journal article·2025-08Open access

Electrochemical characterization of Cr/CrN/B4C/B-C-N films deposited by magnetron sputtering under mixed Ar-Ne atmospheres

Sebastián Gascón-Pérez, O. Jiménez, Sion F. Olive-Méndez, José T. Holguín-Momaca, Ladislav Čelko, Edgar B. Montufar, J. Chávez, Max Fernando Flores-Jiménez

Vacuum· Volume 238

Abstract

B-C-N coatings have the potential to combine the properties of B 4 C, BN, CN x , and carbon structures, resulting in coatings with high hardness, low friction coefficient , high wear resistance, and high corrosion resistance , making them highly attractive for many applications as protective coatings. In this investigation, the impact of the Ar:Ne flow rate ratio used in the deposition process on the properties of Cr/CrN/B 4 C/B-C-N films was analyzed. The films were deposited by magnetron sputtering onto AISI M2 steel and silicon wafer substrates. The study focused on analyzing the influence of Ne addition to the working atmosphere on the bonding structure, chemical composition, and electrochemical behavior of the films. Scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) techniques, Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) were employed to determine the morphology, roughness, crystalline structure, BN phase fractions, atomic composition, and bonding states of the films. XRD analysis revealed that the B 4 C/B-C-N layers had an amorphous structure, while FTIR and XPS identified the presence of sp 2 B-N, C=C, C-N, C=N, and B-O bonds within the films. Additionally, XPS studies demonstrated that higher Ne flow rate fractions (Ne70) increased nitrogen and boron content and reduced oxygen and carbon fractions, indicating enhanced nitrogen incorporation. Electrochemical tests were conducted on all samples and the uncoated metallic substrate in a 3.5 wt % NaCl solution as the electrolyte. These tests included open-circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PD) measurements. The results showed that the Cr/CrN/B 4 C/B-C-N films deposited on AISI M2 steel exhibited superior corrosion resistance compared to the uncoated AISI M2 substrate. Notably, films deposited at higher Ne flow rate fractions exhibited 5.0-fold improved corrosion protection , attributed to lower porosity and denser microstructure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Effect of annealing on the mechanical and scratch properties of BCN films obtained by magnetron sputtering deposition10.1016/j.apsusc.2014.06.081 ↗
2. Effects of nitrogen gas ratio on composition and microstructure of BCN films prepared by RF magnetron sputtering10.1016/j.vacuum.2009.06.012 ↗
3. Influence of composition on the wear properties of boron carbonitride (BCN) coatings deposited by high power impulse magnetron sputtering10.1016/j.surfcoat.2015.07.077 ↗
4. The structure and optical properties of C doped BN thin films deposited by RF reactive magnetron sputtering10.1016/j.optmat.2020.110502 ↗
5. Optical and XPS studies of BCN thin films by co-sputtering of B 4 C and BN targets10.1016/j.apsusc.2016.10.180 ↗
6. A review of boron carbon nitride thin films and progress in nanomaterials, Mater
7. Variation of carbon concentration, ion energy, and ion current density of magnetron-sputtered boron carbonitride films10.1016/S0257-8972(99)00353-9 ↗
8. Influence of Ar-N2 gas composition on the magnetron-sputter deposition of cubic boron nitride films10.1016/j.surfcoat.2010.05.032 ↗
9. Review of advances in cubic boron nitride film synthesis, Mater10.1016/S0927-796X(97)00009-0 ↗
10. Synthesis and characterization of boron carbon oxynitride films with tunable composition using methane, boric acid and ammonia10.1039/C7NJ01886J ↗
11. Direct growth of hexagonal boron nitride nanofilms on stainless steel for corrosion protection10.1021/acsanm.1c02590 ↗
12. Orientation of B-C-N hybrid films deposited on Ni (111) and polycrystalline Ti substrates explored by X-ray absorption spectroscopy10.1016/j.tsf.2010.09.052 ↗
13. Synthesis and characterization of boron carbon nitride films by radio frequency magnetron sputtering10.1016/S0257-8972(00)00600-9 ↗
14. Bonding characteristics of DC magnetron sputtered B-C-N thin films investigated by Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy10.1016/j.tsf.2004.03.009 ↗
15. Microstructure and wear properties of AISI M2 tool steel on RF plasma nitriding at different N2-H2 gas compositions10.1016/j.surfcoat.2014.08.036 ↗
16. Influence of anions on the corrosion of high speed steel10.1023/A:1018409904091 ↗
17. Physical vapor deposition technology for coated cutting tools: a review10.1016/j.ceramint.2020.04.168 ↗
18. Tribological properties of ternary BCN films with controlled composition and bonding structure10.1016/j.diamond.2003.09.011 ↗
19. Effect of nitrogen pressure on structure and optical properties of pulsed laser deposited BCN thin films10.1016/j.surfcoat.2009.11.033 ↗
20. Improvement of the electrochemical behavior of steel surfaces using a TiN[BCN/BN]n/c-BN multilayer system10.1016/j.diamond.2010.11.013 ↗
21. Corrosion behaviour of decorative and wear resistant coatings on steel deposited by reactive magnetron sputtering - tests and improvements10.1016/j.tsf.2005.12.020 ↗
22. Electrochemical corrosion of nano-structured magnetron-sputtered coatings10.3390/coatings9100682 ↗
23. Electrochemical properties of boron–carbon–nitride films formed by magnetron sputtering10.1016/j.electacta.2005.08.006 ↗
24. The tribological performance of BCN films under ionic liquids lubrication10.1016/j.diamond.2008.07.023 ↗
25. Synthesis of a-C coatings by HPPMS using Ar, Ne and He as process gases10.1016/j.surfcoat.2016.07.099 ↗
26. A comparative study of direct current magnetron sputtering and high power impulse magnetron sputtering processes for CNx thin film growth with different inert gases10.1016/j.diamond.2016.01.009 ↗
27. A strategy for increased carbon ionization in magnetron sputtering discharges10.1016/j.diamond.2011.12.043 ↗
28. Sputter deposition of boron nitride using neon–nitrogen discharges10.1116/1.580512 ↗
29. Formation of thick cubic boron nitride films in noble gases10.2109/jcersj2.118.164 ↗
30. On the origin of better hemocompatibility of the BCxNyOz coatings10.1016/j.apsusc.2021.151760 ↗
31. Binding energy referencing in X-ray photoelectron spectroscopy: expanded data set confirms that adventitious carbon aligns to the sample vacuum level10.1016/j.apsusc.2024.160666 ↗
32. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
33. Practical methods for background subtraction in photoemission spectra10.1002/sia.5453 ↗
34. impedance.py: a Python package for electrochemical impedance analysis10.21105/joss.02349 ↗
35. Sputter-deposited low-stress boron carbide films10.1063/5.0022191 ↗
36. Inhibiting tribocorrosion damage of Cr/CrxN coatings by multi-layer design10.1016/j.ceramint.2020.08.196 ↗
37. Microstructure and mechanical/thermal properties of Cr-N coatings deposited by reactive unbalanced magnetron sputtering10.1016/S0257-8972(01)01090-8 ↗
38. Target poisoning during CrN deposition by mixed high power impulse magnetron sputtering and unbalanced magnetron sputtering technique
39. Corrosion behaviour of CrN/Cr multilayers on stainless steel deposited by unbalanced magnetron sputtering10.1016/j.vacuum.2012.01.016 ↗
40. Effect of microstructure and thickness on the friction and wear behavior of CrN coatings10.1016/j.wear.2013.02.005 ↗
41. Moulder · 1992
42. Strain-induced work function in h-BN and BCN monolayers
43. A step-by-step guide to perform x-ray photoelectron spectroscopy
44. The effect of thickness on surface structure of rf sputtered TiO2 thin films by XPS, SEM/EDS, AFM and SAM10.1016/j.vacuum.2020.109766 ↗
45. Electrochemical properties of TiWN/TiWC multilayer coatings deposited by RF-magnetron sputtering on AISI 106010.3390/coatings11070797 ↗
46. Corrosion resistance of modified hexagonal boron nitride (h-BN) nanosheets doped acrylic acid coating on hot-dip galvanized steel10.3390/ma13102340 ↗
47. Nanoscale architecture of ZrN/CrN coatings: microstructure, composition, mechanical properties and electrochemical behavior10.1016/j.jmrt.2021.08.018 ↗
48. Electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive direct current magnetron sputtering10.1016/j.tsf.2006.03.008 ↗
49. A study on the quantitative determination of through-coating porosity in PVD-grown coatings10.1016/j.apsusc.2004.03.213 ↗
50. The corrosion behavior of Cr-(C,N) PVD hard coatings deposited on various substrates10.1016/S0013-4686(03)00953-8 ↗