journal article·2025-04Open access

Development of SLA 3D printed volumes for leak testing of LHC Hi-Lumi cryomodules at STFC

J.O.W. Poynton, S. Wilde, J. Bourne, E. Jordan, N. Templeton, B. Matheson, T. Capelli, A. Seller

Vacuum· Volume 234

Abstract

Daresbury Laboratory recently completed the build of a Radio Frequency Dipole (RFD) crab cavity cryomodule for the Super Proton Synchrotron (SPS). During the build the team faced challenges leak testing welds which could not be tested in the typical evacuation method. Each cryomodule build requires 34 unique cryogenic and insulation vacuum weld configurations, most of which are repeated across multiple weld sites. Each weld must be qualified inspected and tested (visual and leak) before the build can progress. A suite of bespoke 3D printed weld test tools and procedures have been developed with major savings to time and cost and improved quality of leak testing tooling, developing a methodology which can be adapted to many different weld configurations. All whilst maintaining a baseline leak rate of <5e-12 mbar L/s at or below 1e-3 mbar. The result was a repeatable and cost-effective means of performing high-accuracy leak tests in a short timescale. • STFC has built its first cryomodule for the CERN LHC – High luminosity project. • SLA 3D printed plastic volumes are a cost-effective material for leak detection. • Using Accura25, volumes have been printed that reach 1E-03 – 1E-04 mbar. • Accura25 vol have been used to leak test with <5E-12 mbar l/s accuracy. • SLA parts perform equally to stainless steel during helium leak testing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Superconducting Materials and Applications · Fusion materials and technologies · Particle Detector Development and Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. 2017
2. Leak-TIght welding experience from the Industrial assembly of the LHC Cryostats at CERN10.1063/1.2908564 ↗
3. CERN, “CERN Technology Portfolio - Hood Clamshell Tool,” [Online]. Available: https://kt.cern/sites/default/files/technology/hood-clamshell-tool/tech-brief/hood-clamshell-toolpdf.pdf. [Accessed 09 2024].
4. In-Vacuum Performance of a 3D-printed ion deflector10.1016/j.vacuum.2019.109061 ↗
5. Additively Manufactured ultra-high-vacuum chember below 10-10 mbar
6. Complex optical elements for scanning helium microscopy through 3D printing10.1088/1361-6463/ac3a3e ↗
7. Additive manufacturing for ultra-high vacuum components; LEveraging photo-polymer resin technologies10.1016/j.vacuum.2023.112769 ↗
8. 3D printing of vacuum and pressure tight polymer vessels for thermally driven chillers and heat pumps
9. Dassault Systemes, “SLA 3D Printing Material Compared,” Dassault Systemes, [Online]. Available: https://www.3ds.com/make/solutions/blog/sla-3d-printing-materials-compared. [Accessed 25 September 2024].
10. Vacuum Compatability of 3D-printed materials
11. Vacuum Compatibility of 3-D-Printed Parts10.1109/TPS.2016.2540924 ↗