journal article·2015-11

Properties of aluminum oxide thin film obtained by metal plasma immersion ion implantation and deposition after zirconium-based pretreatment

Demetrio Jackson dos Santos, Lara Basilio Tavares, Renato Altobelli Antunes, Roosevelt Droppa, Tiago Fiorini da Silva, Maria Cecilia Salvadori

Vacuum· Volume 121
Publisher page

Abstract

Abstract Aluminum oxide thin films were obtained by metal plasma immersion ion implantation and deposition (MePIIID) and subsequently converted by a zirconium based surface pretreatment. Thin films atomic composition was studied using Rutherford backscattering spectrometry (RBS) and forward recoil spectrometry (FRS), especially for hydrogen measurement. Film morphology and thickness were investigated by atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM). Wettability was assessed by contact angle measurements. The corrosion behavior was investigated using EIS measurements and potentiodynamic polarization curves. Results pointed out to the deposition of a highly oxidized film with high hydrogen content with smooth surface. After conversion, wettability was greatly enhanced as denoted by the 50% decrease of the contact angle after conversion. The conversion treatment decreased the values of icorr from 1.51 to 0.75 μA cm−2. Excellent corrosion resistance was achieved when an acrylic coating was applied over the converted MePIIID layer, further decreasing icorr to 0.004 μA cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Hexafluorozirconic acid based surface pretreatments: Characterization and performance assessment10.1016/j.electacta.2010.07.037 ↗
2. Nano-ceramic hexafluorozirconic acid based conversion thin film: surface characterization and electrochemical study10.1016/j.surfcoat.2012.04.009 ↗
3. Zirconia primers for corrosion resistant coatings10.1016/j.surfcoat.2006.10.036 ↗
4. An electrochemical and SEM study of the mechanism of formation, morphology, and composition of titanium or zirconium fluoride-based coatings10.1016/j.surfcoat.2004.10.139 ↗
5. Optimization of commercial zirconic acid based pretreatment on hot-dip galvanized and Galfan coated steel10.1016/S0257-8972(99)00171-1 ↗
6. Formation of zirconium-based conversion coatings on aluminium and Al–Cu alloys10.1016/j.corsci.2012.08.031 ↗
7. Morphological analysis and corrosion performance of zirconium based conversion coating on the aluminum alloy 105010.1016/j.jiec.2014.09.036 ↗
8. Formation and characterization of Ti–Zr based conversion layers on AA6060 aluminium10.1016/j.surfcoat.2003.11.003 ↗
9. SKPFM and SEM study of the deposition mechanism of Zr/Ti based pre-treatment on AA60616 aluminum alloy10.1016/j.surfcoat.2007.02.039 ↗
10. A synergistic combination of tetraethylorthosilicate and multiphosphinic acid offers excellent corrosion protection to AA1100 aluminum alloy10.1016/j.apsusc.2013.02.131 ↗
11. Assessment of the surface reactivity of AA1050 aluminium alloy10.1002/sia.5271 ↗
12. Metal plasma immersion ion implantation and deposition: a review10.1016/S0257-8972(97)00037-6 ↗
13. Metal plasma immersion ion implantation and deposition (MePIIID) on screw-shaped titanium implant: the effects of ion source, ion dose and acceleration voltage on surface chemistry and morphology10.1016/j.medengphy.2011.01.011 ↗
14. Structure and properties of TiC/Ti coatings fabricated on NiTi by plasma immersion ion implantation and deposition10.1016/j.vacuum.2012.05.023 ↗
15. Hemocompatibility of titanium-based coatings prepared by metal plasma immersion ion implantation and deposition10.1016/j.nimb.2006.12.169 ↗
16. SKPFM and SEM study of the deposition mechanism of Zr/Ti based pre-treatment on AA60616 aluminum alloy10.1016/j.surfcoat.2007.02.039 ↗
17. Effect of adhesive characteristics on static strength of adhesive-bonded aluminum alloys10.1016/j.ijadhadh.2014.10.007 ↗
18. Attractive forces at interfaces10.1021/ie50660a008 ↗
19. Kaesche · 1966
20. Diggle · 1976 · vol. 4
21. Influence of surface hydroxyls on the formation of Zr-based conversion coatings on AA6014 aluminum alloy10.1016/j.surfcoat.2014.06.030 ↗
22. Initiation and growth of modified Zr-based conversion coatings on multi-metal surfaces10.1016/j.surfcoat.2013.09.059 ↗
23. Zirconia primers for corrosion resistant coatings10.1016/j.surfcoat.2006.10.036 ↗
24. Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating10.1016/j.apsusc.2015.03.148 ↗
25. Studies on the use of the coaxial plasma bulb for enhanced wettability of aluminum and polymethylmethacrylate surfaces10.1016/j.vacuum.2013.11.012 ↗
26. Investigation of the electrochemical behaviour of TiMo alloys in simulated physiological solutions10.1016/j.electacta.2013.09.116 ↗
27. Microstructure and corrosion resistance of Ce-V conversion coating on AZ31 magnesium alloy10.1016/j.apsusc.2015.02.195 ↗
28. Evaluation of corrosion resistance and self-healing behavior of zirconium-cerium conversion coating developed on AA2024 alloy10.1016/j.surfcoat.2015.02.049 ↗
29. Corrosion protection of galvanized steel by polyimide coatings: EIS and SEM investigations10.1016/j.porgcoat.2011.04.015 ↗
30. Electrochemical study of protective behavior of organic coating pigmented with zinc aluminum polyphosphate as a modified zinc phosphate at different pigment volume concentrations10.1016/j.porgcoat.2009.08.009 ↗
31. Contribution to a better understanding of different behaviour patterns observed with organic coatings evaluated by electrochemical impedance spectroscopy10.1016/j.corsci.2009.03.016 ↗
32. Effect of acidic etching and fluoride treatment on corrosion performance in Mg alloy AZ91D (MgAlZn)10.1016/j.electacta.2009.08.046 ↗
33. Corrosion resistance of chromium-free conversion coatings deposited on electrogalvanized steel from potassium hexafluorotitanate (IV) containing bath10.1016/j.surfcoat.2013.09.056 ↗
34. Effects of Ce-containing sol-gel coatings reinforced with SiO2 nanoparticles on the protection of AA202410.1016/j.corsci.2008.01.031 ↗
35. A high anticorrosive chromium-free conversion coating prepared with an alkaline conversion bath on electroless Ni–P coating10.1016/j.apsusc.2015.04.209 ↗
36. Inhibition of copper corrosion by isatin in aerated 0.5 M H2SO410.1016/S0010-938X(02)00134-8 ↗
37. Bockris · 1972 · vol. 2 · 1265
38. Effect of organic chelates on the performance of hybrid sol-gel coated AA 2024-T3 aluminium alloys10.1016/j.porgcoat.2009.09.004 ↗