High nitrogen and argon diffusion in cyclic olefin copolymer foil versus temperature
Source abstract
Abstract
Measurements of nitrogen and argon diffusion coefficient in cyclic olefin copolymer (COC) have been performed at different temperatures ranging between 21 & DEG;C and 101 & DEG;C. Optical transparent COC foils have been prepared with 10 & mu;m thickness and total surface of about 25 cm2. The foils have exhibited high purity in composition. The morphology of the COC surface has been investigated by Scanning Electron and Atomic Force Microscopies. The room temperature measured diffusion coefficients, of about 6.56 x 10-3 cm2/s and 6.30 x 10-3 cm2/s for N2 and Ar, respectively, have been obtained with a home-made experimental set-up by measuring the gas pressure gradient reduction applied to the two faces of COC thin foils versus the time. The foils show a significant increase of the N2 and Ar diffusion coefficients with the temperature. The native amorphous nature, the obtained nano-porous structure, the damage suffered by the thin foils of COC under high applied pressure are responsible of the evaluated high diffusion coefficients for nitrogen and argon gases. The experimental apparatus to measure the diffusion coefficients vs. temperature, the obtained results, the COC sheets microstructure, the measurements comparison with the literature data and possible COC applications in biomedicine are presented and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Injection Molding Process and Properties · Membrane Separation and Gas Transport · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 2004
2. Proton emission from a laser ion source10.1063/1.3671740 ↗
3. Employment of carbon nanomaterials for welding polyethylene joints with a Nd:YAG laser10.1080/1023666X.2014.921108 ↗
4. Ion lithography of single ions irradiation for spatially regular arrays of pores in membranes of polyethylene terephthalate10.3390/nano12223927 ↗
5. Khalil · 2004
6. Characterization of activated cyclic olefin copolymer: effects of ethylene/norbornene content on the physiochemical properties10.1039/C6AN01448H ↗
7. Lamonte · 2001
8. A review of cyclic olefin copolymer applications in microfluidics and microdevices10.1002/mame.202200053 ↗
9. Baker · 2000
10. Correlation of separation factor versus permeability for polymeric membranes10.1016/0376-7388(91)80060-J ↗
11. Wang · 2008 · vol. 13
12. J. Gas separation properties in cyclic olefin copolymer membrane studied by positron annihilation, sorption, and gas permeation10.1016/j.memsci.2005.05.034 ↗
13. Nitrogen diffusion in graphene oxide and reduced graphene oxide foils10.1016/j.vacuum.2021.110632 ↗
14. Diffusion of nitrogen gas through polyethylene based films10.1002/pcr2.10207 ↗
15. Porous polydimethylsiloxane filled with graphene-based material for biomedicine10.1007/s10934-021-01095-z ↗
16. Polydimethylsiloxane containing gold nanoparticles for optical applications10.1088/1748-0221/15/03/C03044 ↗
17. Cyclic olefin polymer membrane as an emerging material for CO2 capture in gas-liquid membrane contactor10.1016/j.jece.2022.107669 ↗
18. Activation energies of diffusion of organic migrants in cyclo olefin polymer10.1016/j.ijpharm.2014.07.029 ↗
19. Thermo-mechanical and physical characterization of polyolefin based films for photovoltaic Cells10.1063/1.5046007 ↗
20. 2023
21. W. S. Rasband, ImageJ, U. S. National Institutes of Health, Bethesda, Maryland, USA, https://imagej.nih.gov/ij/, 1997-2018.