Hydrogen absorption properties of Ce23Mg4Ni7 alloy at medium vacuum
Source abstract
Abstract
Abstract Ce–Mg–Ni alloys have a high affinity for hydrogen, and are typical examples of compounds that form hydrides. These hydrides may be formed in medium vacuum by using a hydrogen getter. In this study, Ce23Mg4Ni7 ternary alloy was fabricated by vacuum induction melting. The hydrogen absorption kinetics of the alloy were tested using an automatic Sievers device, and its hydride microstructure was observed via a transmission electron microscopy (TEM). The results indicate that the ternary phase, Ce23Mg4Ni7, is the main phase of the alloy, and the alloy absorbed hydrogen to form a Ce23Mg4Ni7Hx hydride. Under a hydrogen pressure of 5000 Pa at 50 °C, the equilibrium pressure of the system can be reduced to less than 10 Pa. By the eighth time of backfilling to compensate for hydrogen, the equilibrium pressure is reduced to 1 × 10−2 Pa. The Langmuir absorption equation was used to fit the hydrogen absorption results of the alloy, and it was shown that the saturated hydrogen absorption capacity of the alloy is 55.72 mL, and the absorption coefficient is 0.0078 at 50 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Magnetic Properties of Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Characterisation of sputter-ion pumps to be used in combination with non-evaporable getters10.1016/j.vacuum.2015.10.010 ↗
2. Hydrogen adsorption characteristics of Zr57V36Fe7 non-evaporable getters at low operating temperatures10.1016/j.vacuum.2018.04.038 ↗
3. Synergetic effects of cerium and nickel in Ce-Ni-MFI catalysts on low-temperature water-gas shift reaction10.1016/j.fuel.2018.09.096 ↗
4. Hydrogen occlusion behaviors of ZrVFe alloys under mild hydrogen pressures and lowering of their hydrogen desorption temperatures10.1016/j.ijhydene.2015.11.051 ↗
5. Application of compact non-evaporable getter and sputter ion pump combination in UHV system of HIAF10.1016/j.vacuum.2018.08.038 ↗
6. Preparation and pumping characteristics of Ti–7.5wt.%Mo getter10.1016/j.jallcom.2009.06.011 ↗
7. Effects of Mo on the microstructure and hydrogen sorption properties of Ti-Mo getters10.1016/S1000-9361(07)60028-4 ↗
8. Preparation and hydrogen sorption performance of a modified Zr–C getter10.1016/j.vacuum.2007.10.008 ↗
9. A new cost effective composite getter for application in high-vacuum-multilayer-insulation tank10.1016/j.vacuum.2016.05.025 ↗
10. Applications of non evaporable getter pump in vacuum metrology10.1016/j.vacuum.2010.11.008 ↗
11. Characterization of ZAO® sintered getter material for use in fusion applications10.1016/j.fusengdes.2019.03.026 ↗
12. Nitrogen sorption tests, SEM-windowless EDS and XRD analysis of mechanically alloyed nanocrystalline getter materials10.1016/S0965-9773(99)00372-4 ↗
13. Vacuum properties of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00246-3 ↗
14. Decreasing surface outgassing by thin film getter coatings10.1016/S0042-207X(98)00017-7 ↗
15. Pumping properties of Ti–Zr–Hf–V non-evaporable getter coating10.1016/j.vacuum.2013.07.035 ↗
16. Miyazawa · J. Vac. Sci. Technol. · 2018 · 3610.1116/1.5037023 ↗
17. Single metal zirconium non-evaporable getter coating10.1016/j.vacuum.2020.109510 ↗
18. Effect of temperature on the γ-MnO 2/“Ag 2 O” hydrogen getter structure10.1016/j.fusengdes.2016.06.014 ↗
19. The low-temperature reduction of Pd-doped transition metal oxide surfaces with hydrogen10.1016/S1385-8947(02)00147-X ↗
20. Effect of rare earth elements on sorption characteristics of nanostructured Zr–Co sintered porous getters10.1016/j.vacuum.2014.09.008 ↗
21. Activation of Zr–Co–rare earth getter films: an XPS study10.1016/j.apsusc.2010.04.006 ↗
22. Influence of deposition pressure, substrate temperature and substrate outgassing on sorption properties of Zr–Co–Ce getter films10.1016/j.jallcom.2015.11.208 ↗
23. The absorption of gases by barium getter films applied as a tool10.1016/0042-207X(60)90136-6 ↗
24. New lithium gas sorbents: I. The evaporable variant10.1016/j.jallcom.2007.01.158 ↗
25. Getters for vacuum insulated glazing10.1016/j.vacuum.2018.06.012 ↗
26. Preparation and characterization of Ni/ZrCoCe stack getter films10.4028/www.scientific.net/MSF.944.619 ↗
27. Towards easily tunable hydrogen storage via a hydrogen-induced glass-to-glass transition in Mg-based metallic glasses10.1016/j.actamat.2016.08.020 ↗
28. Modeling of amorphous phase formation and its thermodynamic behaviour in CeMgH, CeNiH and MgNiH10.1016/j.intermet.2018.10.026 ↗
29. Remarkably improved hydrogen storage properties of LiNH2-LiH composite via the addition of CeF410.1016/j.jallcom.2017.10.239 ↗
30. Hydrogen storage properties of Mg–Ce–Ni nanocomposite induced from amorphous precursor with the highest Mg content10.1016/j.ijhydene.2012.07.073 ↗
31. Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale10.1016/j.actamat.2018.02.064 ↗
32. On a theory of the van der Waals adsorption of gases10.1021/ja01864a025 ↗
33. Masel · 1996