journal article·2013-03

Characterization of composite SiOx/polymer films deposited on pet substrates by RF reactive magnetron sputtering

Zhuang Liu, Xinxin Ma, ChunLi Yang, Fangjun Xu

Vacuum· Volume 89
Publisher page

Abstract

Abstract Composite SiO x /polymer films have been prepared on polyethylene terephthalate (PET) substrates by radio frequency (RF) reactive magnetron co-sputtering, from which two balanced magnetrons are equipped with silica and dicyclopentadiene dioxide cured with maleic anhydride (DCPD/MA) targets. Morphology and composition of the deposited composite films have been analyzed by means of AFM, FTIR, and XPS. The influences of preparation procedure parameters, primarily including RF power densities and the ratio of RF powers delivered to the two targets, on the obtained films properties such as surface roughness, water vapor/oxygen transmission rate and flexibility have been investigated. As P DCPD / MA / P SiO 2 , the ratio of RF powers delivered to the individual target changed from 0.13 to 7.5, the roughness of films decreases from 2.793 nm down to 0.9 nm and the numbers of cracks produced in the films after folding are reduced dramatically. At the ratio of RF power of 3, higher RF power densities and lower work pressure have better performance in preventing the permeation of water vapor and oxygen. The minimum transmission rates of water vapor and oxygen are 0.26 g/m 2 /24 h atm and 0.38 cc/m 2 /day atm, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. RF sputtering of hydrocarbon polymers and their derivatives10.1016/S0257-8972(03)00573-5 ↗
2. RF sputtering of polymers and its potential application10.1016/S0042-207X(00)00321-3 ↗
3. RF magnetron sputtering of polypropylene10.1016/j.vacuum.2004.02.007 ↗
4. RF magnetron sputtering and evaporation of polyisobutylene and low density polyethylene10.1016/j.surfcoat.2005.02.107 ↗
5. Composite SiOx/hydrocarbon plasma polymer films prepared by RF magnetron sputtering of SiO2 and polyimide10.1016/j.vacuum.2006.10.013 ↗
6. Composite SiOx/fluorocarbon plasma polymer films prepared by r.f. magnetron sputtering of SiO2 and PTFE10.1016/j.vacuum.2006.02.007 ↗
7. Composite SiOx/hydrocarbon plasma polymer films prepared by RF magnetron sputtering of SiO2 and polyethylene or polypropylene10.1016/j.vacuum.2006.02.006 ↗
8. SiOx films prepared using RF magnetron sputtering with a SiO target10.1016/j.jnoncrysol.2005.12.008 ↗
9. Characterization of the silicon oxide thin films deposited on polyethylene terephthalate substrates by radio frequency reactive magnetron sputtering10.1016/j.tsf.2006.11.039 ↗