journal article·2018-09

Silver nanoparticles supported on graphitization micro-diamond as an electrocatalyst in alkaline medium

Hao Huang, Yang Liu, Xilong Ma, Jie Hu

Vacuum· Volume 155
Publisher page

Abstract

Abstract Graphitization micro-diamond composites are prepared by spark plasma sintering and which was modified by Ag nanoparticles subsequently. The samples are characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller analysis and Raman spectroscopy. Results show that the 1400-15 min diamond/graphite composite with core/shell structure has a more suitable thickness of graphite layer than other sintered samples. The silver nanoparticles are dispersed on the surface of graphitization micro-diamond in the form of elemental silver, with a size of approximately 15 nm. Electrocatalyst activities are investigated by cyclic voltammetry, linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy techniques. The test of the rotating disk electrode reveals the electrons transfer number of Ag/1400-15 min is about 3.90. Compared with pure micro diamond and 1400-15 min diamond/graphite composite, Ag/1400-15 min composites shows superior electrocatalytic activity and durability because of Ag particles facilitating charge transfer, and the core/shell structure of diamond/graphite can provide more active sites during the electrochemical reaction. The present results highly promise the silver-modified graphitization micro-diamond composite as a potential electrocatalyst.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Graphene research and applications · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Electrochemical properties of nanodiamond powder electrodes10.1016/j.diamond.2006.03.010 ↗
2. Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon10.1016/S0043-1648(03)00076-0 ↗
3. Thermal characterization of diamond films through modulated photothermal radiometry10.1021/am405188r ↗
4. A review of modified DLC coatings for biological applications10.1016/S0925-9635(03)00081-5 ↗
5. Conductivity of boron-doped polycrystalline diamond films: influence of specific boron defects10.1140/epjb/e2013-40528-x ↗
6. A novel surface-enhanced Raman scattering substrate: diamond nanopit infilled with gold nanoparticle10.1016/j.matlet.2014.07.139 ↗
7. Platinum nanoparticles supported on epitaxia TiC/nanodiamond as an electrocatalyst with enhanced durability for fuel cells10.1016/j.carbon.2013.10.012 ↗
8. Covalent modification of graphene and micro-diamond with redox active substrates via photogenerated carbenes10.1016/j.carbon.2014.12.053 ↗
9. Boron-doped diamond electrodes: electrochemical, atomic force microscopy and Raman study towards corrosion-modifications at nanoscale10.1016/j.electacta.2015.04.124 ↗
10. Direct amination of diamond surfaces by electroless treatment in liquid ammonia solution10.1016/j.elecom.2014.01.024 ↗
11. Performance characteristics of circular diamond saws in cutting different types of rocks10.1016/j.diamond.2003.08.016 ↗
12. Microstructure and properties of diamond/SiC composites prepared by tape-casting and chemical vapor infiltration process10.1016/j.jeurceramsoc.2014.05.042 ↗
13. Studies of the chemical functionalisation of diamond electrodes10.1016/j.diamond.2007.01.011 ↗
14. All-diamond microelectrodes as solid state probes for localized electrochemical sensing10.1021/acs.analchem.5b00756 ↗
15. Surface modification and electrochemical behaviour of undoped nanodiamonds10.1016/j.electacta.2012.03.169 ↗
16. A new sawing machine by diamond wire10.1007/s00170-013-5247-8 ↗
17. The growth of AA graphite on (111) diamond10.1063/1.2975333 ↗
18. Typical surface segments of diamond-core carbon nanoparticles10.1007/s11224-015-0644-2 ↗
19. The influence of sterilization on nitrogen-included ultrananocrystalline diamond for biomedical applications10.1016/j.msec.2015.12.041 ↗
20. Fabrication and characterization of anti-fouling and anti-bacterial Ag-loaded graphene oxide/polyethersulfone mixed matrix membrane10.1016/j.jiec.2015.06.004 ↗
21. Surface-enhanced Raman scattering with Ag nanoparticles optically trapped by a photonic crystal cavity10.1021/nl304069n ↗
22. Large scale synthesis and formation mechanism of silver nanoparticles in solid-state reactions at ambient temperature10.1016/j.mseb.2015.03.002 ↗
23. Nanodiamond decorated with silver nanoparticles as a sensitive film modifier in a jeweled electrochemical sensor: applicationto voltammetric determination of thioridazine10.1002/elan.201200339 ↗
24. Microstructure and graphitization behavior of diamond/SiC composites fabricated by vacuum vapor reactive infiltration10.1007/s12598-014-0361-9 ↗
25. Fabrication of diamond–SiC–TiC composite by a spark plasmasintering-reactive synthesis method10.1016/j.jeurceramsoc.2014.08.006 ↗
26. Raman micro-spectroscopy on diamond, graphite and other carbon polymorphs from the ultrahigh-pressure metamorphic kimi complex of the rhodope metamorphic province, ne Greece10.1016/j.epsl.2005.11.014 ↗
27. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
28. Hemocompatibility and anti-bacterial properties of silver doped diamond-like carbon prepared by pulsed filtered cathodic vacuum arc deposition10.1016/j.diamond.2006.11.001 ↗
29. Nano titania modified nanodiamonds as stable electrocatalyst supports for direct methanol fuel cells10.1149/2.0051503jes ↗
30. A standardization for BET fitting of adsorption isotherms10.1016/j.micromeso.2011.05.022 ↗
31. Ag modified LaMnO3 nanorods-reduced graphene oxide composite applied in the photocatalytic discoloration of direct green10.1016/j.solidstatesciences.2016.10.008 ↗
32. carbon-coated perovskite BaMnO3 porous nanorods with enhanced electrocatalytic perporites for oxygen reduction and oxygen evolution10.1016/j.electacta.2015.05.184 ↗
33. High-density iron nanoparticles encapsulated within nitrogen-doped carbon nanoshell as efficient oxygen electrocatalyst for zinc–air battery10.1016/j.nanoen.2015.02.025 ↗
34. Characterization and application of electrodeposited Pt, Pt/Pd, and Pd catalyst structures for direct formic acid micro fuel cells10.1016/j.electacta.2005.02.018 ↗
35. Electrochemical impedance spectroscopy of polycrystalline boron doped diamond layers with hydrogen and oxygen terminated surface10.1016/j.diamond.2015.03.002 ↗
36. Preparation and characterization of silver-modified La0.8Sr0.2MnO3 cathode powders for solid oxide fuel cells by chemical reduction method10.1016/j.ijhydene.2012.10.104 ↗