journal article·2022-09

Microstructure, phase composition and hardness of Ti–Au cladding deposited on Ti–6Al–4V substrate by electron beam powder bed fusion method

Vasiliy Klimenov, Mikhail Slobodyan, Vasiliy Fedorov, Irina Strelkova, Anatoliy Klopotov, Margarita Khimich, Sergey Matrenin, Darya Semeykina

Vacuum· Volume 203
Publisher page

Abstract

In this study, a Ti-Au cladding was deposited on a substrate from the Ti-6Al-4V alloy by the electron beam powder bed fusion method in a vacuum. The main goal was to assess the possibility of using titanium powders and gold foils as a feedstock for additive manufacturing of such dental products. The microstructure, chemical element distributions, phase composition and hardness of the formed Ti-Au alloy were studied using optical microscopy, energy dispersive X-ray analysis, as well as X-ray diffraction and nanoindentation tests. Goldcontaining intermetallic compounds were observed through the entire cladding thickness. The alpha-Ti, alpha-Au, AuTi and AuTi3 phases were found, in addition to the Ti3Au one, which provided hardness values greater than those of conventional titanium alloys. It was shown by results of the crystal-geometric and X-ray phase analysis that the AuTi3 phase possessed the most densely packed A15 structure. This fact correlated with the obtained data on the deviation of the atomic volume per ion from Zen's law and the high hardness levels. Metallurgical patterns of the microstructure formation that affected the functional properties of such claddings were discussed and a further research direction was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Leyens · 2003
2. 2015
3. Dental alloys
4. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
5. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
6. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
7. Titanium alloys and their machinability — a review10.1016/S0924-0136(96)00030-1 ↗
8. Grain size of gold and gold alloys10.1007/BF03214600 ↗
9. Gold in dentistry: alloys, uses and performance10.1007/BF03215496 ↗
10. Stanishevskaya · 2016 · 66
11. Palladium in dentistry
12. Mechanical, thermal, and chemical analyses of the binary system Ti-Au in the development of a dental alloy10.1002/1097-4636(20001215)52:4<678::AID-JBM12>3.0.CO;2-P ↗
13. Corrosion behavior and microstructures of experimental Ti-Au alloys10.4012/dmj.23.109 ↗
14. Effect of gold addition on the microstructure, mechanical properties and corrosion behavior of Ti alloys10.1007/s13404-014-0138-9 ↗
15. High hardness in the biocompatible intermetallic compound β-Ti3Au10.1126/sciadv.1600319 ↗
16. Mechanical properties, electrochemical behavior and biocompatibility of the Ti-based low-alloys containing a minor fraction of noble metals10.1016/j.jallcom.2017.10.231 ↗
17. Microstructure of hard biocompatible Ti1−xAux alloys10.1016/j.matchar.2019.01.013 ↗
18. The Ti-Au (gold-titanium) system10.1007/BF02868667 ↗
19. Thermodynamic assessment of the Ti-Au system10.1016/S0364-5916(01)00026-8 ↗
20. Additively manufactured metals for medical applications
21. Strategies for creating living, additively manufactured, open-cellular metal and alloy implants by promoting osseointegration, osteoinduction and vascularization: an overview10.1016/j.jmst.2018.09.003 ↗
22. Additive manufacturing and 3D printing of metallic biomaterials10.1016/j.engreg.2021.11.002 ↗
23. Additively manufactured metallic biomaterials
24. Microstructure and compressive behavior of Ti-6Al-4V alloy built by electron beam free-form fabrication10.1007/s11665-020-05223-9 ↗
25. Electron beam welding – techniques and trends – Review10.1016/j.vacuum.2016.05.004 ↗
26. Fracture toughness of TA31 titanium alloy joints welded by electron beam welding under constrained condition10.1016/j.msea.2019.138612 ↗
27. Microstructural characteristics and computational investigation on electron beam welded Ti-6Al-4V alloy10.1016/j.jmatprotec.2020.116837 ↗
28. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions10.1016/j.jmatprotec.2013.06.010 ↗
29. Scanning speed effect on mechanical properties of Ti-6Al-4V alloy processed by electron beam additive manufacturing10.1016/j.promfg.2015.09.026 ↗
30. Mechanical behavior of Ti-6Al-4V manufactured by electron beam additive fabrication
31. Powder and wire melting of titanium alloys by electron beam10.1016/j.promfg.2019.12.092 ↗
32. Beam current effect on microstructure and properties of electron-beam-melted Ti-6Al-4V alloy10.1007/s11665-019-04344-0 ↗
33. Densification behavior, microstructure evolution and fretting wear performance of in-situ hybrid strengthened Ti-based composite by laser powder-bed fusion10.1016/j.vacuum.2018.11.023 ↗
34. Additive manufacturing of multiple layered materials (Ti6Al4V/316L) and improving their tribological properties with glow discharge surface modification10.1016/j.vacuum.2020.109893 ↗
35. Indentation strain rate sensitivity of laser-powder bed fused and electron beam melted Ti-6Al-4V
36. Effect of energy parameters of pulsed laser welding of Zr-1%Nb alloy on metal contamination with gases and properties of welds10.1016/j.jmapro.2019.06.025 ↗
37. Resistance, electron- and laser-beam welding of zirconium alloys for nuclear applications: a review10.1016/j.net.2020.10.005 ↗
38. Metallurgy, mechanistic models and machine learning in metal printing10.1038/s41578-020-00236-1 ↗
39. Metallurgy of a Ti–Au alloy synthesized by controlled electric resistance fusion10.1016/j.intermet.2020.106968 ↗
40. 2015
41. Ladd · 2013
42. Line profiles of neutron powder-diffraction peaks for structure refinement10.1107/S0365110X67000234 ↗
43. E. Svanidze, T. Besara, M. F. Ozaydin, Yan Xin, K. Han, H. Liang, T. Siegrist, E. Morosan, Ti1−xAux alloys: hard biocompatible metals and their possible applications. https://arxiv.org/abs/1410.7308.
44. M.-P. Bacos, M. Perrut, D. Boivin, N. Horezan, E. Rimpot, C. Rio, C. Sanchez, Effect of Au diffusion in Au-coated (gamma + alpha2) titanium aluminides. https://hal.archives-ouvertes.fr/hal-01827370.
45. Joining of Cu, Ni, and Ti using Au-Ge-based high-temperature solder alloys10.1007/s11665-014-0864-4 ↗
46. Kornilov · 1964
47. Formation of metastable phases and diagrams of metastable equilibrium
48. Hume-Rothery · 1962
49. Pearson · 1972
50. Potekaev · 2004
51. Matveeva · 1989
52. Potekaev · 2014
53. Analytic binary alloy volume–concentration relations and the deviation from Zen's law10.3390/app11136231 ↗