Study of thermal ageing effects on Rh coating's mechanical performance upon CuCrZr substrate through modeling and experimental methods
Source abstract
Abstract
Rhodium (Rh) coating on CuCrZr substrate is a promising material option for optical, structural and electrical applications on nuclear fusion reactors. For these applications, Rh coated CuCrZr components subject to long time of thermal ageing due to pre-treatment or normal operation condition. In this paper, both finite element method (FEM) and experimental method were applied to investigate the effects of thermal ageing on mechanical performance of Rh coating after 250 °C, 500 h baking in vacuum. Based on FEM analysis, thermal stresses which concentrate at Rh coating interface is the main source of cracking, and such stresses can be minimized efficiently by introducing a 0.5 μm Au interlayer into the coating layer structure. According to thermal ageing experiments, through-thickness cracking in the Rh coating due to thermal stress releasing and voids generated at the Rh bonding interface caused by Kirkendall effect were the main micro-structure changes in the coating system. The solid-solution hardening caused by significant Cu diffusion into Rh is the dominant factor that affected the Rh coating's hardness. The existing of large amount of cracks in the Rh coating and voids at the Rh coating interface deteriorated the adhesion performance of Rh on CuCrZr substrate by 30%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Kozlov · 2002
2. Deposition of thin rhodium films by plasma-enhanced chemical vapor deposition10.1007/BF00618901 ↗
3. Adhesion of rhodium films on metallic substrates10.1016/j.tsf.2008.04.087 ↗
4. Characterization of magnetron sputtered rhodium films for reflective coatings10.1016/j.surfcoat.2007.10.014 ↗
5. Rhodium coated mirrors deposited by magnetron sputtering for fusion applications10.1063/1.2800779 ↗
6. Diagnostic mirrors for ITER: a material choice and the impact of erosion and deposition on their performance10.1016/j.jnucmat.2007.01.281 ↗
7. Reflective metallic coatings for first mirrors on ITER10.1016/j.fusengdes.2010.12.038 ↗
8. Design aspects of the RF contacts for the LHC beam vacuum interconnects
9. R. D · 2008
10. Sliding force measurements on the LHC RF contact Plug
11. RF contact development for the ITER ICRH antenna10.1063/1.4864566 ↗
12. Steady state RF facility for testing ITER ICRH RF contact component10.1016/j.fusengdes.2013.03.050 ↗
13. R&D activities on RF contacts for the ITER ion cyclotron resonance heating launcher10.1016/j.fusengdes.2015.04.005 ↗
14. The ITER vacuum systems10.1088/1742-6596/114/1/012013 ↗
15. LHC: the world's largest vacuum systems being operated at CERN10.1016/j.vacuum.2009.05.015 ↗
16. Rossi · 2003
17. Plasma–surface interaction issues of an all-metal ITER10.1088/0029-5515/49/3/035007 ↗
18. Mechanical integrity in PVD coatings due to the presence of residual stresses10.1016/S0040-6090(01)01043-4 ↗
19. Failure modes in plasma-sprayed thermal barrier coatings10.1016/S0921-5093(02)00251-4 ↗
20. Residual stress within nanoscale metallic multilayer systems during thermal cycling10.1016/j.msea.2015.09.082 ↗
21. Thermal stress analysis of HVOF sprayed WC–Co/NiAl multilayer coatings on stainless steel substrate using finite element methods10.1016/j.jmatprotec.2007.03.115 ↗
22. Effects of residual stress on the performance of plasma sprayed functionally graded ZrO 2/NiCoCrAlY coatings10.1016/S0921-5093(99)00565-1 ↗
23. Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coating10.1016/S0040-6090(03)00427-9 ↗
24. Fabrication and buckling behavior of polycrystalline palladium, cobalt, and rhodium nanostructures10.1016/j.msea.2012.02.027 ↗
25. Alshehri · 2012
26. Simulation of thermal stress in magnetron sputtered thin coating by finite element analysis10.1016/j.jmatprotec.2004.09.093 ↗
27. Design of alternative multilayer thick thermal barrier coatings
28. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization10.1016/j.apsusc.2008.04.003 ↗
29. Slade · 2013
30. Braunovic · 2006
31. Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer10.1016/j.msea.2005.07.010 ↗
32. Microstructure characteristics in the interface zone of Ti/Al diffusion bonding10.1016/S0167-577X(02)00570-0 ↗
33. Fabrication of Ti–Al micro/nanometer-sized porous alloys through the Kirkendall effect10.1002/adma.200602398 ↗
34. Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD10.4236/wjnse.2012.23020 ↗
35. The relationship between hardness and abrasive wear resistance of electrodeposited nanocrystalline Ni–P coatings10.1016/S1359-6462(02)00633-4 ↗