journal article·2024-06Open access

Effect of al/si multilayer foil on microstructure and mechanical properties of SiCр/Al composites vacuum diffusion bonded joints

Tetiana Melnychenko, Anatolii Ustinov, Iurii Falchenko, Lidiia Petrushynets

Vacuum· Volume 224

Abstract

The peculiarities of joint formation in vacuum diffusion bonding through an intermediate multilayer foil (MF) of Al/Si produced by electron beam physical vapour deposition (EB-PVD) in vacuum were studied on SiC р /Al aluminium matrix composites with different alloying systems of the aluminium matrix . It is shown that Al/Si interlayer enables making permanent joints without degradation of the composite properties at the temperature of 500°С, which corresponds to the start of intensive plastic deformation of the interlayer at thermomechanical loading. It is found that the microstructure and phase composition of the joint zone (JZ) depend on the interlayer and aluminium matrix of the composite. It is demonstrated that reduction of the bilayer thickness of Al/Si MF and its alloying by manganese ensures intensive mass transfer of the components in the butt joint and equivalent joint formation. The maximum value of shear strength was 105 MPa in the case of an interlayer with a nano-scale period of the layers.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Silicon carbide reinforced aluminium metal matrix composites for Aerospace applications: a literature review
2. Dissimilar welds between unreinforced AA6082 and AA6092/SiC/25p composite by pulsed-MIG arc welding using unreinforced filler alloys (Al–5Mg and Al–5Si)
3. Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminium matrix composites10.1016/S0266-3538(99)00168-2 ↗
4. Interface evolution and bond strength when diffusion bonding materials with stable oxide films10.1002/sia.1088 ↗
5. Kazakov · 1985
6. Shirzadi · 1997
7. New approaches for transient liquid phase diffusion bonding of aluminium based metal matrix composites10.1179/mst.1997.13.2.135 ↗
8. Transient liquid phase bonding of 2124 aluminium metal matrix composite10.1179/mst.1998.14.9-10.920 ↗
9. Transient liquid-phase diffusion bonding of aluminum metal matrix composite using a mixed Cu-Ni powder interlayer10.1007/s11665-011-0037-7 ↗
10. Pulse current auxiliary TLP diffusion bonding of SiCp/2024Al composite sheet using mixed Al–Cu–Ti powder interlayer10.1007/s00170-012-4299-5 ↗
11. Study of transient liquid-phase bonding of SiC particle reinforced aluminum matrix composite
12. Transient liquid phase diffusion bonding of 6061Al-15 wt.% SiCp composite using mixed Cu-Ag powder interlayer10.1007/s11665-016-2165-6 ↗
13. Diffusion bonding of discontinuously reinforced SiC/Al matrix composites: the role of interlayers10.4028/www.scientific.net/KEM.104-107.523 ↗
14. Investigation on diffusion bonding characteristics of SiC particulate reinforced aluminium metal matrix composites (Al/SiCp-MMC)10.1016/S1359-835X(99)00040-8 ↗
15. Study of the net shape diffusion welding mechanism of aluminum matrix composite SiCw/6061Al10.1163/156855403322667241 ↗
16. Study on non-interlayer liquid phase diffusion bonding for SiCp/ZL101 aluminum matrix composite
17. Reactive diffusion bonding of SiCp/Al composites by insert powder layers with eutectic composition10.1179/174328405X51631 ↗
18. Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers10.1016/j.jmatprotec.2007.02.028 ↗
19. Diffusion welding of aluminium alloy strengthened by Al2O3 particles through an Al/Cu multilayer foil10.1016/j.jmatprotec.2012.11.012 ↗
20. Structural mechanism of plastic deformation of Al/а-Si multilayer foils at heating under load10.1016/j.msea.2021.141030 ↗
21. Diffusion welding of γ-TiAl based alloys through nano-layered foil of Ti/Al system10.1016/j.intermet.2008.05.002 ↗
22. Davis · 1993
23. Effect of overall composition on thermally induced solid-state transformations in EB PVD Al/Ni multilayers10.1016/j.surfcoat.2008.01.024 ↗
24. Phase transformations in heating multi-layer foil Al/Cu produced by the method of electron beam deposition
25. Deformational behaviour of multilayer Ti/Al foils at heating under the conditions of continuously applied loads
26. Liquid phase bonding of aluminium and aluminium/Nicalon composite using copper interlayers10.1179/mst.1993.9.5.417 ↗
27. Tensile and fracture toughness properties of SiCp reinforced Al alloys: effects of particle size, particle volume fraction, and matrix strength10.1361/10599490421358 ↗
28. Effects of Mn addition on microstructure and hardness of Al–12.6Si alloy10.1088/1757-899X/338/1/012043 ↗
29. Formation of Al15Mn3Si2 phase during solidification of a novel Al-12%Si-4%Cu-1.2%Mn heat-resistant alloy and its thermal stability10.1007/s11665-018-3133-0 ↗