journal article·2023-08

Development of an Al rich Ti–Al alloy with better ductility

Erdem Mermer, Hanifi Çinici, Gökay Uğur, Rahmi Ünal

Vacuum· Volume 214
Publisher page

Abstract

In this work, structural and mechanical properties of Ti-56Al-4Zr-2Nb (wt.%) alloy have been investigated by first-principles calculations based on density functional theory and experimentally. Theoretical studies have been performed with the crystal structures created with the Virtual crystal approximation approach. Ti-56Al-4Zr-2Nb (wt.%) alloy have been synthesized first time by vacuum induction melting. The phases in the microstructure were examined by scanning electron microscopy and X-Ray diffraction. Simulated alloy is found as mechanically stable by first-principles calculations. Elastic modulus and hardness results of theoretical and experimental studies are in good agreement with each other, and acceptable difference shows the reliability and success of the theoretical results in this study. Ti-56Al-4Zr-2Nb (wt.%) alloy is suggested as a promising new Ti-Al alloy for industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Application of molecular interaction volume model in separation of Ti-Al alloys in vacuum distillation
2. Metastable phase and microstructural degradation of a TiAl alloy produced via selective electron beam melting
3. The effect of impurities on stacking fault energy and dislocation properties in γ -TiAl
4. Development of gamma titanium aluminide (γ-TiAl) alloys: a review10.1016/j.jallcom.2022.167262 ↗
5. Additive manufacturing of gamma titanium aluminide alloys : a review10.1007/s10853-022-06896-4 ↗
6. Electronic effect on the ductility of alloyed TiAl compound10.1016/0956-7151(90)90131-Y ↗
7. Microstructures and properties of a hot-extruded TiAl containing no Cr10.1016/S0921-5093(01)01615-X ↗
8. A first principles study of the influence of alloying elements on TiAl: site preference10.1016/S0966-9795(99)00164-8 ↗
9. First principles study of influence of alloying elements on TiAl: cleavage strength and deformability10.1016/S0927-0256(01)00212-9 ↗
10. Microstructure, texture and tensile properties of Ti-47Al-2Cr-2Nb alloy produced by selective electron beam melting10.1016/j.jallcom.2018.07.025 ↗
11. Effect of alloying elements on the behaviour of TiAl-based alloys10.1016/j.intermet.2014.06.007 ↗
12. First-principles study of site occupancy of dilute 3d, 4d and 5d transition metal solutes in L10 TiAl10.1016/j.actamat.2008.08.047 ↗
13. Influence of Mo content on microstructure and mechanical properties of β-containing TiAl alloy10.1016/S1003-6326(17)60094-3 ↗
14. A first principles calculation of site occupancy of the B2 phase in Ti2AlX (X=V, Cr, Fe, Mo, Ta, Nb, Zr, Hf and Re) intermetallics10.1016/j.cjph.2019.05.020 ↗
15. Effect of Zr, Hf, and Sn additives on elastic properties of α2-Ti3Al phase by first-principles calculations10.1007/s11595-017-1694-7 ↗
16. Effect of Zr on microstructure and mechanical properties of binary TiAl alloys10.1016/S1003-6326(18)64816-2 ↗
17. Intermetallics Microstructural stability and creep properties of middle Nb γ -TiAl alloy with a modulated microstructure
18. Microstructure and mechanical properties of a high Nb-TiAl alloy fabricated by electron beam melting10.1016/j.matdes.2018.09.044 ↗
19. Microstructure and mechanical properties control of c -TiAl (Nb , Cr , Zr) intermetallic alloy by induction float zone processing10.1016/j.jallcom.2014.12.210 ↗
20. Structural, elastic and mechanical properties of Hf-doped TiAl2 and α-TiAl3 intermetallic compounds: first-principle calculations10.1140/epjb/s10051-022-00347-4 ↗
21. Formation and crystal chemistry of cubic ternary phases with filled Th 6Mn23-type and AuCu3-type in the systems Ti-MVIII-Al10.1016/j.intermet.2004.02.002 ↗
22. Electronic structure, mechanical and optical properties of TiAl3 (L12 & D022) via first-principles calculations10.1016/j.cjph.2016.03.006 ↗
23. Ab initio calculation of the formation energies of L12, D022, D023 and one dimensional long period structures in TiAl3 compound10.1016/S0966-9795(02)00054-7 ↗
24. Production and characterization of niobium toughened Ti-TiAl3 metallic-intermetallic composite10.12693/APhysPolA.132.941 ↗
25. FP-LAPW investigation of Al3 (Sc1-x Tix) alloys properties in L 12 and D022 structures10.1142/S0217979218501679 ↗
26. Boulechfar · 2013
27. Kosova · The preparation of the Ti-Al alloys based on intermetallic phases · 2016 · 1
28. An ab initio study on phase stability, elastic and mechanical properties of Zr-doped TiAl2 and α-TiAl3 intermetallics10.1209/0295-5075/ac9dbb ↗
29. First principles methods using CASTEP
30. “Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
31. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
32. A technique for relativistic spin-polarised calculations10.1088/0022-3719/10/16/019 ↗
33. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
34. Applicability of a quantum mechanical ‘virtual crystal approximation’ to study A1/Si-disorder10.1016/S0009-2614(02)01029-1 ↗
35. Influence of Nb concentration on the structure, stability, and electronic and mechanical properties of D022 Al3Ti by first-principles calculations and experiments10.1016/j.jpcs.2019.01.035 ↗
36. Phases and phase equilibria in the Al-rich part of the Al-Ti system above 900 °C10.1016/S0966-9795(02)00022-5 ↗
37. Phase equilibria investigations on the aluminum-rich part of the binary system Ti-Al10.1007/s11661-001-0114-x ↗
38. A review on crucibles for induction melting of titanium alloys10.1016/j.matdes.2019.108295 ↗
39. Effect of hydrogen on interfacial reaction between TiAl alloy melt and graphite mold10.1016/j.intermet.2014.04.007 ↗
40. S. Acceptance and V. Examination, “Standard Specification for Titanium and Titanium Alloy Castings 1,” vol. 9, doi: 10.1520/B0367-22.2.
41. Aerospace Material Specification : SAE AMS4928W : Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed. (2017). Warrendale, PA :SAE International.
42. Aerospace Material Specification : SAE AMS4901U : Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi
43. Dynamical theory of crystal lattices10.1119/1.1934059 ↗
44. Silverston · 1952 · vol. 2
45. First principles study of elastic and mechanical properties of TlBr and TlCl compounds
46. Investigation of the mechanical, electronic and phonon properties of X2ScAl (X = Ir, Os, and Pt) Heusler compounds10.3938/jkps.76.916 ↗
47. Microscopic theory of hardness and design of novel superhard crystals10.1016/j.ijrmhm.2012.02.021 ↗
48. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
49. Investigation of the mechanical, electronic and phonon properties of X2ScAl (X = Ir, Os, and Pt) Heusler compounds10.3938/jkps.76.916 ↗
50. Experimental and first-principles investigation of crystal structure of powder metallurgy Al–1.1Sc and Al–2Sc alloys10.1016/S1003-6326(13)62855-1 ↗
51. Poisson's ratio and modern materials10.1038/nmat3134 ↗
52. Elastic properties of the O phase in Ti-Al-Nb alloys10.1016/S0966-9795(96)00075-1 ↗
53. Cubic perovskite Pb(Mg1/3Nb2/3)O3: a damage tolerant, machinable, and thermal barrier coating material
54. An ab-initio study on structural, elastic, electronic, bonding, thermal, and optical properties of topological Weyl semimetal TaX (X = P, As)10.1038/s41598-021-85074-z ↗
55. Fischer-Cripps · 2004 · 69
56. Calphad : computer coupling of phase diagrams and thermochemistry first-principles calculations of binary Al compounds : enthalpies of formation and elastic properties10.1016/j.calphad.2011.09.009 ↗
57. Electronic structure, mechanical and optical properties of TiAl 3 (L1 2 & D0 22) via first-principles calculations10.1016/j.cjph.2016.03.006 ↗
58. Investigation on electronic structures and mechanical properties of Nb–doped TiAl2 intermetallic compound10.1016/j.jallcom.2018.11.362 ↗
59. Theoretical investigation of ductilizing effects of alloying elements on TiAl10.1016/S0966-9795(97)00060-5 ↗
60. Phase stability, mechanical properties and electronic structures of Ti–Al binary compounds by first principles calculations10.1016/j.matchemphys.2018.09.055 ↗
61. TiAl3–Al porous by reactive synthesis with space holder method10.1016/j.jmrt.2021.10.130 ↗
62. Effect of Nb, Zr and Zr + Hf on the microstructure and mechanical properties of β-solidifying γ-TiAl alloys10.1016/j.msea.2021.141388 ↗