Effects of TeOx films on temperature coefficients of delay of Love-type wave devices based on TeOx/36°YX-LiTaO3 structures
Source abstract
Abstract
Abstract Tellurium oxide (TeO x ) thin films are prepared on 36°YX-LiTaO 3 substrates by RF magnetron sputtering technique under different deposition conditions. The structures and compositions of the TeO x films are analyzed by X-ray diffraction, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, which show that the TeO x films are amorphous and with different ratios of Te to O prepared in different conditions. Then the Love-type wave devices based on TeO x /36°YX-LiTaO 3 structures are fabricated, and the temperature coefficient of delay (TCD) of the Love-type wave devices are investigated. The results show that, when TeO x films deposited at suitable deposition conditions, the TCD of the Love-type wave devices are less than that of the shear-horizontal (SH) wave devices fabricated on the bare 36°YX-LiTaO 3 substrates, which demonstrates that the TCD of the TeO x films is negative. Moreover, the TCD of the devices are strongly dependent upon the preparation conditions and the thicknesses of the TeO x films. Therefore, the TCD of the Love-type wave devices can be optimized by suitably selecting the preparation conditions and the thickness of TeO x films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photonic and Optical Devices · Photorefractive and Nonlinear Optics · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. SiO2 film overlays for temperature-stable surface acoustic wave devices10.1063/1.88076 ↗
2. Low loss wide band filters and resonator filters using high temperature stable high electromechanical coupling surface acoustic wave substrates
3. Experimental and theoretical investigation for temperature characteristics and propagation losses of SAWs on SiO2/Al/LiTaO3
4. Temperature coefficient of elastic constants of SiO2 over-layer on LiNbO3 for a temperature stable SAW device10.1088/0022-3727/36/15/304 ↗
5. Temperature compensation with AlN film on Y-128° LiNbO310.1143/JJAP.40.L471 ↗
6. Temperature stable LiNbO3 surface acoustic wave device with diode sputtered amorphous TeO2 overlayer10.1063/1.1944231 ↗
7. Temperature coefficient of elastic constants of sputtered TeO2 thin film for zero TCD SAW devices
8. Influence of temperature stability on the sensing properties of SAW NOx sensor10.1016/j.snb.2006.12.036 ↗
9. Propagation and resonance properties of Love-type surface acoustic wave on Y-X LiTaO3 with TeO2 thin film10.1143/JJAP.47.4060 ↗
10. Study on SAW characteristics of amorphous-TeO2/128°Y-X LiNbO3 structures10.1109/ULTSYM.2007.476 ↗
11. Temperature stable amorphous-TeO2/36°–46°Y-X LiTaO3 substrates for surface acoustic wave applications10.1063/1.2942381 ↗
12. Structural and morphological analysis of reactively sputtered tellurium suboxide thin films10.1016/0022-3093(93)90472-A ↗
13. Rf-sputtering growth of stoichiometric amorphous TeO2 thin films10.1002/crat.200410479 ↗
14. Stoichiometry changes in tellurium oxide films10.1016/0038-1098(84)91084-6 ↗
15. Growth of amorphous TeOx (2≤x≤3) thin film by radio frequency sputtering10.1063/1.2717139 ↗
16. Effects of conditions on the optical properties of thin films of tellurium oxide10.1088/0022-3727/35/9/312 ↗
17. Vibrational and structural properties of glass and crystalline phases of TeO210.1016/j.jnoncrysol.2003.08.052 ↗
18. Structural interpretations on tellurite glasses10.1016/S0254-0584(99)00196-0 ↗
19. Influence of γ-radiation doses on the properties of TeOx: (x=2–3) thin film10.1063/1.2769778 ↗
20. SH-type and Rayleigh-type surface waves on rotated Y-cut LiTaO3
21. Wasa · 1992