In-situ synchrotron HEXRD study on the stress relaxation behavior and internal stress evolution mechanism of a PM nickel-base superalloy
Source abstract
Abstract
FGH96 is a powder metallurgy nickel-base superalloy used for turbine disk of aero-engines. In this study, theevolution of micro-lattice stress and strain of FGH96 alloy during stress relaxation and thermal deformation wasinvestigated by employing in-situ high-energy synchrotron radiation techniques. Results indicate that therelaxation of macroscopic compressive stress is closely related to the increased lattice strain in grains of differentorientations. During high-temperature relaxation, the lattice stress of the (111)γ/γ′ and (220)γ/γ′ planes decreasesrapidly in the initial relaxation phase and then stabilizes, while the lattice stress of the (200)γ/γ′ planeremain uniformly relaxed throughout, suggesting minimal load transfer between different grains. During thehigh-temperature compression and holding process, dynamic recrystallization partially releases the internalstress generated by work hardening. During the holding stage, different stress relaxation mechanisms wereobserved for grains of varying orientations, with (311) oriented grains primarily achieving this through dislocationrearrangement and sub-grain nucleation, while (220) oriented grains tend to migrate grain boundariesbased on existing recrystallization nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Reed · 2008
2. Donachie · 2002
3. Thermal evolution behavior of carbides and γ′ precipitates in FGH96 superalloy powder10.1016/j.matchar.2012.02.014 ↗
4. 5th national technical conference: kiamesha lake, NY, 9–11 october 197310.1016/0010-4361(74)90585-0 ↗
5. Effects of C and Hf concentration on phase relations and microstructure of a wrought powder-metallurgy superalloy10.1007/BF02661638 ↗
6. Residual stress distribution in Ni-based superalloy turbine discs during fabrication evaluated by neutron/X-ray diffraction measurement and thermomechanical simulation10.1016/j.matdes.2019.107603 ↗
7. A physically based constitutive model for predicting the surface integrity in machining of Waspaloy10.1016/j.matdes.2018.04.069 ↗
8. Mapping of three-dimensional residual stresses by neutron diffraction in nickel-based superalloy discs prepared under different quenching conditions
9. Surface residual stress and microstructure evolutions of Hastelloy X alloy after severe shot peening10.1016/j.vacuum.2021.110136 ↗
10. Reveling the orientation preference along with localized Lüders-type deformation in polycrystalline NiTi SMA by in-situ synchrotron-based high energy X-ray diffraction10.1016/j.vacuum.2023.112921 ↗
11. On the residual stress relaxation in Inconel 718 superalloys at high temperature by real-time neutron diffraction10.1016/j.matdes.2023.112135 ↗
12. Microstress evolution during in-situ loading of a superalloy containing high volume fraction of γ' phase10.1016/S1359-6462(02)00504-3 ↗
13. The effect of Mo on load partitioning and microstrain evolution during compression of a series of polycrystalline Ni-based superalloys10.1016/j.actamat.2019.07.002 ↗
14. The role of stress relaxation and creep during high temperature deformation in Ni-base single crystal superalloys–implications to strain build-up during directional solidification10.1016/j.actamat.2016.01.032 ↗
15. In-situ neutron diffraction during stress relaxation of a single crystal nickel-base superalloy10.1016/j.scriptamat.2017.01.002 ↗
16. Stress relaxation in a nickel-base superalloy at elevated temperatures with in-situ neutron diffraction characterization: application to additive manufacturing10.1016/j.msea.2017.12.058 ↗
17. Evidence of variation in slip mode in a polycrystalline nickel-base superalloy with change in temperature from neutron diffraction strain measurements10.1016/j.actamat.2007.01.013 ↗
18. FIT2D: a multi-purpose data reduction, analysis and visualization program10.1107/S1600576716000455 ↗
19. Lattice strain evolution in a high volume fraction polycrystal nickel superalloy10.1016/j.scriptamat.2012.05.015 ↗
20. Phase evolution and thermal expansion behavior of a γ′ precipitated Ni-based superalloy by synchrotron x-ray diffraction10.1007/s40195-021-01321-2 ↗
21. In situ synchrotron diffraction study of a crack-free additively manufactured Ni base superalloy10.1016/j.scriptamat.2021.113896 ↗
22. Deformation behavior of nickel-based superalloys with bimodal γ′ size distribution studied by in-situ neutron diffraction combined with EVPSC modeling10.1016/j.jallcom.2023.173382 ↗
23. Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys10.1016/j.matdes.2015.09.152 ↗
24. Deformation mechanisms in Ni-based superalloys at room and elevated temperatures studied by in situ neutron diffraction and electron microscopy10.3390/met11050719 ↗
25. Elastic microstrains during tension and creep of superalloys: results from in situ neutron diffraction
26. Microstructure evolution and dynamic softening mechanisms during high-temperature deformation of a precipitate hardening Ni-based superalloy10.1016/j.vacuum.2018.06.068 ↗
27. Synchrotron diffraction characterization of dislocation density in additively manufactured IN 718 superalloy10.1016/j.matchar.2021.111379 ↗
28. Microscale observation via high-speed X-ray diffraction of alloy 718 during in situ laser melting
29. γ′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction10.1016/j.scriptamat.2023.115665 ↗
30. Influence of the initial cooling rate from γ′ supersolvus temperatures on microstructure and phase compositions in a nickel superalloy10.1016/j.jallcom.2017.10.263 ↗