Synthesis and characterization of ammonia strengthened and ambient dried N-doped hydrophilic graphene aerogel with good electrical conductivity
Source abstract
Abstract
We present a novel ‘one-pot’ approach for strengthening reduced graphene oxide (rGO) hydrogels by nitrogen doping. Ammonia is directly added to the precursor reaction mixture prior to hydrothermal gel formation, as opposed to treating as-synthesised rGO hydrogel by ammonia in a second hydrothermal process. This process ensures that the resulting hydrogels are sufficiently robust that aerogels may then be produced by natural drying under ambient temperture and pressure. The as-formed rGO aerogel possesses a Young’s modulus as high as 28 kPa and exhibits superelasticity, withstanding strains of up to 95%. Moreover, the strengthed graphene aerogel possesses an electrical conductivity of 1.5 S cm -1 and a specific surface area of 280.0 m 2 g -1 . Although the rGO aerogel was sufficiently reduced to provide good electrical conductivity, it retains a water contact angle of 47 ± 1º, indicating hydrophilic behaviour.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Aerogels and thermal insulation · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Highly hydrophobic and ultralight graphene aerogel as high efficiency oil absorbent material10.1016/j.jece.2017.04.005 ↗
2. Hydrophilic graphene aerogel anodes enhance the performance of microbial electrochemical systems10.1016/j.biortech.2020.122907 ↗
3. Ammonia solution strengthened three-dimensional macro-porous graphene aerogel10.1039/c3nr00971h ↗
4. Ammonia strengthened graphene/CNT-wrapped polyaniline-nanofiber composites loaded with palladium nanoparticles for coin cell supercapacitors10.1016/j.electacta.2017.12.193 ↗
5. Superior cycle stability of nitrogen-doped graphene nanosheets as anodes for lithium ion batteries10.1016/j.elecom.2011.05.012 ↗
6. Construction of 3D porous graphene aerogel wrapped silicon composite as anode materials for high-efficient lithium-ion storage10.1016/j.surfcoat.2022.128147 ↗
7. Electrochemical elucidation of phosphorus-doped and 3D graphene aerogel surface-modified SiOx porous nanocomposite electrode material for high-performance lithium-ion batteries10.1016/j.electacta.2024.143775 ↗
8. Vertically aligned graphene sheets membrane for highly efficient solar thermal generation of clean water10.1021/acsnano.7b01965 ↗
9. Freeze casting: from low-dimensional building blocks to aligned porous structures-a review of novel materials, methods, and applications10.1002/adma.201907176 ↗
10. Fabrication of super-elastic graphene aerogels by ambient pressure drying and application to adsorption of oils10.1016/j.cjche.2021.09.031 ↗
11. Naturally dried superelastic bioinspired graphene aerogel for pressure/stretch sensing and separation10.1016/j.compscitech.2022.109549 ↗
12. Synthesis and characterisation of reduced graphene oxide/bismuth composite for electrodes in electrochemical energy storage devices10.1002/cssc.201601553 ↗
13. Naturally dried graphene aerogels with superelasticity and tuneable Poisson's ratio10.1002/adma.201603079 ↗
14. Processable aqueous dispersions of graphene nanosheets10.1038/nnano.2007.451 ↗
15. Deoxygenation of exfoliated graphite oxide under alkaline conditions: a green route to graphene preparation10.1002/adma.200801306 ↗
16. Ambient pressure dried graphene aerogels with superelasticity and multifunctionality10.1039/C5TA06452J ↗
17. Bioinspired synthesis of monolithic and layered aerogels10.1002/adma.201706294 ↗
18. Ultralight and highly compressible graphene aerogels10.1002/adma.201204530 ↗
19. Graphene aerogel prepared through double hydrothermal reduction as high-performance oil adsorbent10.1016/j.mseb.2017.09.014 ↗
20. A comparative study of graphene oxide: Hummers, intermediate and improved method10.1016/j.flatc.2019.02.001 ↗
21. Petrova
22. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
23. Photoemission spectroscopy of clean and potassium-intercalated carbon onions10.1103/PhysRevB.67.113401 ↗
24. A photoelectron spectroscopy study of ion-irradiation induced defects in single-wall carbon nanotubes10.1016/j.carbon.2007.09.036 ↗
25. Photoemission study of onionlike carbons produced by annealing nanodiamonds10.1103/PhysRevB.71.075420 ↗
26. Fullerene core star-like polymers-1. Preparation from fullerenes and monoazidopolyethers10.1016/S0014-3057(97)00225-5 ↗
27. Effective removal of 2, 4, 6-trinitrophenol over hexagonal metal–organic framework NH-MIL-88B (Fe)10.1002/aoc.4580 ↗
28. Characterization of diamond films deposited on titanium and its alloys10.1016/0040-6090(95)06913-5 ↗
29. A highly conductive porous graphene electrode prepared via in situ reduction of graphene oxide using Cu nanoparticles for the fabrication of high performance supercapacitors10.1039/C5RA07857A ↗
30. Multiscale graphene topographies programmed by sequential mechanical deformation10.1002/adma.201506194 ↗
31. Continuous crystalline graphene papers with gigapascal strength by intercalation modulated plasticization10.1038/s41467-020-16494-0 ↗
32. Large-scale current collectors for regulating heat transfer and enhancing battery safety10.1038/s44286-024-00103-8 ↗
33. Estimation of Young's modulus of graphene by Raman spectroscopy10.1021/nl301073q ↗
34. Morphology control of nickel nanoparticles prepared in situ within silica aerogels produced by novel ambient pressure drying
35. Large-area superelastic graphene aerogels based on a room-temperature reduction self-assembly strategy for sensing and particulate matter (PM 2.5 and PM 10) capture10.1039/C9NR02071C ↗
36. Electrochemical properties of supercapacitors operating in aqueous electrolyte with surfactants10.1016/j.electacta.2010.02.037 ↗