Influence of selenization temperatures on the microstructures and photoelectric properties of iron-ion doped Cu(In,Ga)Se2 thin-film solar cells
Source abstract
Abstract
Abstract Cu(In,Ga)Se2 (CIGS) thin films were prepared on molybdenum-coated flexible stainless steel substrates through a non-vacuumspin-coating process followed by selenization at temperatures ranging from 450 °C to 575 °C. The effects of selenization temperatures and concentration of iron ions on the photoelectric properties of the CIGS solar cells was thoroughly investigated. All X-ray diffraction (XRD) patterns appropriately matched with those of CIGS phase. The diffraction peak intensities of undoped CIGS films were increased with an increase in selenization temperatures. However, XRD peak intensities of iron-ion doped CIGS films were decreased with the elevation of selenization temperatures owing to the degradation of thermal stability of CIGS films after iron-ion doping. As the selenization temperatures increased, the grain sizes of particles in CIGS films increased, and the films became densified with flat surfaces. The values of Voc, Jsc, and fill factor for CIGS solar cells prepared at 450 °C were 0.401 V, 21.84 mA/cm2, and 41.12%, respectively. These parameters were enhanced with increasing selenization temperatures due to improved crystallinity of CIGS and densified microstructures. However, iron-ion doping deteriorated the photoelectric properties because iron ions diffused into the absorption layers at high temperatures. The present study indicates that iron-ion doping adversely affected the photoelectric performance and microstructures of CIGS solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Full space device optimization for solar cells10.1038/s41598-017-12158-0 ↗
2. An investigation on performance enhancement for KF post deposition treated CIGS solar cells fabricated by sputtering CIGS quaternary targets10.1016/j.vacuum.2018.02.023 ↗
3. Investigation of the light soaking behaviors in two-step sputter and selenization Cu(In,Ga)(Se,S)2 solar cells with different sulfur ratios10.1016/j.solmat.2015.09.045 ↗
4. Achievement of 17.9% efficiency in 30×30 cm2 Cu(In,Ga)(Se,S)2 solar cell sub-module by sulfurization after selenization with Cd-free buffer
5. Phase-controlled synthesis of Cu2ZnSnS4 powders via the microwave-assisted solvothermal route10.1016/j.jallcom.2015.01.254 ↗
6. Effects of the surface sulfurization reactions on the structural and photovoltaic properties of Cu(In,Ga)(Se,S)2 solar cells10.1016/j.tsf.2016.08.004 ↗
7. Bismuth-ion doped Cu(In,Ga)Se2 thin films: preparation, microstructures, and electrical properties10.1016/j.solmat.2013.12.023 ↗
8. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
9. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
10. Technological aspects of flexible CIGS solar cells and modules10.1016/j.solener.2004.04.010 ↗
11. A new silicon p-n junction photocell for converting solar radiation into electrical power10.1063/1.1721711 ↗
12. 24·5% Efficiency silicon PERT cells on MCZ substrates and 24·7% efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
13. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin-film solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
14. Cu(In,Ga)Se2 solar cells on stainless steel substrates covered with insulating layers10.1016/S0927-0248(02)00099-5 ↗
15. High-efficiency CIGS solar cells with optimization of layers thickness and doping10.1016/j.ijleo.2016.09.071 ↗
16. Electronic properties of Cu(In,Ga)Se2 solar cells on stainless steel foils without diffusion barrier10.1002/pip.1247 ↗
17. Monolithic DSSC/CIGS tandem solar cell fabricated by a solution process10.1038/srep08970 ↗
18. High efficiency low temperature grown Cu(In,Ga)Se2 thin film solar cells on flexible substrates using NaF precursor layers10.1002/pip.1064 ↗
19. CuIn1−xGaxSe2 growth process modifications: influences on microstructure, Na distribution, and device properties10.1016/j.solmat.2011.01.003 ↗
20. All solution-processed chalcogenide solar cells– from single functional layers towards a 13.8% efficient CIGS device10.1002/adfm.201402288 ↗
21. Solution processing of CuIn(S,Se)2 and Cu(In,Ga)(S,Se)2 thin film solar cells using metal chalcogenide precursors10.1016/j.tsf.2016.10.011 ↗
22. CIGS thin-film solar cells on steel substrates10.1016/j.tsf.2008.11.016 ↗
23. Influence of iron on defect concentrations and device performance for Cu(In,Ga)Se2 solar cells on stainless steel substrates10.1002/pip.2260 ↗
24. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
25. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
26. Influence of doping iron ions into Cu(In,Ga)Se2 films in the morphology and photovoltaic properties of thin-film solar cells
27. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
28. Recrystallization of Cu(In,Ga)Se2 thin films studied by X-ray diffraction10.1016/j.actamat.2013.04.006 ↗
29. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
30. Photovoltaic performance of flexible Cu(In,Ga)Se2 thin-film solar cells with varying Cr impurity barrier thickness10.1016/j.cap.2013.09.005 ↗
31. A model for the successful growth of polycrystalline films of CuInSe2 by multisource physical vacuum evaporation
32. Kaelin · Thin Solid Films · 2005 · 480 – 481 · 48610.1016/j.tsf.2004.11.007 ↗
33. Ahn · J. Phys. Chem. C · 2010 · 114 · 810810.1021/jp1007363 ↗
34. Park · J. Alloy. Comp. · 2012 · 513 · 6810.1016/j.jallcom.2011.09.080 ↗
35. Uhl · Prog. Photovoltaics Res. Appl. · 2012 · 20 · 52610.1002/pip.1246 ↗
36. Si-Doping Effects in Cu(In,Ga)Se2 Thin Films and Applications for Simplified Structure High-Efficiency Solar Cells10.1021/acsami.7b09019 ↗
37. Review on Alkali Element Doping in Cu(In,Ga)Se2 Thin Films and Solar Cells10.1016/J.ENG.2017.04.020 ↗
38. Alternative sodium sources for Cu(In,Ga)Se2 thin-film solar cells on flexible substrates10.1016/j.tsf.2011.01.399 ↗
39. Preferred orientation of Cu(In,Ga)Se2 thin film deposited on stainless steel substrate
40. Ga-grading profiles formed by incorporation of gallium into Cu(In1−xGax)Se2 absorber thin films10.1016/j.apsusc.2012.05.065 ↗