journal article·2025-02Open access

IPFOA-MKSVM and BA-MLP models for predicting closed busbar temperatures in high voltage nuclear power plants in different vacuum environments

Zuoxun Wang, Guojian Zhao, Jinxue Sui, Wangyao Wu, Chuanzhe Pang, Liteng Xu

Vacuum· Volume 232

Abstract

The nuclear power closed busbar is a key power transmission component in the power system, and its high temperature may cause equipment failure. In this paper, for the temperature prediction of nuclear power closed busbar under vacuum environment, a multi-core support vector machine model optimized by the improved falcon predation algorithm and a multi-layer perceptron model enhanced by the back propagation algorithm are proposed. The vacuum pump is used to reduce the air pressure in the closed space to achieve a vacuum state. The collected data are preprocessed to improve the accuracy and stability of the model. In addition, the PSO and SVM models are used to compare and verify the superiority of the proposed model. The data set is divided into a training set and a test set. The results show that under different vacuum degrees, the prediction accuracy and stability of the IPFOA-MKSVM model are better than those of other models, but its error is slightly higher than the physical calculation result. Finally, the performance of the model in wind speed prediction is verified, and compared with several models to verify the accuracy of IPFOA-MKSVM under different vacuum and wind speed conditions. • Select a suitable vacuum pump, adjust its speed and power, and create vacuum environments with different concentrations in the nuclear power closed busbar system. Collect historical temperature data under medium and rough vacuum conditions. • Preprocess the collected data and propose IPFOA-MKSVM and BA-MLP models. Train and debug the models using processed data to enhance prediction accuracy and stability. Compare these models with others, using working state data from a regional power plant. Divide the dataset into training and test sets. • Establish a physical model to analyze heat transfer mechanisms: thermal convection dominates in rough vacuum conditions, while thermal radiation is primary in medium vacuum. • Experimental results demonstrate that IPFOA-MKSVM and BA-MLP achieve superior prediction accuracy and stability in both vacuum conditions, outperforming other models.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal Analysis in Power Transmission · High voltage insulation and dielectric phenomena · High-Voltage Power Transmission Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Exploration of key technologies for equipment operation and maintenance based on new power systems10.1016/j.ijft.2023.100482 ↗
2. The development of a C 2B2Csharing economy platform: a case study of China's Airparking10.1016/j.im.2024.103960 ↗
3. Numerical study on temperaturerise and structure optimization for a three-phase gas insulated switchgear busba chamber
4. 2 - a thorough review of PV performance, influencing factors, and mitigation strategies; advancements in solar PV systems
5. A review on radiofrequency, laser, and microwave ablations and their thermal monitoring through fibre Bragg gratings10.1016/j.isci.2023.108260 ↗
6. A simple method to estimate maximum temperature for water-cooled busbar with soft connector10.1016/j.fusengdes.2023.113520 ↗
7. Chapter five - semiconductor nano wiresfor thermoelectric generation
8. Design and simulation analysis of physical heat dissipation structure for welding robot controller
9. Chao Wang,Review: radiation temperature measurement methodsfor engine turbine blades and environment influence10.1016/j.infrared.2022.104204 ↗
10. Non-intrusive interpretation of umanti-hermal comfort through analysis of facial infrared thermography,Energy an hermal comfort through analysis of facial infrared thermography10.1016/j.enbuild.2018.07.025 ↗
11. Liquid crystal-embedded fibre optic fabry perot temperature sensor based on Vernier effect,Measureme er optic fabry perot temperature sensor based on Vernier effect10.1016/j.measurement.2023.113910 ↗
12. Polymer opticalfiber and fibre Bragg grating sensors for biomedical engineering applications: a comprehensive review
13. Investigation on performance of RGB point cloud and thermal information data fusion for 3D building thermal map modelling using aerial images under different experimental conditions
14. Spatial interpolation-based analysis method targeting visualisation of the indoor thermal environment,Buildingmethod targeting visualisation of the indoor thermal environment10.1016/j.buildenv.2020.107484 ↗
15. Application of new features based on artificial intelligent robot technology in medium-scale urban design pedigree and intelligent management and control
16. Machine anddeep learning methods for concrete strength Prediction: a bibliometric and content analysis review of research trends and future directions10.1016/j.asoc.2024.111956 ↗
17. A nutrient optimisation method for hydroponic lettuce based on multi-strategy improved grey wolf optimizer algorithm10.1016/j.compag.2024.109167 ↗
18. An artificial intelligence-based electric multiple units using a smart power grid system10.1016/j.egyr.2022.09.138 ↗
19. Comparative performance characteristics between a vane and a rotary piston type mechanical vacuum pump10.1016/S0042-207X(69)92109-5 ↗
20. Vacuum system design, construction, and operation for the cornell high energy synchrotron source upgrade10.1016/j.vacuum.2021.110064 ↗
21. Automation of cleaning and ensembles for outliers detection in questionnaire data10.1016/j.eswa.2022.117809 ↗
22. An anatomization on breast cancer detection and diagnosis employing multi-layer perceptron neural network (MLP) and Convolu tional neural network (CNN)
23. Chapter 18 - neural networks and deep learning
24. Prediction of a Lorenz chaotic attractor using two-layer perceptron neural network10.1016/j.asoc.2004.07.005 ↗
25. Land use land cover changedetection a nd urban sprawl prediction for Kuwait metropolitan region, using multi-layer perceptron neural networks (MLPNN)
26. A theory of local learning, the learning channel, andthe o ptimality of backpropagation10.1016/j.neunet.2016.07.006 ↗
27. Desirebackpropagation: a lightweight training algorithm for multi-layer spiking neural networks basedon spike-timing-dependent plasticity10.1016/j.neucom.2023.126773 ↗
28. Physics-data combined machine learning for parametric reduced-order modelling of nonlinear dynamical systems in small-data regimes
29. Bounded quantile loss for robust support vector machines-based classification and regression10.1016/j.eswa.2023.122759 ↗
30. BAFL-SVM: a blockchain-assisted federated learning- driven SVM framework for smart agriculture10.1016/j.hcc.2024.100243 ↗
31. A novelhybrid CNN-SVM method for lithology identification in shale reservoirs based on logging measurements10.1016/j.jappgeo.2024.105346 ↗
32. A novel recognition system for human activit basedon wavelet packet and support vector machine optimized by imprved adaptive geneticalgorithm10.1016/j.phycom.2014.04.006 ↗
33. A novel particle swarm optimisation trained supportvector machine for automatic sense-through-foliage target recognition system10.1016/j.knosys.2014.04.005 ↗
34. A constrained optimization based extreme learning machine for noisy data regression10.1016/j.neucom.2015.07.065 ↗
35. Machine learning model based on non-convex penalised huberized-SVM
36. Scalable, accurate image annotation with joint SVMs and output kernels10.1016/j.neucom.2014.11.096 ↗
37. Multiplekernel-based multi-instance learning algorithm for image classification10.1016/j.jvcir.2014.03.011 ↗
38. A novel error-output recurrent two-layer extreme learning machine for multi-step time series prediction
39. A novel technique for leaf disease classification using Legion Kernels with parallel support vector machine (LK-PSVM) and fuzzy C means imagesegmentation10.1016/j.heliyon.2024.e32707 ↗
40. Multi-subswarm cooperative particle swarm optimisation algorithm and its applicability,Information Sciences,Volume ation10.1016/j.ins.2024.120887 ↗
41. A novel hybrid particle swarm optimisation with marine predators10.1016/j.swevo.2023.101375 ↗
42. A parallel particleswarm optimisation and enhanced sparrow search algorithm for unmanned aerialvehicle path planning10.1016/j.heliyon.2023.e14784 ↗
43. ACEPSO: a multiple adaptive co-evolved particle swarm optimisation for solving engineering problems
44. An efficient Balanced Teaching-Learning-Based optimisation algorithm with Individual restarting strategy for solving global optimisation problems10.1016/j.ins.2021.06.064 ↗
45. Bat inspired algorithm based optimal design of model predictive load frequency control10.1016/j.ijepes.2016.04.036 ↗
46. enemos-p: an enhancedemotion specific prediction for recommender systems10.1016/j.eswa.2023.120190 ↗
47. Longitudinal dependence of the forecast accuracy of the ionospheric total electron content in the equatorial zone, Geodetic and geophysical studies. zone10.1016/j.geog.2024.02.001 ↗