journal article·2025-08Open access

Rarefied gas flows in complex microfluidic 3D-structures fabricated via additive manufacturing

Franz Schweizer, Klaus Bade, Lucien Baldas, Samuel Bergdolt, Stéphane Colin, Celine Deutschbein, Stefan Hengsbach, Jan G. Korvink, Marcos Rojas-Cárdenas, Jürgen J. Brandner

Vacuum· Volume 238

Abstract

In this work, two-photon-polymerization (TPP) is introduced as a method for manufacturing three-dimensional devices for rarefied gas flow applications. The novel 3D manufacturing capabilities of TPP are demonstrated by the fabrication of a microfluidic structure that consists of a circular micro-tube with a varying radius (tapered channel). The micro-tube has interesting features, such as a conical structure with one order of magnitude difference between minimum and maximum radii, that is 14 μ m and 215 μ m , respectively, and a very high aspect ratio, that is defined as the length over the minimum radius, of 72.3. To our knowledge, this is the first time that such a geometrical configuration has been successfully tested for rarefied gas flow applications. It supports the suitability of the presented fabrication method for further 3D new-generation applications in the field. The geometrical characteristics of the device were measured by μ -tomography and subsequently analyzed allowing the assessment of the geometrical precision of the fabrication method. From a fluid dynamics perspective, the device was tested by imposing pressure-driven gas flows in the converging and diverging directions of the structure for a wide range of rarefaction. The flow parameters linked to the structure, such as mass flow rates and conductances, were obtained experimentally using the constant volume technique. The experimental results were compared to numerical simulations obtained via Computational Fluid Dynamics solving the Navier–Stokes equation in the slip and hydrodynamic flow regimes. The experimental vs. numerical comparison showed good agreement within geometrical uncertainty. • Complex microfluidic structure fabrication via Two-Photon polymerization. • Gas flows in micro-tapered-tubes, experimental and numerical results. • Tomography characterization of complex mesoscale structures. • CFD results for diverging and converging rarefied gas flows. • Conductance and diodicity experimental results for a large range of rarefaction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gas Dynamics and Kinetic Theory · Lattice Boltzmann Simulation Studies · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Pneumatic pumping of liquids using thermal transpiration for lab-on-a-chip applications
2. A monolithic Si-micromachined four-stage Knudsen pump for μ GC applications10.1088/1361-6439/abd264 ↗
3. A capacitive micro gas flow sensor based on slip flow
4. Demonstration of a gas separator composed of Knudsen pumps10.1016/j.vacuum.2015.12.015 ↗
5. Single-phase gas flow in microchannels
6. Measurements of pressure gradient and temperature gradient driven flows in a rectangular channel10.1017/jfm.2021.586 ↗
7. The gas flow diode effect: theoretical and experimental analysis of moderately rarefied gas flows through a microchannel with varying cross section10.1007/s10404-014-1445-4 ↗
8. Cost and time-efficient microdevice fabrication process for rarefied gas flow applications10.1063/5.0245358 ↗
9. Experimental and numerical study of gas flow through microchannel with 90% bends10.1088/1361-6439/ac7b0d ↗
10. Slip flow through a converging microchannel: experiments and 3D simulations10.1088/0960-1317/25/2/025015 ↗
11. Measurements of tangential momentum accommodation coefficient for various gases in plane microchannel10.1063/1.3253696 ↗
12. Measurements and modeling of the gas flow in a microchannel: influence of aspect ratios, surface nature, and roughnesses10.1007/s10404-019-2259-1 ↗
13. Experimental and computational study of gas flow delivered by a rectangular microchannels leak10.1016/j.measurement.2015.06.011 ↗
14. Isothermal mass flow measurements in microfabricated rectangular channels over a very wide Knudsen range10.1088/0960-1317/24/5/055013 ↗
15. Studies on gas flow through smooth microchannel surface – fabrication, characterization, analysis, and tangential momentum accommodation coefficient comparison10.1080/01457632.2018.1546952 ↗
16. High Knudsen number fluid flow at near-standard temperature and pressure conditions using precision nanochannels10.1007/s10404-010-0682-4 ↗
17. Gaseous slip flow in long microchannels10.1109/84.585795 ↗
18. A time-dependent method for the measurement of mass flow rate of gases in microchannels10.1016/j.ijheatmasstransfer.2017.11.147 ↗
19. Gas flow through microtubes with different internal surface coatings10.1116/1.4828955 ↗
20. Experiments on rarefied gas flows through tubes10.1007/s10404-008-0311-7 ↗
21. Mass flow rate measurements in microtubes: From hydrodynamic to near free molecular regime10.1063/1.3562948 ↗
22. Experimental measurement on tangential momentum accommodation coefficient in a single microtube10.1007/s10404-011-0773-x ↗
23. Tangential momemtum accommodation in microtube10.1007/s10404-007-0158-3 ↗
24. Initial results from the first MEMS fabricated thermal transpiration-driven vacuum pump
25. A planar cascading architecture for a ceramic Knudsen micropump
26. Thermal transpiration in mixed cellulose ester membranes: Enabling miniature, motionless gas pumps10.1016/j.micromeso.2010.12.042 ↗
27. A directly moldable, highly compact, and easy-for-integration 3D micromixer with extraordinary mixing performance10.1021/acs.analchem.3c00335 ↗
28. Optimization of a suspended two photon polymerized microfluidic filtration system10.1016/j.mee.2018.04.001 ↗
29. Acoustic vibration-induced actuation of multiple microrotors in microfluidics10.1002/admt.202000323 ↗
30. Acoustofluidic stick-and-play micropump built on foil for single-cell trapping10.1039/C9LC00484J ↗
31. 3D micro-structures for rarefied gas flow applications manufactured via two-photon-polymerization10.1016/j.vacuum.2023.111915 ↗
32. Numerical modeling of axisymmetric and three-dimensional flows in MEMS nozzles
33. Thermally driven pumps and diodes in multistage assemblies consisting of microchannels with converging, diverging and uniform rectangular cross sections10.1007/s10404-020-02357-z ↗
34. Rarefied gas flow through a long tube of variable radius10.1116/1.1897703 ↗
35. Rarefied gas flow through a long rectangular channel of variable cross section10.1016/j.vacuum.2013.07.047 ↗
36. Rarefied gas flow through a diverging conical pipe into vacuum10.1016/j.vacuum.2013.07.030 ↗
37. Rarefied gas flow into vacuum through linearly diverging and converging channels10.1016/j.ijheatmasstransfer.2022.123842 ↗
38. Numerical study of rarefied gas flow in diverging channels of finite length at various pressure ratios10.3390/fluids9030078 ↗
39. Pressure-driven nitrogen flow in divergent microchannels with isothermal walls10.3390/app11083602 ↗
40. DSMC investigation of rarefied gas flow through diverging micro- and nanochannels10.1007/s10404-017-1855-1 ↗
41. Recent developments in the use of two-photon polymerization in precise 2D and 3D microfabrications10.1002/pat.664 ↗
42. Three-dimensional optical laser lithography beyond the diffraction limit10.1002/lpor.201100046 ↗
43. A review on the processing accuracy of two-photon polymerization10.1063/1.4916886 ↗
44. Time-dependent methodology for non-stationary mass flow rate measurements in a long micro-tube: Experimental and numerical analysis at arbitrary rarefaction conditions10.1007/s10404-017-1920-9 ↗
45. A new method to measure the thermal slip coefficient10.1016/j.ijheatmasstransfer.2015.05.009 ↗
46. Experimental analysis of velocity slip at the wall for gas flows of nitrogen, R134a, and R600a through a metallic microtube10.1016/j.ijrefrig.2016.02.006 ↗
47. Slip length measurement of gas flow10.1088/0957-4484/27/37/374004 ↗
48. Thermal transpiration flow through a single rectangular channel10.1017/jfm.2014.70 ↗
49. Time-dependent experimental analysis of a thermal transpiration rarefied gas flow10.1063/1.4813805 ↗
50. An experimental and numerical study of the final zero-flow thermal transpiration stage10.1299/jtst.7.437 ↗
51. A novel experimental setup for gas microflows10.1007/s10404-009-0447-0 ↗
52. Velocity boundary condition at solid walls in rarefied gas calculations10.1103/PhysRevE.70.017303 ↗
53. Data on the velocity slip and temperature jump on a gas-solid interface10.1063/1.3580290 ↗
54. A review of backward-facing step (BFS) flow mechanisms, heat transfer and control10.1016/j.tsep.2018.04.004 ↗
55. Simulation of gas flow in microchannels with a sudden expansion or contraction10.1017/S0022112005003691 ↗
56. Gas flow through an elliptical tube over the whole range of the gas rarefaction10.1016/j.euromechflu.2007.07.003 ↗
57. Non-isothermal flow of rarefied gas through a long pipe with elliptic cross section10.1007/s10404-008-0325-1 ↗
58. Pressure- and temperature-driven flow through triangular and trapezoidal microchannels10.1080/01457632.2011.562455 ↗