Microstructural and optical characterization of polymer nanotemplates with different morphologies
Source abstract
Abstract
Abstract The block copolymer (BCP) templates with nanoscale structures and diverse morphologies have attracted much attention for nanofabrication in photonic and plasmonic research fields. Herein, PS-b-PMMA BCP nanotemplates with different morphologies, including the patterns of hexagonal hole arrays, fingerprint stripes, and their mixture, are successfully prepared for in-depth microstructural and optical characterizations. Apart from direct microstructure observations and component characterization, ellipsometric measurements are mainly applied to characterize structural and optical evolution of these BCP nanotemplates undergoing different preparation stages. Interestingly, among different BCP nanotemplates, two typical reflectance peaks in the ultraviolet region (200–250 nm) are distinctly different from each other, due to their PS- and thickness-dependent optical behaviors. With the preparation proceeding, there are synchronous diminution in the intensity of the two peaks, accompanying with an obvious blue-shift for the shorter wavelength peak. In addition, the variation of refractive index and ellipsometric parameters greatly demonstrates morphology-dependent optical behaviors among different BCP nanotemplates. Finally, Au-covered BCP nanotemplates present the distinct template-morphology-dependent visible-light responses, demonstrating different light-matter interactions occurred in their plasmonic Au nanostructures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Block Copolymer Self-Assembly · Polymer Nanocomposite Synthesis and Irradiation · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Block copolymer lithography10.1021/ma401762n ↗
2. Three-dimensional line edge roughness in pre- and post-dry etch line and space patterns of block copolymer lithography10.1039/C9CP05398K ↗
3. Varying the hydrogen bonding strength in phenolic/PEO-b-PLA blends provides mesoporous carbons having large accessible pores suitable for energy storage10.1002/macp.202000040 ↗
4. Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems10.1039/D0CS00021C ↗
5. Recent advances in polymeric micelles for anti-cancer drug delivery10.1016/j.ejps.2015.12.031 ↗
6. Block copolymer prodrugs: synthesis, self-assembly, and applications for cancer therapy
7. Metal nanodot memory by self-assembled block copolymer lift-off10.1021/nl903340a ↗
8. AlGaN deep-ultraviolet light-emitting diodes with localized surface plasmon resonance by a high-density array of 40 nm Al nanoparticles10.1021/acsami.0c08916 ↗
9. Directed self-assembly of block copolymers on chemical patterns: a platform for nanofabrication10.1016/j.progpolymsci.2015.10.006 ↗
10. Microdomain orientation of PS-b-PMMA by controlled interfacial interactions10.1021/ma8007338 ↗
11. Effect of composition of substrate-modifying random copolymers on the orientation of symmetric and asymmetric diblock copolymer domains10.1021/ma8018393 ↗
12. Controlling the microdomain orientation in block copolymer thin films via cross-linkable random copolymer neutral layer10.1038/pj.2016.9 ↗
13. Fine tuning of lithographic masks through thin films of PS-b-PMMA with different molar mass by rapid thermal processing10.1021/am5003074 ↗
14. Perpendicular orientation of domains in cylinder-forming block copolymer thick films by controlled interfacial interactions10.1021/ma9002903 ↗
15. High temperature surface neutralization process with random copolymers for block copolymer self-assembly10.1002/pi.5285 ↗
16. GISAXS and GISANS as metrology technique for understanding the 3D morphology of block copolymer thin films10.1016/j.eurpolymj.2016.04.007 ↗
17. Nanowire length, density, and crystalline quality retrieved from a single optical spectrum10.1021/acs.nanolett.9b00165 ↗
18. Spectroscopic ellipsometry of columnar porous Si thin films and Si nanowires10.1016/j.apsusc.2016.12.063 ↗
19. In-situ Mueller matrix ellipsometry of silicon nanowires grown by plasma-enhanced vapor-liquid-solid method for radial junction solar cells10.1016/j.apsusc.2016.12.199 ↗
20. Cross-linked random copolymer mats as ultrathin nonpreferential layers for block copolymer self-assembly10.1021/la902483m ↗
21. Stable polymer brushes with effectively varied grafting density synthesized from highly crosslinked random copolymer thin films10.1039/C8RA04480E ↗
22. Block copolymer templated fabrication of TiO2 nanodot films using pulsed laser deposition10.1021/acs.jpcc.8b01605 ↗
23. PMMA removal options by wet development in PS-b-PMMA block copolymer for nanolithographic mask fabrication10.1116/1.4929548 ↗
24. Modification and degradation of polyethylene under the action of oxygen plasma10.1007/s10733-005-0067-5 ↗
25. Dual-wavelength lasing in quantum-dot plasmonic lattice lasers10.1021/acsnano.9b09698 ↗
26. Characteristics of micro- and nano-pores in shale oil reservoirs
27. Quantification of pore modification in coals due to pulverization using synchrotron small angle X-ray scattering10.1016/j.jngse.2020.103669 ↗
28. Fractal characteristics of pore structure of hardened cement paste prepared by pressurized compact molding10.1016/j.conbuildmat.2020.119856 ↗
29. Understanding the surface condition of gamma irradiated epoxy alumina nanocomposites adopting wavelets and fractal technique
30. Evaluation of dispersion of nano-CaCO(3)particles in polypropylene matrix based on fractal method10.1016/j.compositesa.2007.01.011 ↗
31. Fractal theory and controllable preparation of centimeter level silver nanowire arrays and their application in melamine detection as SERS substrates10.1016/j.saa.2019.117184 ↗
32. Thickness dependent native oxidation kinetics observation and prediction for Cu films using spectroscopic ellipsometry10.1016/j.apsusc.2020.146236 ↗
33. Comparing methods for measuring thickness, refractive index, and porosity of mesoporous thin films10.1016/j.micromeso.2019.109677 ↗
34. Parameter optimization of O-2/He atmospheric pressure plasma for surface modification of poly (L-lactic) acid oriented fiber membranes: improving cell adhesion and proliferation10.1016/j.vacuum.2020.109763 ↗
35. Fabrication of 60 wt% SiO2 filled hybrid nanocomposite and its application in erosion-corrosion and radiation resistance10.1016/j.vacuum.2021.110228 ↗
36. Characterization of ultrathin polymer films using p-polarized ATR-FTIR and its comparison with XPS10.1021/acs.langmuir.9b00316 ↗
37. Low energy B+ implantation induced optical and structural characteristics of aliphatic and aromatic polymers10.1016/j.vacuum.2018.10.058 ↗
38. Optical properties and van der Waals-London dispersion interactions of polystyrene determined by vacuum ultraviolet spectroscopy and spectroscopic ellipsometry10.1071/CH06222 ↗
39. VACUUM-ULTRAVIOLET absorption spectrum OF polystyrene10.1063/1.1701603 ↗
40. Tuning the absorption of ultraviolet spectra and optical parameters of aluminum doped PVA based solid polymer composites10.1007/s10854-015-3457-6 ↗
41. Effect of aging on adsorption behavior of polystyrene microplastics for pharmaceuticals: adsorption mechanism and role of aging intermediates10.1016/j.jhazmat.2019.121193 ↗
42. Transferrable plasmonic Au thin film containing sub-20 nm nanohole array constructed via high-resolution polymer self-assembly and nanotransfer printing10.1021/acsami.7b16401 ↗
43. Highly tunable refractive index visible-light metasurface from block copolymer self-assembly10.1038/ncomms12911 ↗
44. Comparison of different dispersion models for single layer optical thin film index determination10.1016/j.tsf.2011.07.028 ↗