journal article·2021-12

An ultra-high aspect ratio BTO nanowires synthesized via slowing the release of barium ions

Lifan Nie, Long Zhang, Quan Zhou, Zi'ang Zhang, Zhaobo Dong, Qingyi Liu, Limei Yang, Shaohui Zhang, Zeng Liu, Gebo Pan

Vacuum· Volume 194
Publisher page

Abstract

Abstract Normally, the synthesis of the BaTiO3 nanowires is via the ion exchange of K2Ti8O17 nanowires with Ba2+ under hydrothermal conditions. The concentration of the Ba2+ should be maintained at a low concentration to slow the ion exchange for preventing the crush of templates, thus reducing the quality and yield of the nanowires. In this paper, insoluble barium salt, that is, barium carbonate (BaCO3) powder was used as a Ba2+ sustained release agent, which can release a sufficient amount of Ba2+ and keep the low concentration of Ba2+ for ion exchange. The BaTiO3 nanowires with an ultra-high aspect ratio were prepared by this strategy. Thereafter, XRD, SEM, etc. Were used to characterize the as-obtained samples. Results showed that the obtained nanowires possess an average diameter of 11.6 nm and length up to several microns. Compared with other easily soluble barium salts, BaCO3 can reduce the cation exchange rate and increase the nucleation and growth of BaTiO3 nanowires. Additionally, reliable and reproducible experimental phenomenon showed that the above method has obvious advantages in large-scale production and high consistency, which provides an essential strategy for the application of BaTiO3 nanowires in flexible electronic devices, especially in capacitive sensors, film-type capacitors, and energy-storage devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Advanced Sensor and Energy Harvesting Materials · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Chemical structures and performance of perovskite oxides10.1021/cr980129f ↗
2. General approach to well-defined perovskite MTiO3 (M= Ba, Sr, Ca, and Mg) nanostructures10.1021/jp110660v ↗
3. Influence of Sm doping on structural, ferroelectric, electrical, optical and magnetic properties of BaTiO310.1016/j.vacuum.2020.109872 ↗
4. BaTiO3 nanostructures for H2S gas sensor: influence of band-gap, size and shape on sensing mechanism10.1016/j.vacuum.2017.08.008 ↗
5. Electroceramic materials10.1016/S1359-6454(99)00293-1 ↗
6. Impact of Ba/Ti ratio on the magnetic properties of BaTiO3 ceramics10.1016/j.vacuum.2018.10.063 ↗
7. Effect of calcination temperature and atmosphere on crystal structure of BaTiO3 nanofibers10.1007/s12540-010-0616-4 ↗
8. Facile synthesis of BaTiO3 nanotubes and their microwave absorption properties10.1021/am300069x ↗
9. Hydrothermally synthesized barium titanate nanostructures from K2Ti4O9 precursors: morphology evolution and its growth mechanism10.1016/j.materresbull.2014.05.043 ↗
10. Phase-and shape-controlled synthesis of VO2 by a hydrothermal-calcination method10.1016/j.vacuum.2020.109352 ↗
11. Thermodynamic modeling of hydrothermal synthesis of ceramic powders10.1021/cm00025a014 ↗
12. Kinetic study of the static hydrothermal synthesis of BaTiO3 using titanate nanotubes precursors10.1021/cg101466u ↗
13. Template-free hydrothermal synthesis of single-crystalline barium titanate and strontium titanate nanowires10.1002/smll.200500055 ↗
14. Synthesis of high aspect ratio BaTiO3 nanowires for high energy density nanocomposite capacitors10.1002/aenm.201200808 ↗
15. Growth mechanism of shape-controlled barium titanate nanostructures through a soft chemical reaction10.1021/cg700795q ↗
16. Effective enhancement of piezocatalytic activity of BaTiO3 nanowires under ultrasonic vibration10.1016/j.nanoen.2017.12.034 ↗
17. Ultrathin BaTiO3 nanowires with high aspect ratio: a simple one-step hydrothermal synthesis and their strong microwave absorption10.1021/am4014506 ↗
18. Interplay between size, composition, and phase transition of nanocrystalline Cr3+-doped BaTiO3 as a path to multiferroism in perovskite-type oxides10.1021/ja2091678 ↗
19. Raman scattering studies on nanocrystalline BaTiO3 Part I-isolated particles and aggregates10.1002/jrs.1764 ↗
20. Temperature dependence of the A1 and E optical phonons in BaTiO310.1002/pssb.2220790240 ↗
21. Solvothermal synthesis and curie temperature of monodispersed barium titanate nanoparticles10.1016/j.matchemphys.2010.08.063 ↗
22. Template‐free, low‐temperature synthesis of crystalline barium titanate nanoparticles under bio‐inspired conditions10.1002/ange.200602571 ↗
23. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
24. Activation energy and its fluctuations at grain boundaries of Er3+: BaTiO3 perovskite thin films: effect of doping concentration and annealing temperature10.1016/j.vacuum.2021.110562 ↗
25. Tailored activity of Ce–Ni bimetallic modified V2O5/TiO2 catalyst for NH3-SCR with promising wide temperature window10.1016/j.vacuum.2021.110384 ↗
26. X-ray photoelectron spectroscopic investigations on cubic BaTiO3, BaTi0.9Fe0.1O3 and Ba0.9Nd0.1TiO3 systems10.1016/j.apsusc.2008.05.316 ↗
27. Characteristics of the low electron density surface layer on BaTiO3 thin films10.1063/1.2828339 ↗
28. Surfactant-free hydrothermal synthesis of highly tetragonal barium titanate nanowires: a structural investigation10.1021/jp0600110 ↗
29. BaTiO3–graphene nanocomposites: synthesis and visible light photocatalytic activity10.1039/C4NJ02272F ↗
30. Highly-flexible piezoelectric nanogenerators with silver nanowires and barium titanate embedded composite films for mechanical energy harvesting10.1016/j.apenergy.2018.09.009 ↗
31. Facile preparation of uniform barium titanate (BaTiO3) multipods with high permittivity: impedance and temperature dependent dielectric behavior10.1039/C3RA44815K ↗
32. Mechanisms of the shape evolution of Cd Se nanocrystals10.1021/ja0027766 ↗
33. Synthesis and characterization of cubic BaTiO3 nanorods via facile hydrothermal method and their optical properties
34. Selected-control synthesis of ZnO nanowires and nanorods via a PEG-assisted route10.1021/ic034029q ↗
35. PEGylated inorganic nanoparticles10.1002/anie.201002969 ↗
36. Synthesis and characterization of single-crystalline alkali titanate nanowires10.1021/ja0519841 ↗
37. Hydrothermal synthesis and characterization of potassium/sodium titanate nanofibres at different temperatures, Micro
38. Size-controlled one-dimensional monocrystalline BaTiO3 nanostructures10.1063/1.3159817 ↗
39. Hydrothermal synthesis of barium titanate nano/micro rods and particle agglomerates using a sodium titanate precursor10.1016/j.ceramint.2020.12.011 ↗
40. Hydrogen titanate nanofibers covered with anatase nanocrystals: a delicate structure achieved by the wet chemistry reaction of the titanate nanofibers10.1021/ja048204t ↗