In-situ thermal cleaning of the sapphire substrate and temperature effect on epitaxial AlN
Source abstract
Abstract
The impact of thermal surface cleaning on epitaxial AlN thin films grown on sapphire is investigated in this study at various temperatures. The sapphire substrate is cleaned in a hydrogen environment. Structural, optical, and surface morphology properties of the samples are investigated by using high-resolution X-ray diffraction, Raman spectroscopy, UV–visible spectroscopy, and atomic force microscopy, respectively. Because wastes from the surface of sapphire, which begins to decompose after 1200 ◦C, cannot be entirely removed at such a low temperature, grain distribution and grain size in the nucleation layer are impacted. Moreover, when a sapphire is cleaned at a high temperature, the rate of breakdown of oxygen atoms from the surface rises, and islands appear on the surface. Roughnesses on the sapphire surface cause misoriented grains and deteriorated the structure. The surface of the sapphire, which is cleaned at 1245 ◦C, was both sufficiently cleaned and not etched too much, uniformly distributed, and large-sized particles formed in the nucleation layer. Thus, the AlN thin film has grown with high quality in terms of structure, optics, and surface. Experimental results have demonstrated that the insitu thermal cleaning temperature has a critical influence on the properties of the AlN.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Acoustic Wave Resonator Technologies · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Improved structural quality of AlN grown on sapphire by 3D/2D alternation growth10.1016/j.jcrysgro.2017.01.053 ↗
2. Influence of temperature and Al/N ratio on structural, chemical & electronic properties of epitaxial AlN films grown via PAMBE10.1016/j.apsusc.2018.06.070 ↗
3. Influence of the nucleation layer morphology on the structural property of AlN films grown on c-plane sapphire by MOCVD10.1016/j.jallcom.2016.12.126 ↗
4. Self-catalytic growth of AlN microrods on sapphire substrate10.1016/j.jcrysgro.2016.12.098 ↗
5. AlN MEMS filters with extremely high bandwidth widening capability10.1038/s41378-020-00183-5 ↗
6. Experimental determination of the rates of decomposition and cation desorption from AlN surfaces10.1016/S0921-5107(01)00720-6 ↗
7. Defect and stress characterization of AlN films by Raman spectroscopy10.1063/1.2404938 ↗
8. Design and preparation of AlN/GaN quantum wells for quantum cascade laser applications10.1143/JJAP.44.5918 ↗
9. Influence of metallic surface states on electron affinity of epitaxial AlN films10.1016/j.apsusc.2017.02.128 ↗
10. Progress on AlGaN-based solar-blind ultraviolet photodetectors and focal plane arrays
11. Crystalline structure of AlGaN epitaxy on sapphire using AlN buffer layers10.1063/1.112724 ↗
12. Critical thickness of AlN thin film grown on Al2O3 (0001)10.1143/JJAP.40.4677 ↗
13. Analysis of growth rate and crystal quality of AlN epilayers by flow-modulated metal organic chemical vapor deposition10.1016/j.spmi.2019.106336 ↗
14. Realization of low dislocation density AlN on a small-coalescence-area nano-patterned sapphire substrate10.1039/C8CE01788C ↗
15. Direct growth of thick AlN layers on nanopatterned Si substrates by cantilever epitaxy
16. Enhanced lateral growth of AlN epitaxial layer on sapphire by introducing periodically pulsed-TMGa flows10.1016/j.spmi.2019.05.034 ↗
17. Improved crystalline quality of AlN epitaxial layer on sapphire by introducing TMGa pulse flow into the nucleation stage10.1016/j.jcrysgro.2018.03.020 ↗
18. Growth of AlN on sapphire: predicting the optimal nucleation density by surface kinetics modeling10.1063/1.5127193 ↗
19. Cleaning of AlN and GaN surfaces10.1063/1.368814 ↗
20. Cleaning of GaN surfaces10.1007/BF02666640 ↗
21. Plasma preconditioning of sapphire substrate for GaN epitaxy10.1016/S0921-5107(96)01878-8 ↗
22. Effect of treatments of sapphire substrate on growth of GaN film10.1016/j.apsusc.2004.10.135 ↗
23. Effects of initial thermal cleaning treatment of a sapphire substrate surface on the GaN epilayer10.1143/JJAP.38.2721 ↗
24. Growth and characterization of PALE Si-doped AlN on sapphire substrate by MOVPE10.1016/j.mssp.2022.106464 ↗
25. The effect of Si (111) substrate surface cleaning on growth rate and crystal quality of MOVPE grown AlN10.35378/gujs.822954 ↗
26. In situ gravimetric monitoring of decomposition rate on surface of (1012) R-plane sapphire for high-temperature growth of nonpolar AlN10.1143/JJAP.47.3434 ↗
27. In situ gravimetric monitoring of decomposition rate on the surface of (0001) c‐plane sapphire for the high temperature growth of AlN10.1002/pssc.200674816 ↗
28. Effects of sapphire annealing on the structural properties of AIN thin films grown by molecular beam epitaxy10.1016/j.physb.2009.12.060 ↗
29. Sandwich method to grow high quality AlN by MOCVD10.1088/1361-6463/aaa926 ↗
30. Nucleation layer temperature effect on AlN epitaxial layers grown by metalorganic vapour phase epitaxy10.1007/s10854-021-07016-9 ↗
31. Sapphire substrate misorientation effects on GaN nucleation layer properties10.1016/j.jcrysgro.2004.08.113 ↗
32. Effect of initial condition on the quality of GaN film and AlGaN/GaN heterojunction grown on flat sapphire substrate with ex-situ sputtered AlN by MOCVD10.1016/j.vacuum.2022.111063 ↗
33. Heteroepitaxy mechanisms of AlN on nitridated c-and a-plane sapphire substrates10.1063/1.4977108 ↗
34. Effects of growth pressure on the characteristics of the β-Ga2O3 thin films deposited on (0001) sapphire substrates10.1016/j.mssp.2020.105572 ↗
35. Effect of annealing on the properties of Ga2O3: Mg films prepared on α-Al2O3 (0001) by MOCVD10.1016/j.vacuum.2015.06.032 ↗
36. In-situ and ex-situ face-to-face annealing of epitaxial AlN10.1016/j.vacuum.2022.111284 ↗
37. Nitrogen concentrations on structural and optical properties of aluminum nitride films deposited by reactive RF-magnetron sputtering
38. Effect of growth temperature on structure and optical characters of NiO films fabricated by PA-MOCVD10.1016/j.vacuum.2012.05.006 ↗
39. Epitaxial growth and characterization of high quality In2O3 films on a-plane sapphire substrates by MOCVD10.1016/j.vacuum.2019.05.035 ↗
40. Influence of annealing on the structural and optical properties of gallium oxide films deposited on c-sapphire substrate10.1016/j.vacuum.2019.05.034 ↗
41. Influence of AlN thickness on AlGaN epilayer grown by MOCVD10.1016/j.spmi.2016.08.053 ↗
42. Raman effect of corundum10.1063/1.1711980 ↗
43. Influence of the texture on Raman and X-ray diffraction characteristics of polycrystalline AlN films10.1016/j.tsf.2008.07.029 ↗
44. Raman spectroscopy of sputtered AlN films: E 2 (high) biaxial strain dependence10.1063/1.2335582 ↗
45. Optical phonon decay in bulk aluminum nitride10.1063/1.2219092 ↗
46. Vibrational properties of AlN grown on (111)-oriented silicon10.1103/PhysRevB.63.125313 ↗
47. Influence of the PALE growth temperature on quality of MOVPE grown AlN/Si (111)10.1016/j.mssp.2021.105733 ↗
48. Effect of AlN buffer on the properties of AlN films grown on sapphire substrate by MOCVD
49. Reduction of residual stress in AlN thin films synthesized by magnetron sputtering technique10.1016/j.matchemphys.2017.07.072 ↗
50. Analysis of growth rate and crystal quality of AlN epilayers by flow-modulated metal organic chemical vapor deposition10.1016/j.spmi.2019.106336 ↗
51. Thickness dependence of the properties of highly c-axis textured AlN thin films10.1116/1.1649343 ↗