journal article·2023-06Open access

Vacuum chamber conditioning and saturation simulation tool (VacuumCOST): Enabling time-dependent simulations of pressure and NEG sticking in UHV chambers

P.L. Henriksen, M. Ady, R. Kersevan

Vacuum· Volume 212

Abstract

Modern particle accelerators, synchrotrons, and other machines requiring UHV frequently make use of NEG coatings to achieve low pressures and resulting high beam stability and lifetime. It is the nature of NEG pumps and coatings, that a limited amount of gas can be pumped before saturation is reached, at which point the NEG must be re-activated to pump efficiently again. While the pumping mechanism and absorption limits are well understood and software packages exist for simulating the steady-state vacuum systems, there is a need for simulating the temporal evolution of the pumping capability of NEG coatings in regions of high outgassing rates such as near crotch absorbers. This paper presents a simple framework, written in Python, for running time-dependent simulations of NEG-coated vacuum systems in molecular flow, by making use of the command-line interface of the already widely used MolFlow simulation software. It also compares simulation results with accelerator pressure measurements.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Particle Accelerators and Free-Electron Lasers · Particle accelerators and beam dynamics · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. C. Benvenuti, Getter pumping, in: Proc. CERN Accelerator School, Platja D’Aro, Spain, 2006.
2. C. Benvenuti, Non-Evaporable Getters: From Pumping Strips to Thin Film Coatings, in: Proc. EPAC 1998, Stockholm, 1998.
3. Ti–Zr–V non-evaporable getter films: From development to large scale production for the Large Hadron Collider10.1016/j.tsf.2005.12.218 ↗
4. Synchrotron radiation-induced desorption from a NEG-coated vacuum chamber10.1016/S0042-207X(00)00247-5 ↗
5. Vacuum system design, construction, and operation for the Cornell high energy synchrotron source upgrade10.1016/j.vacuum.2021.110064 ↗
6. 2022
7. M. Ady, R. Kersevan, Introduction to the latest version of the test-particle Monte Carlo code molflow+, in: Proc. IPAC’14, pp. 2348–2350.
8. R. Kersevan, M. Ady, Recent developments of Monte-Carlo codes molflow+ and synrad+, in: Proc. IPAC’19.
9. Ady · 2014
10. Kinetics of hydrogen uptake for getter materials10.1016/j.vacuum.2003.12.155 ↗
11. Commissioning and operation status of the MAXIV 3GeV storage ring vacuum system10.1107/S1600577521002599 ↗
12. Gas desorption from an oxygen free high conductivity copper vacuum chamber by synchrotron radiation photons10.1116/1.579265 ↗
13. Lucarelli · 2022
14. Room-temperature pumping characteristics of a Zr–Al nonevaporable getter for individual gases10.1116/1.575541 ↗
15. Prodromides · 2002