Grain boundary diffusion of Si in polycrystalline copper film
Source abstract
Abstract
Grain boundary (GB) diffusion of Si in polycrystalline Cu film was studied in the temperature range of 403–453 K, in the C-type kinetic regime. The amorphous Si layer (80 nm) and polycrystalline Cu layer (40 nm) were successively deposited by magnetron sputtering at room temperature onto a Si (111) wafer. Appearance of Si atoms on the copper surface due to GB diffusion through the copper layer was detected by low energy ion scattering spectroscopy with high sensitivity. The depth distribution of Si in Cu grain boundaries was revealed by secondary neutral mass spectrometry. Surface morphology of Cu films was investigated by scanning tunneling microscopy. Identification of Si chemical bonds on the surface layer was made by X-ray photoelectron spectroscopy. GB diffusion coefficients were estimated by the relation used for calculation of diffusant distribution from a constant source in assumption that the diffusion path equals to the film thickness at the moment of appearing Si atoms on the Cu surface. At 453 K we estimated the surface segregation factor and detected formation of Cu–O–Si atomic bonds on the Cu film surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and interfaces · Copper Interconnects and Reliability · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Measurement of grain boundary diffusion at low temperatures by the surface accumulation method. I. Method and analysis10.1063/1.326168 ↗
2. Measurement of grain boundary diffusion at low temperature by the surface accumulation method. II. Results for goldsilver system10.1063/1.326115 ↗
3. Influence of dislocations on diffusion kinetics in solids with particular reference to the alkali halides10.1039/tf9615701191 ↗
4. Determination of the diffusion coefficient of aluminium along the grain boundaries of gold films by the surface accumulation method10.1016/0040-6090(92)90482-Q ↗
5. Determination of grain boundary diffusion coefficients by Auger electron spectroscopy10.1016/S0169-4332(00)00194-X ↗
6. Investigation of Ta grain boundary diffusion in copper by means of Auger electron spectroscopy10.1016/j.tsf.2003.12.125 ↗
7. Determination of grain boundary diffusion coefficients in C-regime by Hwang-Balluffi method: silver diffusion in Pd10.4028/www.scientific.net/DDF.289-292.763 ↗
8. Surface composition analysis by low-energy ion scattering10.1016/j.surfrep.2006.12.002 ↗
9. Diffusion induced atomic islands on the surface of Ni/Cu nanolayers10.1016/j.apsusc.2018.01.087 ↗
10. G. Greczynski, L. Hultman, Compromising science by ignorant instrument calibration - need to revisit half a century of published XPS data, Angew. Chem. Int. Ed., 10.1002/anie.201916000.
11. Calibration of electron spectra10.1016/0368-2048(73)80022-2 ↗
12. Energies of neutral sputtered particles10.1016/0031-9163(66)90273-3 ↗
13. Secondary neutral mass spectrometry – a powerful technique for quantitative elemental and depth profiling analyses of nanostructures
14. Crank · 1975 · 21
15. Grain boundary diffusion: fundamentals to recent developments10.1179/imr.1997.42.4.155 ↗
16. Herzig · 2005 · 350
17. Paul · 2014 · 446
18. Effect of residual gas on structural, electrical and mechanical properties of niobium films deposited by magnetron sputtering deposition
19. One and a half century of diffusion: Fick, Einstein, before and beyond10.62721/diffusion-fundamentals.4.39 ↗
20. Grain boundary width, energy and self-diffusion in nickel: effect of material purity10.1016/j.actamat.2013.05.010 ↗
21. Thermodynamic and kinetic study of solid state reactions in the Cu–Si system10.1063/1.371357 ↗
22. Phase growth in an amorphous Si–Cu system, as shown by a combination of SNMS, XPS, XRD and APT techniques10.1016/j.actamat.2013.08.021 ↗