journal article·2021-10

Research on the influence of tool geometric parameters on the LSEM mechanism of 7A04 aluminum alloy

Wang Penghao, Yue Xiujie, Zong Chengguo, Zhang Ping, Zhang Qiang, Zhai Yanchun, Yu Xiao

Vacuum· Volume 192
Publisher page

Abstract

Abstract In order to explore the influence of tool geometric parameters on the large-strain extrusion machining (LSEM) mechanism of 7A04 aluminum alloy, based on the Abaqus finite element (FE) analysis software, the LSEM process of 7A04 aluminum alloy is simulated, with focus on how equivalent stress, equivalent strain, cutting temperature and cutting force change with tool geometric parameters. The results show that as cutting tool rake angle increases, equivalent stress first decreases then increases; equivalent strain first increases then decreases and then increases again; cutting temperature first decreases then increases; cutting force first decreases then increases. As constraining tool corner radius increases, equivalent stress first increases then decreases; equivalent strain, cutting temperature and cutting force are all positively correlated with constraining tool corner radius. Adding micro-textures can effectively increase the equivalent strain generated by LSEM and reduce the cutting force generated by LSEM. If a smaller cutting force were considered an indicator of a better tool geometric parameter, then α = 15°, R = 0, and adding rectangular-sectioned strip texture only on the constraining tool should be the best option.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Deformation field in large-strain extrusion machining and implications for deformation processing[J]10.1016/j.scriptamat.2011.10.045 ↗
2. Mert · 2012
3. Characterization of the deformation field in large-strain extrusion machining[J]10.1016/j.jmatprotec.2014.08.022 ↗
4. A parametric study on extrusion geometry and blade quantity during axial cutting deformation of circular aa6061-t6 extrusions under impact and quasi-static loading10.1016/j.ijimpeng.2012.03.008 ↗
5. Mechanical analysis of warm extrusion precision forming on 42crmo steel cutting pick10.4028/www.scientific.net/AMR.538-541.1061 ↗
6. The effects of tool structure parameters on forming extrusion cutting (fec)10.1007/s00170-018-2423-x ↗
7. Simulation analysis of a new chips recycling process termed forming extrusion cutting10.2507/IJSIMM16(4)CO16 ↗
8. Effectiveness evaluation of dried vermicelli extrusion-cutting machine using overall equipment effectiveness indicator
9. High-moisture extrusion with insect and soy protein concentrates: cutting properties of meat analogues under insect content and barrel temperature variations10.3920/JIFF2017.0066 ↗
10. Recycling of 6061 aluminum alloy cutting chips using hot extrusion and hot rolling10.4028/www.scientific.net/MSF.544-545.443 ↗
11. Direct single-stage processing of lightweight alloys into sheet by hybrid cutting–extrusion10.1115/1.4031022 ↗
12. Direct single-stage processing of lightweight alloys into sheet by hybrid cutting-extrusion
13. Jiayang, Zhang, Xueqin, Pang, Haitao, & Chen, et al. Process and forming performance of ploughing extrusion cutting for recycling of metal chips - sciencedirect. J. Mater. Process. Technol., 274, 116283-116283.10.1016/j.jmatprotec.2019.116283 ↗
14. Analytical approach for optimization of chamfered cutting tool preparation considering built-up edge extrusion behavior10.20965/ijat.2013.p0329 ↗
15. High-moisture extrusion with insect and soy protein concentrates: cutting properties of meat analogues under insect content and barrel temperature variations10.3920/JIFF2017.0066 ↗
16. The mechanical behaviors and energy absorption mechanisms of Al–Cu–Mn alloy under dynamic penetration at wide temperature ranges and large angles
17. The technology of continuous fibre-reinforced polymers: a review on extrusion additive manufacturing methods10.1007/s00170-021-06837-6 ↗
18. Effect of cutting and vibration parameters on the cutting performance of 7075-T651 aluminum alloy by ultrasonic vibration10.1007/s00170-020-05098-z ↗
19. A study on the dynamic shock performance of 7055-T6I4 aluminum alloy based on experimental and simulation10.1016/j.vacuum.2018.08.042 ↗
20. Modification of mechanical properties of aluminum alloy rods via friction-extrusion method10.3390/ma13225224 ↗
21. Microstructure and wear resistance of mg2si–al composites fabricated using semi-solid extrusion
22. Analysis of the microhardness, mechanical properties and electrical conductivity of 7055 aluminum alloy10.1016/j.vacuum.2019.109005 ↗
23. Simulation and experiment study of burrs in micro-milling zr-based metallic glass10.1007/s12206-020-0634-1 ↗
24. In situ analysis of deformation mechanics of constrained cutting toward enhanced material removal