journal article·2021-06

Hard alloy films with enhanced resistance to cracking

J. Musil, Z. Čiperová, R. Čerstvý, Š. Kos

Vacuum· Volume 188
Publisher page

Abstract

Abstract The article reports on the mechanical properties of alloy films prepared by magnetron sputtering. Cracking is a great drawback of alloy films because it strongly limits many of their practical applications. It is shown that hard alloy films resistant to cracking must be superelastic and exhibit a high ratio H/E* ≥ 0.1; here H is the hardness and E* is the effective Young's modulus of the film. As examples, mechanical properties of the Si-based hard alloy films with enhanced resistance to cracking are given. Furthermore, the effect of the addition of Si and N into single element Mg films on the film mechanical properties and its relation to the changes of the material homologous temperature is investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
2. Flexible hard nanocomposite coatings10.1039/C5RA09586G ↗
3. Flexible hard (Zr,Si) alloy films prepared by magnetron sputtering10.1016/j.tsf.2019.03.028 ↗
4. Physical and mechanical properties of sputtered Ta-Si-N films with a high (≥40 at.%) content of Si10.1116/1.1710499 ↗
5. Structure and properties of magnetron sputtered Zr-Si-N films with a high (≥25 at.%) Si content10.1016/j.tsf.2004.11.190 ↗
6. Physical properties and high-temperature oxidation resistance of sputtered Si3N4/MoNx nanocomposite coatings10.1116/1.1947798 ↗
7. Properties of reactively sputtered W-Si-N films10.1016/j.surfcoat.2004.12.004 ↗
8. Difference in high-temperature oxidation resistance of amorphous Zr-Si-N and W-Si-N films with a high Si content10.1016/j.apsusc.2005.11.038 ↗
9. High-temperature oxidation resistance of Ta-Si-N films with a high Si content10.1016/j.surfcoat.2005.02.097 ↗
10. Thermal stability of magnetron sputtered Zr-Si-N films10.1016/j.surfcoat.2006.07.206 ↗
11. Ti-Si-N nanocomposite films with a high content of Si10.1002/ppap.200731408 ↗
12. Properties of magnetron sputtered Al-Si-N thin films with a low and high Si content10.1016/j.surfcoat.2007.12.024 ↗
13. Microstructural control of Cr-Si-N films by a hybrid arc ion plating and magnetron sputtering process10.1016/j.actamat.2009.07.001 ↗
14. Soni: development of hard and optically transparent Al-Si-N nanocomposite coatings
15. Effect of nitrogen-argon flow ratio on the microstructural and mechanical properties of AlSiN thin films prepared by high power impulse magnetron sputtering10.1016/j.surfcoat.2017.01.085 ↗
16. Soni, S.K. Sharma, S.K. Mishra: The effect of Si content on structural, mechanical and optical behavior of magnetron sputtered Al-Si-N nanocomposite films, J. Alloys Compd. 831 (2020), 154686.10.1016/j.jallcom.2020.154686 ↗
17. Influence of Si contents on tribological characteristics of CrSAlSiN nanocomposite coatings10.1016/j.tsf.2015.02.022 ↗
18. Effect of Si content on the microstructure and mechanical properties of Ti-Si-B-C nanocomposite hard coatings10.1007/s11661-018-5028-y ↗
19. Toughness of Si alloyed high-entropy nitride coatings10.1016/j.matlet.2019.05.074 ↗
20. Effect of Si content on the microstructure and mechanical properties of Mo-Al-Si-N coatings
21. Influence of ternary elements (X= Si, B,Cr) on TiAlN coating deposited by magnetron sputtering process with single alloying targets10.1016/j.tsf.2013.05.046 ↗
22. Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: oxidation and mechanical properties behaviour with temperature and duration of oxidation10.1016/j.surfcoat.2016.01.039 ↗
23. A review of the intrinsic ductility and toughness of hard transitional-metal nitride alloy thin films10.1016/j.tsf.2019.137479 ↗
24. Impact of introducing SiC and Si on microstructure and oxidation resistance of MoSi2/SiC coated C/C composites prepared by SAPS10.1016/j.vacuum.2020.109477 ↗
25. Growth and properties of amorphous Ti-B-S-N films deposited by hybrid HIPIMS/DC-magnetron co-sputtering from TiB2 and Si targets10.1016/j.surfcoat.2014.10.053 ↗
26. Low peak power deposition regime in HIPIMS: deposition of hard and dense nanocomposite Ti-Si-N films by DOMS without the need of energetic bombardment10.1016/j.surfcoat.2020.125996 ↗
27. Semiconducting Mg2Si thin films prepared by molecular-beam epitaxy10.1103/PhysRevB.54.16965 ↗
28. Growth mechanism and optical properties of semiconducting Mg2Si thin films10.1016/S0167-9317(99)00287-7 ↗
29. Deposition and microstructures of Mg-Si thin film by ion beam sputtering10.1016/j.surfcoat.2005.01.047 ↗
30. Investigation of the magnesium Silicide – Mg2Si films
31. Solid phase growth and properties of Mg2Si films on Si(111)10.1016/j.tsf.2007.02.049 ↗
32. Comparison study of Mg-Si films deposited by DC- and RF-Glow discharge sputtering
33. Epitaxial orientation of Mg2Si(110) thin film on Si(111) substrate10.1063/1.2821916 ↗
34. Electrical properties of (110)-oriented nondoped Mg2Si films with p-type conduction prepared by RF magnetron sputtering method10.1007/s11664-014-3040-6 ↗
35. K. Zhang, H.Y. Song, Q. Deng, Y.L. Li: Interaction mechanism between twin boundary and crystalline/amorphous interface in dual-phase Mg alloys, J. Non-Cryst. Solids 534 (2020), 119954 (7 pages).10.1016/j.jnoncrysol.2020.119954 ↗
36. Improved the elevated temperature mechanical properties of Al-Si alloy deposited with Al-Si coating by magnetron sputtering10.1016/j.vacuum.2018.01.013 ↗
37. Mechanical properties of magnetron sputtered free standing Mg-Ag alloy films
38. M. Fenker, M. Balzer, H. Kapl, A. Heyn, M. Rohwerder, N. Fink, A. Mingers: Corrosion protection of steel substrates by magnetron sputtered TiMgN hard coatings: influence of surface morphology and Mg on Mg release in NaCl solutions, Thin Solid Films.
39. Greczynski · 2020
40. Gupta · 2011 · 1
41. Indentation-induced phase transformations in silicon: influence of load, rate and indenter angle on the transformation behavior10.1016/j.actamat.2004.12.025 ↗
42. Study of the structure and properties of thick vacuum condensates of nickel, titanium, tungsten, aluminum oxide and zirconium oxide
43. High rate thick films growth10.1146/annurev.ms.07.080177.001323 ↗
44. Stress-related effects in thin films10.1016/0040-6090(89)90030-8 ↗
45. The role of energy in formation of sputtered nanocomposite films10.4028/www.scientific.net/MSF.502.291 ↗
46. The structure and mechanical properties of DC magnetron sputteredTiC/Cu films10.1016/j.vacuum.2006.07.013 ↗
47. Evolution of microstructure and macrostress in sputtered hard Ti(Al,V)N films with increasing energy delivered during their growth by bombarding ions10.1116/1.4967935 ↗
48. Effect of energy on macrostress in Ti(Al,V)N films prepared by magnetron sputtering10.1016/j.vacuum.2018.09.038 ↗
49. Advanced hard nanocomposite coatings with enhanced toughness and resistance to cracking