditions on microstructure, intergranular corrosion behavior and mechanical properties of al-mg-si-cu alloy with high Cu10.1016/j.corsci.2024.112336 ↗
44. Quantitative measurement of displacement and strain fields from HREM micrographs10.1016/S0304-3991(98)00035-7 ↗
45. Atomic scale investigation of the crystal structure and interfaces of the B′ precipitate in al-mg-si alloys10.1016/j.actamat.2019.11.059 ↗
46. Higher proportional limit of SiC/Al composites with nano-scaled stacking faults10.1016/j.coco.2022.101188 ↗
47. Precipitation behavior during re-aging of al-mg-si-cu alloy10.1016/j.matdes.2022.110883 ↗
48. Exploring tribological and corrosion properties of Al-5052SiC+CeO2 hybrid surface composites fabricated using friction stir processing10.1016/j.triboint.2024.110176 ↗
49. Vortex-free stir casting of Al-1.5 wt% Si-SiC composite10.1016/j.jallcom.2019.02.099 ↗
50. Wen · 2018
51. Effect of carbon in fabrication Al-SiC nanocomposites for tribological application10.3390/ma10060679 ↗
52. Rollett · 2018
53. Interfacial charge density and its connection to adhesion and frictional forces10.1103/PhysRevLett.121.026804 ↗
54. Dynamical modelling of the chain structure formation in electrorheological fuids
55. Mechanism of stress transmission from an electrorheological fluid to the electric plates10.1063/1.110840 ↗