journal article·2025-03Open access

Study of the optimal deposition conditions of Ag(O2) and Ag(N2) seed layers on ultrathin silver transparent conductive films

Ana Cueva, Enrique Carretero

Vacuum· Volume 233

Abstract

In this study, ultrathin Ag layers were analyzed for their use as conductive films, which were fabricated via magnetron sputtering on a glass substrate and protected with aluminum-doped zinc oxide (AZO). These layers were obtained using seed layers made of silver deposited by adding small amounts of oxygen or nitrogen prior to the deposition of the metallic silver layer. This study aimed to determine the optimal amount of gas needed to maximize the conductivity and transparency properties of the conductive films with varied silver thicknesses. The optimal characteristics of the studied samples were verified using spectrophotometric, sheet resistance measurements, and surface morphology techniques. It was concluded that a smaller amount of silver required a higher amount of gas to be introduced into the seed layer. Besides, to fabricate an optimal conductive film, it is necessary to deposit 5.9 or 5.2 nm of silver with a seed layer obtained with a O 2 partial pressure of 1.7 × 10 −4 mbar, or 5.2 or 4.7 nm of silver with a seed layer obtained using a N 2 partial pressure of 4.2 × 10 −4 mbar. These samples provide sheet resistance values between 13.0 Ω/sq and 17.6 Ω/sq and transmission between 86.2 % and 87.3 % at 550 nm. • Ultrathin silver transparent conductive coatings with different thicknesses were deposited on glass substrates. • Ag(O 2 ) and Ag(N 2 ) seed layers were prepared and compared with Ge and GeO 2 seed layers. • Different O 2 and N 2 flows were tested and compared. • Visible transmission and sheet resistance were measured and surface morphology techniques were employed. • Lower thickness requires a higher gas flow. Depending on the thickness, one type of seed layer works better than others.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties · Nanomaterials and Printing Technologies · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Improvement of transparent metal top electrodes for organic solar cells by introducing a high surface energy seed layer10.1002/aenm.201200903 ↗
2. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
3. High-performance large-scale flexible optoelectronics using ultrathin silver films with tunable properties10.1021/acsami.9b08289 ↗
4. Spray-deposited large-area copper nanowire transparent conductive electrodes and their uses for touch screen applications10.1021/acsami.6b02652 ↗
5. Transparent conductive electrodes for electrochromic devices: a review10.1007/BF00331211 ↗
6. Visibly transparent heaters10.1021/acsami.5b11026 ↗
7. Transparent electrodes for organic optoelectronic devices: a review10.1117/1.JPE.4.040990 ↗
8. Ultrathin metal films for transparent electrodes of flexible optoelectronic devices10.1002/adfm.201606641 ↗
9. Dielectric properties of ultrathin metal films around the percolation threshold10.1103/PhysRevB.81.035402 ↗
10. Morphology of thin silver film grown by dc sputtering on Si(001)10.1088/0022-3727/31/23/001 ↗
11. STM studies of nucleation and the initial stages of film growth10.1080/10408439008242185 ↗
12. Combinatorial study of gradient Ag–Al thin films: microstructure, phase formation, mechanical and electrical properties10.1021/acsami.6b10659 ↗
13. High-performance doped silver films: overcoming fundamental material limits for nanophotonic applications
14. Ultrasmooth and thermally stable silver-based thin films with subnanometer roughness by aluminum doping10.1021/nn503577c ↗
15. On the effect of copper as wetting agent during growth of thin silver films on silicon dioxide substrates10.1016/j.apsusc.2020.148056 ↗
16. Manipulation of thin metal film morphology on weakly interacting substrates via selective deployment of alloying species10.1116/6.0001700 ↗
17. Bulk-like Al/Ag bilayer film due to suppression of surface plasmon resonance for high transparent organic light emitting diodes10.1016/j.orgel.2016.03.002 ↗
18. Study on ultrathin silver film transparent electrodes based on aluminum seed layers with different structures10.3390/nano12193540 ↗
19. Ultra-thin silver transparent conductive film based on aluminum infiltration layer10.5768/JAO202243.0505002 ↗
20. E-beam deposited ultra-smooth silver thin film on glass with different nucleation layers: an optimization study for OLED micro-cavity application10.1016/j.orgel.2010.03.022 ↗
21. Resistivity scaling transition in ultrathin metal film at critical thickness and its implication for the transparent conductor applications10.1002/aelm.202100970 ↗
22. Ultrastable and atomically smooth ultrathin silver films grown on a copper seed layer10.1021/am303147w ↗
23. Ultra-thin ultra-smooth and low-loss silver films on a germanium wetting layer10.1364/OE.18.005124 ↗
24. Ultrasmooth silver thin films deposited with a germanium nucleation layer10.1021/nl8027476 ↗
25. Enhanced surface plasmon resonance on a smooth silver film with a seed growth layer10.1021/nn100466p ↗
26. Use of tin as a surfactant material for the growth of thin silver films on silicon oxide10.1016/j.susc.2008.02.027 ↗
27. Ultrasmooth metal nanolayers for plasmonic applications: surface roughness and specific resistivity10.1364/AO.53.00B237 ↗
28. Ashok
29. Transparent ultrathin oxygen-doped silver electrodes for flexible organic solar cells10.1002/adfm.201301359 ↗
30. Manipulation of thin silver film growth on weakly interacting silicon dioxide substrates using oxygen as a surfactant10.1116/6.0000244 ↗
31. Ultrasmooth ultrathin Ag films by AlN seeding and Ar/N2 sputtering for transparent conductive and heating applications10.1063/1.5052261 ↗
32. 3D-to-2D morphology manipulation of sputter-deposited nanoscale silver films on weakly interacting substrates via selective nitrogen deployment for multifunctional metal contacts10.1021/acsanm.0c00736 ↗
33. Ultrathin silver film electrodes with ultralow optical and electrical losses for flexible organic photovoltaics10.1021/acsami.8b08578 ↗
34. Bellido
35. Optical properties in mid-infrared range of silicon oxide thin films with different stoichiometries10.3390/nano13202749 ↗
36. Unravelling the effect of nitrogen on the morphological evolution of thin silver films on weakly-interacting substrates10.1016/j.apsusc.2023.159209 ↗
37. Silver-island films as substrates for enhanced Raman scattering: effect of deposition rate on intensity10.1021/ac00003a010 ↗
38. Introduction of a novel figure of merit for the assessment of transparent conductive electrodes in photovoltaics: exact and approximate form10.1002/aenm.202100875 ↗
39. New figure of merit for transparent conductors10.1063/1.323240 ↗
40. Plasmonic hot spots: nanogap enhancement vs. focusing effects from surrounding nanoparticles10.1364/OE.20.014656 ↗
41. Role of gap size and gap density of the plasmonic random gold nanoisland ensemble for surface-enhanced Raman spectroscopy10.2320/matertrans.MD201701 ↗
42. Gold nano-island platforms for localized surface plasmon resonance sensing: a short review10.3390/molecules25204661 ↗
43. Preparation of nanostructured ultrathin silver layer10.1117/1.3562568 ↗
44. The Formation of thin continuous films from isolated nuclei, Z krist
45. Structure and growth of crystalline superlattices: from monolayer to superlattice10.1103/PhysRevB.33.3657 ↗
46. Review of the fundamentals of thin-film growth10.1364/AO.41.003053 ↗
47. Coalescence dynamics of 3D islands on weakly-interacting substrates10.1038/s41598-020-58712-1 ↗
48. Dynamic competition between island growth and coalescence in metal-on-insulator deposition10.1063/1.4900575 ↗