A comparative study of the effect of different surface treatments on polymeric substrates
Source abstract
Abstract
In this work, we investigated the effect of three surface treatments on the properties of polymethyl methacrylate (PMMA) and polycarbonate (PC). The treatments consisted of ultraviolet-ozone, sputter etching and oxygen plasma. Their effect on the adhesion between a vacuum deposited TiO2 coating and the substrate were also assessed by cross-cut test. Detailed characterization of the optical properties, surface wettability, morphology and the chemical composition of the surface after the treatments was performed for the test samples. Reference samples without any surface treatment were also used for comparison purposes. Optical transmittance of the samples was not significantly altered by the surface treatments. Only the presence of the coating led to an increase of the system refractive index and to a small decrease of the light transmittance. All surface treatments lead to an increase of oxygen species in polymer surface, which rise the wettability. In particular, the ultraviolet-ozone treatment shows a higher change in the oxygen/carbon ratio, resulting however in the weakest adhesion between the coating and substrate, due to the generation of low molecular weight compounds weakly bonded to the surface. Furthermore, regardless of the surface treatment employed, the PMMA substrate presented lower film adhesion than PC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Nanofabrication and Lithography Techniques · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Piegari · 2013
2. 1992
3. RF plasma treatment of polycarbonate substrates
4. Micro-scratch analysis and mechanical properties of plasma-deposited silicon-based coatings on polymer substrates10.1016/S0040-6090(98)01338-8 ↗
5. Review of modern techniques to generate antireflective properties on thermoplastic polymers10.1364/AO.45.001608 ↗
6. Oxygen and nitrogen plasma hydrophilization and hydrophobic recovery of polymers10.1063/1.3673251 ↗
7. Surface modification of polymers: methods and applications10.1002/admi.201801247 ↗
8. Effect of corona treatment on adhesion enhancement of LLDPE10.1016/j.surfcoat.2017.12.018 ↗
9. Flame treatment technology and its applications
10. Surface modification of polycarbonate by ultraviolet radiation and ozone10.1080/00218460601102860 ↗
11. Selective crack suppression during deformation in metal films on polymer substrates using electron beam irradiation10.1038/s41467-019-12451-8 ↗
12. Linear ion beam applications for roll-to-roll metal thin film coatings on PET substrates10.5757/ASCT.2015.24.5.162 ↗
13. Surface modification and ageing of PMMA polymer by oxygen plasma treatment10.1016/j.vacuum.2011.07.005 ↗
14. Surface activation of poly(methyl methacrylate) via remote atmospheric pressure plasma10.1002/ppap.200900113 ↗
15. Improved coating adhesion on polymers with novel laser machining pre-treatment10.4028/www.scientific.net/KEM.894.51 ↗
16. Modification of the micro- and nanotopography of several polymers by plasma treatments10.1016/S0169-4332(02)01503-9 ↗
17. 2020
18. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
19. XPS: binding energy calibration of electron spectrometers 4 - assessment of effects for different x-ray sources, analyser resolutions, angles of emission and overall uncertainties10.1002/(SICI)1096-9918(199808)26:9<617::AID-SIA407>3.0.CO;2-V ↗
20. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
21. Analysis of the dispersion of optical plastic materials10.1016/j.optmat.2006.07.010 ↗
22. Optical characterizations and refractive index dispersion parameters of annealed TiO2 thin films synthesized by RF-sputtering technique at different flow rates of the reactive oxygen gas10.1016/j.physb.2019.411718 ↗
23. Optical parameters induced by phase transformation in RF magnetron sputtered TiO2 nanostructured thin films10.1016/j.pnsc.2014.05.010 ↗
24. RF magnetron sputtering deposition of TiO2 thin films in a small continuous oxygen flow rate10.3390/coatings9070442 ↗
25. RF magnetron sputtering deposition of TiO2 thin films in a small continuous oxygen flow rate10.3390/coatings9070442 ↗
26. TiO2-SiO2 hard coating on polycarbonate substrate by microwave assisted sol-gel technique10.1007/s10971-011-2413-z ↗
27. Plasma pre-treatment and TiO2 coating of PMMA for the improvement of antibacterial properties10.1016/j.surfcoat.2010.07.013 ↗
28. Highly reflective aluminum films on polycarbonate substrates by physical vapor deposition10.1016/j.apsusc.2019.144596 ↗
29. Low temperature bonding of PMMA and COC microfluidic substrates using UV/ozone surface treatment10.1039/b618901f ↗
30. Stability of UV/ozone-treated thermoplastics under different storage conditions for microfluidic analytical devices10.1039/C7RA07435B ↗
31. Photoinduced surface wettability conversion of ZnO and TiO2 thin films10.1021/jp002525j ↗
32. Comparative study of RF reactive magnetron sputtering and sol-gel deposition of UV induced superhydrophilic TiOx thin films
33. Contact angle relaxation on amorphous, mixed-phase (anatase plus rutile), and anatase TiO2 films and its mechanism10.1021/acs.langmuir.0c03259 ↗
34. Surface modification of polycarbonate and polyethylene naphtalate foils by UV-ozone treatment and mu Plasma printing10.1016/j.apsusc.2013.11.089 ↗
35. Studies on low-temperature direct bonding of VUV/O-3-, VUV- and O-2 plasma-pre-treated poly-methylmethacrylate10.1088/0960-1317/21/8/085028 ↗
36. Surface characterization and radical decay studies of oxygen plasma-treated PMMA films10.1002/sia.5181 ↗
37. Markedly enhanced surface hydroxyl groups of TiO2 nanoparticles with superior water-dispersibility for photocatalysis10.3390/ma10050566 ↗
38. Significant enhancement of the adhesion between metal films and polymer substrates by UV-ozone surface modification in nanoscale10.1021/acsami.6b09930 ↗
39. Development and characterization of a capillary-flow microfluidic device for nucleic acid detection
40. The effect of thickness on surface structure of rf sputtered TiO2 thin films by XPS, SEM/EDS, AFM and SAM
41. Emergence and evolution of crystallization in TiO2 thin films: a structural and morphological study10.3390/nano11061409 ↗