journal article·2020-08

Influence of α- and β-W phases on performance of SMR devices

Qianhui Liu, Ying Sun, Haibo Guo, Franklin Li Duan, Zhi Yang, Yigang Chen

Vacuum· Volume 178
Publisher page

Abstract

Abstract Solidly mounted resonators (SMRs) rely on high-quality Bragg reflectors, for which tungsten has been used as the high acoustic impedance layer. It is unclear about the effects of tungsten phases on the acoustic performance of SMRs. In this study, high-quality flat layers of different phase structures of W (α-W and β-W) are obtained by changing the post-growth annealing temperature and magnetron sputtering parameters. Our results show that the α-W has higher Young's modulus and acoustic impedance (205 GPa and 63 kg/m2s) than β-W (170 GPa and 57 kg/m2s). These small differences result in amplified difference in acoustic performance of Bragg reflectors using tungsten (W) as their high-impedance layer. Our tests show that the SMR of α-W Bragg reflector has a higher return loss (18.4 dB) at around 2.75 GHz and higher quality factor (687) than that of β-W Bragg reflector (9.2 dB and 228, respectively).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · Electrical Contact Performance and Analysis · Physics of Superconductivity and Magnetism

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Face-mounted piezoelectric resonators10.1109/PROC.1965.3925 ↗
2. Development of piezoelectric thin film resonator and its impact on future wireless communication systems, Japanese10.1143/JJAP.44.2883 ↗
3. Effects of reflecting layers on resonance characteristics of a solidly mounted resonator with 1/4 λ mode configuration10.1007/s00339-009-5519-1 ↗
4. Effect of design parameters on thin film bulk acoustic resonator performance10.1007/s10832-014-9896-2 ↗
5. Novel design and performance of the solidly mounted resonator with an AlN-buffered ZnO piezoelectric film10.1016/j.vacuum.2018.03.050 ↗
6. Solidly mounted resonators fabricated for GHz frequency applications based on MgxZn1-xO piezoelectric film10.1016/j.vacuum.2017.04.012 ↗
7. AIN-based film bulk acoustic resonator devices with W/SiO2 multilayers reflector for rf bandpass filter application
8. Effects of thermal annealing of W/SiO[sub 2] multilayer Bragg reflectors on resonance characteristics of film bulk acoustic resonator devices with cobalt electrodes10.1116/1.1690248 ↗
9. Superconductivity in evaporated tungsten films10.1063/1.1651982 ↗
10. Creutz · Phys. Rev. Lett. · 1983 · 9 · 141110.1103/PhysRevLett.50.1411 ↗
11. Superconductivity in β-tungsten films10.1063/1.1656012 ↗
12. Structure and stability of sputter deposited beta-tungsten thin films10.1063/1.111318 ↗
13. Residual stress, microstructure, and structure of tungsten thin films deposited by magnetron sputtering10.1063/1.371841 ↗
14. Phase, grain structure, stress, and resistivity of sputter-deposited tungsten films
15. Phase transformation of sputter deposited tungsten thin films with A-15 structure10.1063/1.362584 ↗
16. Stress and stability of sputter deposited A-15 and BCC crystal structure tungsten thin films10.1557/PROC-472-233 ↗
17. Review and comparison of bulk acoustic wave FBAR, SMR technology