Hollow morphology, crystallization and phase transformation behavior of magnetic hollow composite materials based lignocellulose fibers via heat treatment
Source abstract
Abstract
Abstract The hollow composite materials with unique topological structure and ideal appearance morphology were conducted via high-heat process to investigate the relationship of magnetic hollow materials between structure and performance. The hollow composite materials were characterized via scanning electron microscope (SEM), Thermo-gravimetric analyses (TGA), X-ray diffraction (XRD), vibration sample magnetic flowmeter (VSM) and X-ray photoelectron spectroscopy (XPS). The results revealed that there were no distinct effect on both the size of hollow cavity and the property of hollow structure via heat treatment. The weight loss occurred between 290 °C and 450 °C, indicating that lignocellulose fibers (LCFs) of metallization lignocellulose fibers (MLCFs) was 4.54%, 5.60%, respectively. The characteristic diffraction peaks corresponding to Ni3P had appeared. In addition, there was the crystallite size between 4.7 nm and 26.8 nm for Ni deposited on LCFs by the measurement of XRD, further indicating that particle size could be fined via high-heat treatment. The crystalline properties of the hollow composite materials via high-heat treatment at 400 °C were optimum. The mechanism of high-temperature heat treatment for Ni crystal grains growth was analyzed. Here, the magnetic parameters of saturation magnetization (Ms), coercive (HC) and remanence (Mr) were good. The coatings surface can absorb some Ni2+ ions and oxygen and the metal Ni can be oxidized NiO via heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Supercapacitor Materials and Fabrication · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Structural changes induced by heating in electroless nickel-phosphorus alloys, Structural changes induced by heating in electroless nickel-phosphorus alloys Structural changes induced by heating in electroless nickel-phosphorus alloys10.1016/0040-6090(88)90384-7 ↗
2. DTA and X-ray studies of electroless nickel10.1149/1.2426623 ↗
3. Evidence of nickel phosphide Ni2P in as-plated electroless nickel10.1149/1.2411281 ↗
4. Effect of phosphorus content on the relative proportions of crystalline and amorphous phases in electroless Ni-P deposits10.1007/BF00271230 ↗
5. Investigation into the structure of electrodeposited nickel-phosphorus alloy deposits10.1016/0257-8972(94)02402-2 ↗
6. Role of phosphorus in the electrochemical behavior of electroless Ni-P alloys in 3.5 wt10.1016/S0257-8972(05)80023-4 ↗
7. Influence of the heat treatment on the corrosion resistance of electroless Ni-Pin 5% NaCl solution
8. Wear performance and mechanism of electroless Ni-P coating10.1016/S0257-8972(96)03086-1 ↗
9. The annealing behaviour of electroless noncrystalline nickel phosphorus films10.1016/0040-6090(89)90705-0 ↗
10. Studies on crystallization of electroless Ni-P deposits10.1016/0924-0136(96)85110-7 ↗
11. Peak-profile analysis of electroless nickel coatings10.1016/S0925-8388(00)01099-9 ↗
12. A transmission electron microscopy study on the crystallization of amorphous Ni-P electroless deposited coatings10.1016/0040-6090(88)90388-4 ↗
13. Effect of annealing on magnetic properties and microstructure of electroless nickel-copper-phosphorus alloy deposits10.1007/BF00549164 ↗
14. A transmission electron microscopy study on the crystallization of amorphous Ni-P electroless deposited coatings10.1016/0040-6090(88)90388-4 ↗
15. Crystallisation and phase transformation behavior of electroless nickel phosphorus plations during continuous heating10.1016/S0925-8388(03)00069-0 ↗
16. Crystallisation kinetics and Phase transformation behavior of electroless niekel-Phosphorus deposits with high Phosphorus content10.1016/S0925-8388(01)01798-4 ↗
17. Effect of substrate temperatures on the properties of PLD Mo-V-Ag-O nanocomposite thin films10.1016/j.vacuum.2019.06.037 ↗
18. Effect of thermal history on the microhardness of electroless Ni-P10.1016/S0040-6090(99)00671-9 ↗
19. The effect of high-heat treatment on the bonding strength of electroless coatings
20. The effect of high-heat treatment on electroless Ni-P coatings
21. The influence of the composition of electroless Ni-P coatings and the treatment temperature on the coatings performance
22. Influence of heat treatment on the abrasive wear resistance of electroless Ni-P10.1016/S0257-8972(97)00463-5 ↗
23. Preparation, formation mechanism and performance of magnetic hollow coatings based on micro/nano lignocellulose fibers10.1016/j.surfcoat.2016.05.074 ↗
24. Hu · 2003
25. Photocatalytic evolution of hydrogen over mesoporous TiO2 supported NiO photocatalyst prepared by single-step sol-gel process with surfactant template10.1016/j.ijhydene.2004.09.007 ↗
26. Li · 2003
27. Preparation and electrochemical properties of Ni(OH)2-carbon nanotube-reduced graphene oxide composites
28. Effect of temperature on electroless deposition of Ni-Cu-P ternary alloy on birch veneer
29. Ni@NiO core-shell nanoparticle tube arrays with enhanced supercapacitor performance10.1039/C4TA06921H ↗
30. XPS analysis of nickel layers on carbon fibers
31. Moulder · 1992
32. Activity for hydrogen evolution reaction on electrodeposited Ni-Ce-P alloy
33. Non-aqueous approach to the preparation of reduced graphene oxide/a-Ni(OH)2 hybrid composites and their high capacitance behavior10.1039/c1cc11566a ↗
34. Interpretation of Ni2p XPS spectra of Ni conductors and Ni insulators10.1007/s002690050265 ↗
35. The effect of processing gas on corrosion performance of electroless Ni–W–P coatings treated by laser10.1016/j.surfcoat.2012.01.039 ↗
36. Magnetically separable and recyclable urchin-like Co–P hollow nanocomposites for catalytic hydrogen generation10.1016/j.jpowsour.2014.02.067 ↗
37. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
38. G. Greczynski, L. Hultman. Compromising science by ignorant instrument calibration - need to revisit half a century of published XPS data, Angew. Chem.. DOI:10.1002/ange.201916000.10.1002/ange.201916000 ↗
39. Oxygen doping to optimize atomic hydrogen binding energy on NiCoP for highly effcient hydrogen evolution
40. A.J. Mathews, S. Ranjan, A. Inbaoli, C.S. Sujith Kumar, S. Jayaraj. Optimization of the sintering parameters of a biporous copper-nickel composite wick for loop heat pipes, Mater. Today: Proceedings. DOI: 10.1016/j.matpr.2020.02.171.10.1016/j.matpr.2020.02.171 ↗
41. Effect of heat treatment on microstructure and corrosion resistance of electrodeposited nanocrystalline chromium coating
42. Grain size effect on microstructure evolution and properties of 304 Austenitic stainless steel
43. Crystallization micro-mechanism of near-eutectic amorphous Ni-P10.1016/j.actamat.2015.11.005 ↗
44. Chen · 2019 · 50
45. Crystallisation kinetics and phase transformation behaviour of electroless nickel-phosphorus deposits with high phosphorus content10.1016/S0925-8388(01)01798-4 ↗
46. Effect of heat treatment on properties of electroless Ni⁃P coating on magnesium alloy