Hybrid perfluorocarbon/carboxylic acid thin films via plasma deposition of hexafluoropropene and acrylic acid mixtures
Source abstract
Abstract
Abstract Polymeric films containing hydrophilic and hydrophobic functionalities are of interest for several applications, from biomaterials to fuel cells. In this study, we report on the plasma copolymerization of hexafluoropropene - acrylic acid mixtures. By finely tuning the monomers’ ratio and the plasma power, it is possible to adjust the relative amount of the hydrophilic and hydrophobic functionalities in the deposited films. Correspondingly, the wetting behavior can be tuned from fully hydrophilic to hydrophobic. Finally, depending on the process parameters, film proton conductivities in the range 20–70 mS cm−1 are obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Nanostructured ultra-low-k porous fluoropolymer composite films via plasma co-polymerization of hydrophobic and hydrophilic monomers and subsequent hydrolysis treatment10.1016/j.eurpolymj.2007.06.018 ↗
2. Plasma copolymerization of fluorinated and acrylate monomers: kinetics and chemical structure study10.1002/ppap.201400128 ↗
3. Tunable surface chemistry and wettability of octafluorocyclobutane and acrylic acid copolymer combined LDPE substrate by pulsed plasma polymerization10.1007/s11998-019-00244-z ↗
4. Duty cycle dependent chemical structure and wettability of RF pulsed plasma copolymers of acrylic acid and octafluorocyclobutane10.1016/j.apsusc.2017.11.261 ↗
5. Membrane transport of organics. I. Sorption and permeation of carboxylic acids in perfluorosulfonic and perfluorocarboxylic polymer membranes10.1002/(SICI)1097-4628(19970118)63:3<355::AID-APP11>3.0.CO;2-# ↗
6. A review of polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2007.03.044 ↗
7. Morphology and properties of perfluorosulfonic acid polymer/perfluorocarboxylic acid polymer blend membranes10.1002/pen.23879 ↗
8. Stimuli-responsive monolayers for biotechnology10.1016/j.progpolymsci.2009.11.001 ↗
9. Recent advances and challenges in designing stimuli-responsive polymers10.1016/j.progpolymsci.2009.10.002 ↗
10. Biocompatibility and anti-cracking performance of perfluorocarboxylic acid ionomer membranes for implantable biosensors10.1007/s10853-012-6397-z ↗
11. Fabrication of V-shaped brushes consisting of two highly incompatible arms of PEG and fluorinated PMMA and their protein-resistance performance10.1002/pola.28138 ↗
12. Solid polymer fuel cell synthesis by low pressure plasmas: a short review10.1051/epjap:2006035 ↗
13. Plasma techniques for the fabrication of polymer electrolyte membranes for fuel cells10.1016/j.memsci.2014.01.004 ↗
14. Novel hybrid fluoro-carboxylated copolymers deposited by initiated chemical vapor deposition as protonic membranes10.1016/j.polymer.2012.11.004 ↗
15. Layered nanostructures in proton conductive polymers obtained by initiated chemical vapor deposition10.1021/acs.macromol.5b01145 ↗
16. Plasma-polymerized membranes with high proton conductivity for a micro semi-passive direct methanol fuel cell10.1002/ppap.201500113 ↗
17. Synthesis of membrane-electrode assembly for fuel cells by means of (sub)-atmospheric plasma processes10.1002/ppap.201100208 ↗
18. Fluorinated carboxylic membranes deposited by plasma enhanced chemical vapour deposition for fuel cell applications10.1016/j.jpowsour.2010.03.019 ↗
19. Emerging membranes for electrochemical systems: Part II. High temperature composite membranes for polymer electrolyte fuel cell (PEFC) applications10.1016/j.jpowsour.2003.09.043 ↗
20. Solid polymer electrolyte membranes for fuel cell applications—a review10.1016/j.memsci.2005.01.035 ↗
21. Electrochemical properties of PP membranes with plasma polymer coatings of acrylic acid10.1016/j.memsci.2005.03.023 ↗
22. Miniaturized fuel cells based on microsystem technologies10.1016/S1464-2859(01)80641-6 ↗
23. Effect of elaboration parameters on ionic conductivity for PECVD fuel cell electrolyte10.1007/s11581-007-0168-x ↗
24. On the complexity of proton conduction phenomena10.1016/S0167-2738(00)00301-5 ↗
25. The relationship between proton conductivity and water permeability in composite carboxylate/sulfonate perfluorinated ionomer membranes10.1016/j.jpowsour.2006.12.014 ↗
26. Thermal studies on proton conductive copolymer thin films based on perfluoroacrylates synthesized by initiated Chemical Vapor Deposition10.1016/j.tsf.2017.01.023 ↗
27. Carboxylated and sulfonated poly(arylene-co-arylene sulfone)s: thermostable polyelectrolytes for fuel cell applications10.1021/ma012198t ↗
28. Study of macroporous silicon electrochemical etching in 3D structured N type silicon substrates
29. Preparation of ultra-thin cation exchange composite membranes by a novel plasma polymerization technique10.1142/S0218625X07010755 ↗
30. Synthesis of proton-exchange membranes by a plasma polymerization technique10.1143/JJAP.47.6891 ↗
31. Preparation and characteristics of acrylic acid/styrene composite plasma polymerized membranes10.1016/j.apsusc.2010.04.037 ↗
32. Single step solventless deposition of highly proton-conducting anhydride layers10.1039/c2jm30349c ↗
33. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
34. Compromising science by ignorant instrument calibration—need to revisit half a century of published XPS data10.1002/anie.201916000 ↗
35. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
36. Deposition of water-stable coatings containing carboxylic acid groups by atmospheric pressure cold plasma jet10.1002/ppap.201500005 ↗
37. Plasma polymerization of acrylic acid for the tunable synthesis of glassy and carboxylated nanoparticles10.1021/acs.jpcb.9b08960 ↗
38. Fluorocarbon coatings via plasma enhanced chemical vapor deposition of 1H,1H,2H,2H-perfluorodecyl acrylate-1, spectroscopic characterization by FT-IR and XPS10.1002/ppap.201000043 ↗
39. Deposition of super-hydrophobic fluorocarbon coatings in modulated RF glow discharges10.1016/S0257-8972(03)00123-3 ↗
40. Plasma polymerization of fluorocarbons
41. Infrared, Raman, and near-infrared spectroscopic evidence for the coexistence of various hydrogen-bond forms in poly(acrylic acid)10.1021/ma960693x ↗
42. Beamson · 1992
43. Nanophase‐separated poly(acrylic acid)/poly(ethylene oxide) plasma polymers for the spatially localized attachment of biomolecules10.1002/ppap.201900220 ↗
44. Briggs · 1998 · 62
45. Silicon surfaces treated by CF4, CF4/H2, and CF4/O2 rf plasmas: study by in situ Fourier transform infrared ellipsometry10.1116/1.580514 ↗