journal article·2015-10

Practical requirements for the successful implementation and subsequent dissemination of the redefined kilogram

Stuart Davidson, James Berry, Kilian Marti

Vacuum· Volume 120
Publisher page

Abstract

In the next few years the world's measurement system, the SI, will be changing. One of the most significant changes will be the replacement of the existing definition of the kilogram, which depends on the stability of an artefact made in the 19th century, with a definition based on a constant, the Planck constant h, which lies at the heart of modern quantum physics. This change will strengthen, stabilise, and reunify the SI and, in addition, provide advantages to science and engineering. The kilogram is the last of the seven base units of the SI to be defined in terms of a material artefact rather than by relation to an invariant of nature. Progress is being made towards a redefinition in terms of the Planck constant realised via the watt balance and Avogadro experiments. The accuracy of these experiments is nearing that required by the mass community (2 parts in 108) and it is likely that the redefinition will be ratified in late 2018. While ensuring the long term stability of the unit of mass, the change to the definition of the kilogram presents issues which need to be addressed in order to effectively implement the redefinition, to ensure continuity of the mass scale and to efficiently disseminate the new definition to the user community. After redefinition the realisation of the SI unit of mass will be possible via either the Avogadro or watt balance approaches. The two experiments work in a vacuum and so a link between mass standards in air (such as the International Prototype Kilogram used to realise the current mass unit) and standards realised in vacuum will need to be established for initially fixing the Planck constant and subsequently for dissemination of the unit of mass. This paper describes research undertaken to prepare for the redefinition. Next generation mass standards, compatible with use in vacuum, have been developed to improve mass stability while optimising vacuum/air transfer characteristics. Methods for the transfer between and storage in vacuum, inert gas and air have been investigated both gravimetrically and using surface analysis techniques such as X-ray photoelectron spectroscopy (XPS) and ellipsometry to characterise surface sorption effects. Additionally new cleaning techniques for primary mass standards using UV activated ozone and low pressure plasma have been developed to replace current manual cleaning methods. The implementation of this research will ensure the maximum benefit is realised from the redefinition of the kilogram in terms of a fundamental constant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Scientific Measurement and Uncertainty Evaluation · Sensor Technology and Measurement Systems · Advanced Sensor Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Calibration campaign against the international prototype of the kilogram in anticipation of the redefinition of the kilogram part I: comparison of the international prototype with its official copies10.1088/0026-1394/52/2/310 ↗
2. Recommendation of the Consultative Committee for Mass and Related Quantities submitted to the International Committee for Weights and Measures: Recommendation G 1 (2013) On a New Definition of the Kilogram.
3. A determination of Planck's constant using the NRC watt balance10.1088/0026-1394/51/2/S5 ↗
4. Determination of the Planck constant using a watt balance with a superconducting magnet system at the National Institute of Standards and Technology10.1088/0026-1394/51/2/S15 ↗
5. Improved measurement results for the Avogadro constant using a 28Si-enriched crystal10.1088/0026-1394/52/2/360 ↗
6. A measurement of the gyromagnetic ratio of the proton by the strong field method
7. Steiner · 2013 · 76
8. Thermal desorption of gases10.1016/0042-207X(62)90978-8 ↗
9. Determination of the effect of transfer between vacuum and air on mass standards of platinum–iridium and stainless steel10.1088/0026-1394/47/4/015 ↗
10. Berry · 2013
11. Discussion of correction for gas adsorption
12. Measurement of water adsorption layers on metal surfaces10.1088/0026-1394/18/3/007 ↗
13. Methods to determine water vapour sorption on mass standards10.1088/0026-1394/41/4/016 ↗
14. Girard · 1990
15. The third periodic verification of national prototypes of the kilogram (1988–1992)10.1088/0026-1394/31/4/007 ↗
16. Cleaning of mass standards: a comparison of new and old techniques10.1088/0026-1394/49/6/628 ↗
17. Cleaning of mass standards: II. A comparison of new techniques applied to actual and potential new materials for mass standards10.1088/0026-1394/50/1/83 ↗
18. UV/ozone cleaning of platinum/iridium kilogram mass prototypes10.1088/0026-1394/47/4/006 ↗
19. Comparison of UV/ozone cleaning of platinum/iridium kilogram mass standards with nettoyage-lavage cleaning10.1088/0026-1394/48/3/012 ↗
20. Evaluation of equipment and procedures for the transfer and storage of mass standards in inert gas10.1088/0026-1394/48/5/021 ↗
21. Determination of the effect of transfer between vacuum and air on mass standards of platinum–iridium and stainless steel10.1088/0026-1394/47/4/015 ↗