journal article·2022-01

Research on vacuum properties of CuCrZr UHV flanges for the Hefei Advanced Light Facility

Baoyuan Bian, Sihui Wang, Wei Wei, Yuanzhi Hong, Le Fan, Bangle Zhu, Xiaoqin Ge, Yigang Wang, Jianwei Fang, Wenli Zhang, Lei Shang, Yong Wang

Vacuum· Volume 195
Publisher page

Abstract

Abstract Hefei Advanced Light Facility (HALF), one of the Diffraction-Limited Storage Rings (DLSR), requires low-impedance flanges to be welded with Oxygen-free with Ag (OFS) vacuum chamber. In this paper, CuCrZr alloy as flange material and spring energized metal C-ring sealing structure are proposed. Two types of CuCrZr flanges have been designed, which are chain clamp and bolted flange, respectively. Chain clamp flanges are planed for compact areas, due to its small axial dimension. Bolted flanges with better positioning ability are designed to place in sections without space limitation. A series of leak rate and outgassing rate measurements were performed, and force and finite element analyses were carried out. Leak rates of both two flanges are lower than 5 × 10 − 13 P a m 3 s − 1 after 10 times seal-changing tests and 15 times same-seal bakeout cycles. Required fastening torques of chain clamp and bolted flange are 5–7 N m and 3–5 N m, respectively, in order to achieve sealing. The outgassing rate of CuCrZr is about an order of magnitude less than that of stainless steel after bakeout to 250 °C. The simulation results indicate that stress on the CuCrZr flange is far lower than metal C-ring due to the large deformation of the seal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Superconducting Materials and Applications · Particle Accelerators and Free-Electron Lasers · Electromagnetic Launch and Propulsion Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. DLSR design and plans: an international overview10.1107/S1600577514011515 ↗
2. Preliminary design of HEPS storge ring vacuum tubes and components
3. Proposed upgrade of the SLS storage ring
4. Vacuum system design for the SIRIUS storage ring
5. The MAX IV storage ring project10.1107/S1600577514011503 ↗
6. Conceptual design of a storage ring vacuum system compatible with implementation of a seven bend achromat lattice at the APS
7. Attaining an ultralow outgassing rate of 10-12 Pa m3 s-1 m-2 from an oxygen-free high conductivity copper tube with beryllium-copper-alloy flanges10.1116/1.579455 ↗
8. Development of copper-alloy Matsumoto-Ohtsuka-type vacuum flanges and its application to accelerator beam pipes10.1116/1.3237149 ↗
9. Investigation of vacuum properties of CuCrZr alloy for high-heat-load absorber10.1016/j.nima.2016.10.025 ↗
10. Application of a Matsumoto-Ohtsuka-type vacuum flange to beam ducts for future accelerators10.1116/1.2101808 ↗
11. A high power helicon antenna design for DIII-D[J]10.1080/15361055.2017.1347459 ↗
12. ITER ECRH upper launcher torus diamond window-Prototyping, testing and qualification10.1016/j.fusengdes.2015.02.002 ↗
13. Efficient continuous wave accelerating structure for ion beams10.1103/PhysRevAccelBeams.23.042002 ↗
14. Mechanical design and analysis of the proposed APEX2 VHF CW electron gun
15. The vacuum system of the China spallation neutron source10.1016/j.vacuum.2018.04.046 ↗
16. Double-double bend achromat cell upgrade at the Diamond Light Source: from design to commissioning10.1103/PhysRevAccelBeams.21.050701 ↗
17. Installation of normal-conducting RF accelerating cavities into the SuperKEKB positron damping ring
18. Lattice design challenges for fourth-generation storage-ring light sources10.1107/S1600577514015203 ↗
19. Shigley · 1985
20. Outgassing of vacuum materials-II10.1016/0042-207X(75)91653-X ↗
21. Measurement system for low outgassing materials byswitching between two pumping paths10.1016/0042-207X(96)00149-2 ↗
22. Titanium alloy material with very low outgassing10.1116/1.1590966 ↗
23. In situ deoxidization/oxidization of a copper surface: a new concept for attaining ultralow outgassing rates from a vacuum wall10.1116/1.579430 ↗
24. Experimental tests of the vacuum sealing performance of the ConFlat flange 25 for the HL-2M divertor pipeline circuit10.1016/j.vacuum.2020.109747 ↗
25. Compression recovery performance of spring energized C-rings10.1177/0954408914535572 ↗
26. Numerical and experimental analysis of the reusability of spring energized metal c rings10.1007/s11431-014-5584-3 ↗