journal article·2019-07

Fabrication of large-scale uniform submicron inverted pyramid pit arrays on silicon substrates by laser interference lithography

Ran Xu, Zhen Deng, Yin Yue, Sen Wang, Xinxin Li, Ziguang Ma, Yang Jiang, Lu Wang, Chunhua Du, Haiqiang Jia, Wenxin Wang, Hong Chen

Vacuum· Volume 165
Publisher page

Abstract

Abstract We propose a new method for fabricating large-scale uniform high-quality submicron inverted pyramid pit arrays by laser interference lithography (LIL), combined with dry etching and wet etching. In this process, uniform photoresist dot arrays are fabricated by LIL for 2-inch wafer. Dry etching is used to ensure the formation of the fluorocarbon organic polymer (FOP) mask layer. Wet etching parameters are investigated in details and inverted pyramid pits with {111} sidewalls are formed by anisotropic wet etching. Using this method, we have successfully produced uniform high-quality inverted pyramid pit arrays with the average size of 240 nm and the period of 450 nm. The size of pits can be tailored between 200 nm and 400 nm and the size deviation of inverted pyramid pits is 6.7% over the whole 2-inch wafer. This method offers a simple, less time consuming and cost-effective process of micro-nano pattern fabrication. Besides, GeSi QDs are quantitatively investigated by a nucleation model which shows GeSi QDs are preferentially grown at the tip of inverted pyramid pit and four intersection lines of two {111} planes inside the pit.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photonic and Optical Devices · Nanofabrication and Lithography Techniques · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Facile synthesis, structural, electrical and dielectric properties of CdSe/CdS core-shell quantum dots10.1016/j.vacuum.2018.08.050 ↗
2. Effects of different modified underlayer surfaces on growth and optical properties of InGaN quantum dots10.1016/j.vacuum.2004.11.003 ↗
3. Fabrication and carrier transport properties of Si quantum dots/SiO2 multilayer films on Si substrate10.1016/j.vacuum.2013.09.016 ↗
4. Preparation of regularly ordered Ge quantum dot lattices in amorphous matrices10.1016/j.vacuum.2011.07.032 ↗
5. Bright, multicoloured light-emitting diodes based on quantum dots10.1038/nphoton.2007.226 ↗
6. Quantum dot solar cells10.1016/S1386-9477(02)00374-0 ↗
7. Semiconductor quantum dots and quantum dot arrays and applications of multiple exciton generation to third-generation photovoltaic solar cells10.1021/cr900289f ↗
8. Silicon nanostructures for photonics and photovoltaics10.1038/nnano.2013.271 ↗
9. ZnS shell-like CdS quantum dot-sensitized solar cell grown by SILAR approach; effect of electrolyte, counter electrode, and shell thickness10.1016/j.vacuum.2017.02.007 ↗
10. High-detectivity, normal-incidence, mid-infrared (λ∼ 4 μm) InAs/GaAs quantum-dot detector operating at 150 K10.1063/1.1385584 ↗
11. Normal-incidence, high-temperature, mid-infrared, InAs-GaAs vertical quantum-dot infrared photodetector10.1109/3.958360 ↗
12. A single-photon detector in the far-infrared range10.1038/35000166 ↗
13. Detection of single photons using a field-effect transistor gated by a layer of quantum dots10.1063/1.126745 ↗
14. Electrically pumped continuous-wave III–V quantum dot lasers on silicon10.1038/nphoton.2016.21 ↗
15. Strain relief and shape oscillations in site-controlled coherent SiGe islands10.1088/0957-4484/24/33/335707 ↗
16. InAs QDs on (111)-faceted Si (001) hollow substrates with strong emission at 1300 nm and 1550 nm
17. Dry etching of deep air holes in GaAs/AlGaAs-based epi-wafer having InAs quantum dots for fabrication of photonic crystal laser10.7567/JJAP.56.126501 ↗
18. Recipes for the fabrication of strictly ordered Ge islands on pit-patterned Si (001) substrates10.1088/0957-4484/24/10/105601 ↗
19. Optimal growth of Ge-rich dots on Si (001) substrates with hexagonal packed pit patterns
20. Fabrication of 2D, 1D and 0D ordered metallic nanostructures10.1016/S0042-207X(02)00286-5 ↗
21. Tunable periodic graphene antidot lattices fabricated by e-beam lithography and oxygen ion etching10.1016/j.vacuum.2014.01.015 ↗
22. Fabrication of 4-inch nano patterned wafer with high uniformity by laser interference lithography10.1088/0256-307X/35/5/054207 ↗
23. Microlens array fabrication by laser interference lithography for super-resolution surface nanopatterning10.1063/1.2374809 ↗
24. 一种简单高效的制备硅纳米孔阵结构的方法
25. Two-layer microstructures fabricated by one-step anisotropic wet etching of Si in KOH solution10.3390/mi7020019 ↗
26. Nanometer-thin pure Boron layers as mask for silicon micromachining10.1109/JMEMS.2017.2764322 ↗
27. Fabrication of single-crystal silicon nanowires based on surface wet adhesion10.1016/j.matlet.2015.03.108 ↗
28. Patterned microstructures formed with MeV Au implantation in Si (1 0 0)10.1016/j.nimb.2006.04.085 ↗
29. Nanowall formation by maskless wet-etching on a femtosecond laser irradiated silicon surface10.1016/j.apsusc.2017.12.155 ↗
30. Anisotropic etching of crystalline silicon in alkaline solutions I. Orientation dependence and behavior of passivation layers10.1149/1.2086277 ↗
31. Scalloping removal on DRIE via using low concentrated alkaline solutions at low temperature10.1016/j.sna.2011.05.028 ↗
32. Anisotropic etching of {100} and {110} planes in (100) silicon10.1088/0960-1317/11/3/309 ↗
33. The influence of atomic configuration of (hkl) planes on adsorption processes associated with anisotropic etching of silicon10.1016/S0924-4247(01)00690-2 ↗
34. Plasma etch effects on low‐temperature selective epitaxial growth of silicon10.1063/1.350968 ↗
35. Local strain-mediated chemical potential control of quantum dot self-organization in heteroepitaxy10.1103/PhysRevLett.92.025502 ↗
36. Thermally induced morphology evolution of pit-patterned Si substrate and its effect on nucleation properties of Ge dots
37. Surface energy of germanium and silicon10.1149/1.2425806 ↗
38. American institute of physics handbook: section
39. Measurements of linear sizes of relief elements in the nanometer range using an atomic force microscope