A study on the possibility to process dense 60NiTi from elementally blended Ni and Ti powders
Source abstract
Abstract
Abstract This research aimed to process 60NiTi with a dense and homogeneous microstructure from a Ni–Ti powder mixture. It was noted that the optimum route, amongst the ones studied in this research, for obtaining parts having a homogeneous microstructure and the highest amount of relative density is as follows: The powder mixture being initially CIPed was sintered at 750 °C for a holding time of 8 h. To homogenize the microstructure and to obtain the required phases, a secondary sintering treatment was applied on samples cut from elementary sintered parts. After conducting this treatment at 1050 °C for 4 h, the formation of a homogeneous microstructure containing mainly NiTi, Ni3Ti and Ni3Ti2 phases was observed in the samples. However, the microstructures of these treated samples consisted of ∼34% porosity. Applying HIP treatments, under 180 MPa and for a holding time of 1 h, at different temperatures above the melting start temperature of the samples, treated by the secondary sintering procedure, successfully increased the density of parts. 1181 °C was the maximum temperature at which the parts could be treated without losing their dimensional integrity and parts with the highest relative density of ∼92% were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Hardening behavior and phase decomposition in very Ni-rich Nitinol alloys10.1016/j.msea.2015.04.079 ↗
2. Nitinol 60 as a material for spacecraft triboelements
3. Effects of open atmosphere solutionizing treatment on the microstructural and mechanical properties of porous 60NiTi parts10.4028/www.scientific.net/KEM.770.87 ↗
4. An investigation on microstructural and mechanical properties of porous 60NiTi parts solutionized by different cost-effective methods10.1007/s13632-018-0443-4 ↗
5. Superelasticity in a new BioImplant material: Ni-rich 55NiTi alloy10.1007/s11340-006-9004-x ↗
6. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
7. Thomas · 2015
8. Deformation characteristics of the intermetallic alloy 60NiTi10.1016/j.intermet.2016.11.003 ↗
9. Rolling contact fatigue of superelastic intermetallic materials (SIM) for use as resilient corrosion resistant bearings10.1007/s11249-014-0456-3 ↗
10. Powder sintering and shape-memory behaviour of NiTi compacts synthesized from Ni and TiH 210.1016/S0921-5093(04)00837-8 ↗
11. Adharapurapu · 2007
12. C. Wojcik, Methods of Processing Nickel-Titanium Alloys, US Patent #7192496, (2007).
13. 60NiTi alloy for tribological and biomedical surface engineering applications10.1007/s11837-013-0610-7 ↗
14. Nickel-titanium alloys: corrosion" proof" alloys for space bearing, components and mechanism applications
15. Compaction and sintering phenomena in titanium—nickel shape memory alloys10.1179/pom.1985.28.3.131 ↗
16. Chen · 2014
17. Stanford · 2012
18. Novel super-elastic materials for advanced bearing applications10.4028/www.scientific.net/AST.89.1 ↗
19. Della Corte · 2014
20. Julien · 2002 · #6422010
21. Resilient and corrosion-proof rolling element bearings made from superelastic Ni-Ti alloys for aerospace mechanism applications
22. DellaCorte · 2012
23. Comparison of the reciprocating sliding wear of 58Ni39Ti-3Hf alloy and baseline 60NiTi10.1016/j.wear.2018.05.011 ↗
24. Reciprocating sliding wear behavior of 60NiTi as compared to 440C steel under lubricated and unlubricated conditions10.1080/10402004.2018.1460434 ↗
25. An investigation on reasons causing inferiority in unlubricated sliding wear performance of 60NiTi as compared to 440C steel10.1080/10402004.2018.1516326 ↗
26. Stanford · 2012
27. Julien · 2005 · #6886986
28. Julien · 2002 · #6454016
29. Julien · 2001 · #6267402
30. Stanford · 2015
31. Della Corte · 2012 · #8182741
32. Della Corte · 2017
33. Synthesis of as-sintered 60NiTi parts with a high open porosity level10.1590/1980-5373-mr-2018-0088 ↗
34. Mechanical and microstructural characteristics of as-sintered and solutionized porous 60NiTi10.1016/j.intermet.2018.06.001 ↗
35. An investigation into the possibility to eliminate the microstructural defects of parts printed using a Ni-rich Ni-Ti elemental powder mixture10.1088/2053-1591/abbc3f ↗
36. Processing of TiNi from elemental powders by hot isostatic pressing10.1016/S0921-5093(99)00550-X ↗
37. A. Cooke, J. Slotwinski, (2012).
38. Stanford · 2016
39. DellaCorte · 2012
40. 2008
41. In situ observation and neutron diffraction of NiTi powder sintering10.1016/j.actamat.2013.12.013 ↗
42. Conditions for SHS of intermetallic compounds with selective laser sintering of powdered compositions10.1007/BF02674431 ↗
43. Formation of intermetallic phases under laser sintering of powdered
44. Powder metallurgical processing of Ni–Ti shape memory alloy10.1179/pom.1997.40.1.43 ↗
45. Alternative powder metallurgical processing of Ti-rich NiTi shape-memory alloys10.1016/j.scriptamat.2004.11.002 ↗
46. In situ observation of phase transformation of powder sintering from Ni/TiH2 using neutron diffraction10.1002/9781118889879.ch114 ↗
47. Enhanced powder sintering of near-equiatomic NiTi shape-memory alloys using Ca reductant vapor10.1016/j.jallcom.2004.06.079 ↗