journal article·2022-02

Sintering of a porous steel with high-Mn and high-Al content in vacuum

Zhigang Xu, Jinrong Liang, Youming Chen, Wenjun Li, Chuanbin Wang, Qiang Shen

Vacuum· Volume 196
Publisher page

Abstract

Abstract This paper studied the effect of sintering temperature on phase composition, microstructure, Mn sublimation and compressive properties of the Fe–Mn–Al–C powder compacts with high-Mn and high-Al content. The phase composition gradually transformed from heterogeneous phases at the temperature of ≤1100 °C to the dominant γ-Fe at 1200 °C, while α-Fe was the main phase at 1300 °C due to the sublimation of Mn. The sublimation of Mn in the sintered compacts increased with elevated temperature. The porosity of the sintered samples peaked at 1200 °C, then reduced sharply to ∼45% (open porosity) and ∼50% (overall porosity) at 1300 °C. The porosity trend was affected by the combined factors of solid diffusion/reactions, transient liquid phases, Mn sublimation and the final densification. The compressive strength at the macroscopic crack initiation increased drastically from ∼17 MPa at 800 °C to ∼296 MPa at 1300 °C. The failure mode transformed from transgranular cleavage fracture at the temperature of ≤1100 °C to ductile fracture at 1200 °C, followed by quasi-cleavage fracture at 1300 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel10.1016/j.actamat.2017.08.049 ↗
2. Aging hardening and precipitation behavior of Fe-31.6 Mn-8.8 Al-1.38 C austenitic cast steel10.1016/j.vacuum.2020.109662 ↗
3. Investigations of the microstructure evolution and tensile deformation behavior of austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition10.1016/j.actamat.2018.01.051 ↗
4. Exploring the influence of Al content on the hot deformation behavior of Fe-Mn-Al-C steels through 3D processing map10.1016/j.vacuum.2018.10.079 ↗
5. Current state of Fe-Mn-Al-C low density steels10.1016/j.pmatsci.2017.05.002 ↗
6. Characterization of microstructural evolution in austenitic Fe-Mn-Al-C lightweight steels with Cr content10.1016/j.matchar.2020.110717 ↗
7. A general perspective of Fe–Mn–Al–C steels10.1007/s10853-018-2551-6 ↗
8. In situ synthesis of a porous high-Mn and high-Al steel by a novel two-step pore-forming technique in vacuum sintering10.1016/j.jmst.2019.09.008 ↗
9. High-stiffness and strength porous maraging steel via topology optimization and selective laser melting
10. Microstructure and properties of porous high-N Ni-free austenitic stainless steel fabricated by powder metallurgical route10.3390/ma11071058 ↗
11. A novel process for manufacturing porous 316 L stainless steel with uniform pore distribution10.1016/j.matdes.2017.02.069 ↗
12. Synthesis of syntactic steel foam using gravity-fed infiltration10.1016/j.msea.2012.05.097 ↗
13. Innovative compound casting technology and mechanical properties of steel matrix syntactic foams
14. Steel foam for structures: a review of applications, manufacturing and material properties10.1016/j.jcsr.2011.10.028 ↗
15. Deformation behavior of open-cell stainless steel foams10.1016/j.msea.2014.07.098 ↗
16. Stainless steel foams made through powder metallurgy route using NH4HCO3 as space holder10.1016/j.matdes.2015.09.020 ↗
17. Fatigue life and strength of 316L sintered steel of varying porosity10.1016/j.ijfatigue.2018.02.023 ↗
18. Effects of carbamide shape and content on processing and properties of steel foams10.1016/j.jmatprotec.2012.05.015 ↗
19. Investigation on production parameters of steel foam manufactured through powder metallurgical space holder technique
20. Evolution of aluminum particle-involved phase transformation and pore structure in an elemental Fe-Mn-Al-C powder compact during vacuum sintering10.1016/j.vacuum.2020.109289 ↗
21. Study on the relationship between vacuum denitrification and manganese evaporation behaviours of manganese steel melts10.1016/j.vacuum.2021.110420 ↗
22. Weight loss behavior of a vacuum sintered powder metallurgical Fe–Mn–Si alloy10.1557/jmr.2016.506 ↗
23. Atomic mobilities, uphill diffusion and proeutectic ferrite growth in Fe–Mn–C alloys10.1016/j.calphad.2009.07.002 ↗
24. Experimental and computational study of diffusion mobilities for the bcc phase in the Fe-Al-(Si, Mn) systems10.1016/j.calphad.2018.03.009 ↗
25. Development of thermodynamic database for high Mn–high Al steels: phase equilibria in the Fe–Mn–Al–C system by experiment and thermodynamic modeling10.1016/j.calphad.2015.08.004 ↗
26. Thermodynamic calculation on the stability of (Fe,Mn)3AlC carbide in high aluminum steels10.1016/j.jallcom.2010.06.032 ↗
27. The effect of Mn and Al contents on the solvus of κ phase in austenitic Fe-Mn-Al-C alloys10.1016/S0254-0584(99)00026-7 ↗
28. PrecHiMn-4—a thermodynamic database for high-Mn steels10.1016/j.calphad.2016.11.006 ↗
29. Thermodynamic assessment of the Al-C-Fe system10.1016/j.calphad.2017.05.003 ↗
30. Phase equilibria and thermodynamics of the Fe-Al-C system: critical evaluation, experiment and thermodynamic optimization10.1016/j.actamat.2014.07.006 ↗
31. Reevaluation of the Fe-Mn phase diagram10.1007/s11669-004-0152-3 ↗
32. A thermodynamic evaluation of the Al-Mn system10.1007/BF02646113 ↗