Degeneration and damage mechanism of Pseudomorphic Glass under 170 keV proton irradiation
Source abstract
Abstract
Abstract As the covering layer of flexible solar cells, Pseudomorphic Glass (PMG) needs brilliant optical, mechanical and radiation protection properties to ensure the long-term stable operation of cells. In this paper, the evolution law and mechanism analysis of PMG optical and mechanical properties under 170 keV proton irradiation were studied systematically. The surface morphology and the occurrence of cracks before and after irradiation were observed by OLYMPUS optical microscope and SEM. The degradation characteristics of PMG optical performance were researched by comparing the changes of RTV sheet and PMG transmittance. FT-IR and XPS were used to study the vicissitudes of surface composition and chemical bonds, and based on this, the degradation and crosslinking mechanism of silicon rubber molecular chains after proton irradiation was given. In addition, the stress-strain test was selected to characterize the mechanical properties of PMG.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Diamond and Carbon-based Materials Research · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Analytical modeling of the flexible rim of space antenna reflectors10.1134/S0021894417050194 ↗
2. World's first spaceflight on-orbit demonstration of a flexible solar array system based on shape memory polymer composites10.1007/s11431-020-1681-0 ↗
3. Zarafshan · 2011 · 718
4. Vergnet · 2019 · 2808
5. Long · 2021
6. Fabrication of flexible silicon thin film solar modules by substrate transfer technology10.1016/j.vacuum.2013.11.005 ↗
7. Influence of Ge layer location on performance of flexible CZTSSe thin film solar cell10.1016/j.vacuum.2019.04.026 ↗
8. Effect of evaporated CdS layer on formation and performance enhancement of flexible Cu2ZnSn(S,Se)4 solar cells
9. EMCORE four-junction inverted metamorphic solar cell development
10. Analysis for efficiency potential of high-efficiency and next-generation solar cells10.1002/pip.2955 ↗
11. Novel flexible solar cell coverglass for space photovoltaic devices
12. Optical and electrical properties of pseudomorphic glass
13. Pseudomorphic glass to enable high efficiency space photovoltaic devices
14. Conductive space solar cell coverglass replacement technology
15. Evaluating the emissivity of pseudomorphic glass (PMG)
16. Post-flight analysis of MISSE-8 advanced photovoltaic technologies
17. Radiation tolerant nanowire array solar cells10.1021/acsnano.9b05213 ↗
18. Electrostatic discharge threshold on coverglass used to protect solar cells in the low earth orbit10.1109/TPS.2018.2885926 ↗
19. Effects of rapid thermal annealing on the optical properties of strain-free quantum ring solar cells10.1186/1556-276X-8-5 ↗
20. Effect of 200 keV proton irradiation on the properties of methyl silicone rubber10.1016/j.radphyschem.2004.09.022 ↗
21. Damage effects and mechanisms of proton irradiation on methyl silicone rubber10.1016/j.matchemphys.2003.09.043 ↗
22. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
23. The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy10.1038/s41598-021-90780-9 ↗
24. Compromising science by ignorant instrument calibration-need to revisit half a century of published XPS Data10.1002/anie.201916000 ↗
25. Effect of ultraviolet-A radiation on surface structure, thermal, and mechanical and electrical properties of liquid silicone rubber10.1002/app.47652 ↗
26. Fabrication of a wrinkled surface on poly(dimethylsiloxane) using a thermal curing process10.7567/JJAP.52.06GK11 ↗
27. Inducement of a spontaneously wrinkled polydimethylsiloxane surface and its potential as a cell culture substrate10.1016/j.colsurfb.2018.06.026 ↗
28. Light-modulated surface micropatterns with multifunctional surface properties on photodegradable polymer films10.1021/acsami.7b10573 ↗
29. Blistering of tungsten films deposited by magnetron sputtering after helium irradiation10.1016/j.fusengdes.2018.02.091 ↗
30. Radiation effect of 150 keV protons on methyl silicone rubber reinforced with MQ silicone resin10.1016/j.nimb.2006.02.017 ↗
31. Effect of vacancy defect clusters on the optical property of the aluminium filter used for the space solar telescope
32. Damage effect of keV proton irradiation on aluminized Kapton film10.1016/j.radphyschem.2007.08.007 ↗
33. Degradation of polyimide under irradiation with swift heavy ions10.1016/j.nimb.2005.04.019 ↗
34. Preparation and atomic oxygen erosion resistance of silica film formed on silicon rubber by sol-gel method10.1016/j.apsusc.2010.03.133 ↗
35. A method to improve the mechanical performance of styrene-butadiene rubber via vulcanization accelerator modified silica10.1016/j.compscitech.2015.05.012 ↗
36. Damage effect of space proton irradiation with the low energy of 50∼200 keV on methyl silicone rubber
37. Effect of silica particles modified by in-situ and ex-situ methods on the reinforcement of silicone rubber10.1016/j.matdes.2014.08.051 ↗
38. The effect of bound rubber on vulcanization kinetics in silica filled silicone rubber10.1039/C6RA20063J ↗