journal article·2021-07

Effect of CuI on the thermoelectric properties of recycled n-type Bi2(Te, Se)3 scraps

Shan Yun, Tan Guo, Huaju Li, Xiaoyan Gao, Aibin Huang, Litao Kang

Vacuum· Volume 189
Publisher page

Abstract

Abstract In this work, n-type Bi2(Te, Se)3-based thermoelectric recycled samples were fabricated from scraps by adding some content of CuI (x wt.%, x = 0, 2, 4) via melting and SPS sintering method. Carrier concentration of the samples doped with CuI can be improved while the values of κL+κB were decreased at high temperature. A lowest κL+κB value of 0.41 W m−1 K−1 at 500 K was obtained for sample with 4 wt% CuI. Samples doped with CuI parallel to the pressing direction had higher PF values and similar ZT values compared with the sample without CuI at 500 K, while that of vertically CuI doped samples was reduced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Complex thermoelectric materials10.1038/nmat2090 ↗
2. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
3. Advances in thermoelectric materials research: looking back and moving forward10.1126/science.aak9997 ↗
4. Recent advances in thermoelectric nanocomposites10.1016/j.nanoen.2011.10.001 ↗
5. High thermoelectric potential of Bi2Te3 alloyed GeTe- rich phases10.1063/1.4958973 ↗
6. Criteria for extending the operation periods of thermoelectric converters based on IV-VI compounds10.1016/j.jssc.2016.06.006 ↗
7. High temperature thermoelectric properties evolution of Pb1-xSnxTe based alloys10.1016/j.jallcom.2017.06.075 ↗
8. Development of Bi2Te2.4Se0.6 alloy for thermoelectric power generation applications10.1016/j.jallcom.2016.04.072 ↗
9. Thermoelectric properties in the quasi-binary MnSi1.73-FeSi2 system10.1007/s11664-014-3500-z ↗
10. Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys10.1063/1.3097026 ↗
11. Enhancement of thermoelectric figure-of-merit by a bulk nanostructuring approach10.1002/adfm.200901512 ↗
12. Experimental studies on anisotropic thermoelectric properties and structures of n-type Bi2Te2.7Se0.310.1021/nl101156v ↗
13. Bismuth telluride nanotubes and the effects on the thermoelectric properties of nanotube-containing nanocomposites10.1063/1.1863440 ↗
14. Recent progress towards high performance of tin chalcogenide thermoelectric materials10.1039/C7TA09941J ↗
15. Synthesis of alumina nanoparticle-embedded-bismuth telluride matrix thermoelectric composite powders10.1016/j.matlet.2012.05.053 ↗
16. n-Type Bi2Te3-xSex nanoplates with enhanced thermoelectric efficiency driven by wide-frequency phonon scatterings and synergistic carrier scatterings10.1021/acsnano.6b01156 ↗
17. Attaining high mid-temperature performance in (Bi,Sb)2Te3 thermoelectric materials via synergistic optimization10.1038/am.2016.134 ↗
18. Practical high-performance (Bi,Sb)2Te3-based thermoelectric nanocomposites fabricated by nanoparticle mixing and scrap recycling10.1021/acsami.0c01014 ↗
19. Thermoelectric properties and low-energy carrier filtering by Mo microparticle dispersion in an n-type (CuI)0.003Bi2(Te,Se)3 bulk matrix10.1021/acsami.0c09529 ↗
20. Possible charge density wave and enhancement of thermoelectric properties at mild-temperature range in n-type CuI-doped Bi2Te2.1Se0.9 compounds10.1021/acsami.9b19398 ↗
21. Lattice distortion and anisotropic thermoelectric properties in hot-deformed CuI-doped Bi2Te2.7Se0.310.1016/j.jallcom.2019.152649 ↗
22. Enhancement of thermoelectric properties in CuI-doped Bi2Te2.7Se0.3 by hot-deformation10.1016/j.jallcom.2017.10.016 ↗
23. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe10.1126/science.aad3749 ↗