journal article·2021-08

Microstructure and mechanical properties of TiNbFeCoAl alloys prepared by semi-solid sintering assisted by thermo-mechanical field

L.M. Kang, X. Pang, H.G. Tan, Y.F. Qiu, H.L. Liu, X.C. Luo, Z.J. Li, C. Yang

Vacuum· Volume 190
Publisher page

Abstract

Abstract In this study, the semi-solid sintering of TiNbFeCoAl amorphous powder was carried out by hot isostatic pressing (HIP) and spark plasma sintering (SPS), both of which are assisted by thermo-mechanical field, and finally two alloys with eutectic structure were prepared. The results show that the SPSed and HIPed alloys are composed of hypoeutectic (local ultra-fine lamellar eutectic β-Ti + TiFe and residual spherical β-Ti) and equiaxed Ti2Co phase. However, the size of hypoeutectic structure in SPSed alloy is about one third of that in HIPed alloy, and the size of the Ti2Co phase is not much different. Moreover, the Ti2Co phase in SPSed alloy is uniformly dispersed, while that in HIPed alloy is more likely to gather at the β-Ti grain boundaries. In addition, compared with the HIPed alloy, there is an obvious orientation relationship between the eutectic lamellae of SPSed alloy, which exhibits higher yield strength (1580 ± 6 MPa) and larger plastic strain (26.2 ± 0.6%). The failure analysis shows that eutectic structure can effectively prevent the propagation of micro cracks and mainly contribute to the yield strength of the alloys, while the stable phase boundaries, spherical β-Ti and dispersed Ti2Co particles mainly contribute to the strength and plasticity of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Lutjering · 2005
2. An ideal ultrafine-grained structure for high strength and high ductility10.1080/21663831.2014.968680 ↗
3. Microstructure evolution and mechanical behavior of severe shot peened commercially pure titanium10.1016/j.vacuum.2014.08.004 ↗
4. ZrO 2 (3Y) toughened WC composites prepared by spark plasma sintering10.1016/j.jallcom.2013.03.259 ↗
5. Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type Laves and β phases10.1016/j.matdes.2018.10.049 ↗
6. Equiaxed grained structure: a structure in titanium alloys with higher compressive mechanical properties10.1016/j.msea.2013.05.066 ↗
7. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
8. Enhanced ductility of a bimodal grain structure Ti-22Al-25Nb alloy fabricated by spark plasma sintering: enhanced ductility of a bimodal grain structure10.1002/adem.201600804 ↗
9. Bimodal eutectic titanium alloys: microstructure evolution, mechanical behavior and strengthening mechanism10.1016/j.msea.2017.05.102 ↗
10. High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity10.1016/j.msea.2018.07.031 ↗
11. Bimorphic microstructure in Ti-6Al-4V alloy manipulated by spark plasma sintering and in-situ press forging10.1016/j.scriptamat.2020.10.035 ↗
12. High strength Ti–Fe–Sn ultrafine composites with large plasticity10.1016/j.scriptamat.2007.03.031 ↗
13. Hot deformation and dynamic recrystallization of a near-beta titanium alloy in the β single phase region
14. Microstructure evolution during warm working of Ti–6Al–4V with a colony-α microstructure10.1016/j.actamat.2009.02.016 ↗
15. Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening
16. Designing ultrafine lamellar eutectic structure in bimodal titanium alloys by semi-solid sintering10.1016/j.jallcom.2017.01.257 ↗
17. A review on high‐strength titanium alloys: microstructure, strengthening, and properties10.1002/adem.201801359 ↗
18. Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering10.1016/j.actamat.2017.04.062 ↗
19. Non-isothermal and isothermal crystallization kinetics and their effect on microstructure of sintered and crystallized TiNbZrTaSi bulk alloys10.1016/j.jnoncrysol.2015.11.005 ↗
20. Effect of WC content on glass formation, thermal stability, and phase evolution of a TiNbCuNiAl alloy synthesized by mechanical alloying10.1557/JMR.2008.0087 ↗
21. Fabrication of biomedical Ti–35Nb–7Zr–5Ta alloys by mechanical alloying and spark plasma sintering10.1179/1743290111Y.0000000021 ↗