journal article·2021-06

High temperature protection of NiCrAlSiY/Al–Cr–O coatings deposited by arc ion plating on nickel-based superalloy

Lijun Xian, Haibo Zhao, Guang Xian, Chencheng Wang, Hong He

Vacuum· Volume 188
Publisher page

Abstract

Abstract NiCrAlSiY/Al–Cr–O coatings with different thicknesses of the NiCrAlSiY bonding layers were deposited on commercial nickel-based superalloy using arc ion plating. The phase of these coatings was composed of amorphous alumina and Ni–Al intermetallic compounds. The grains of NiCrAlSiY/Al–Cr–O coatings exhibited a spherical structure. AFM results showed that the roughness of the coating surface increased with the increase of NiCrAlSiY bonding layer thicknesses. The results of Rockwell indentation test showed that all the coatings had good adhesion with the substrate. The results of NiCrAlSiY/Al–Cr–O coatings holding at 1100 °C for 10 h indicated that the crystallization of alumina increased and no spinel formed. As an oxygen inward diffusion barrier, α-Al2O3 could enhance the oxidation resistance of as-deposited coatings. After high temperature treatment, the surface morphology of NiCrAlSiY/Al–Cr–O coatings changed from spherical structure to granular structure. The weight gain of NiCrAlSiY/Al–Cr–O coated samples after heat treatment was much less than that of the uncoated superalloy. Moreover, the oxidation dynamic curves showed that the oxidation weight gain of NiCrAlSiY/Al–Cr–O coated samples increased in the form of parabola while that of the uncoated superalloy increased in a linear way, suggesting the surface of NiCrAlSiY/Al–Cr–O coatings provided a good high temperature protection for the superalloy substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. The influence of oxides on the performance of advanced gas turbines10.1016/j.jeurceramsoc.2007.12.023 ↗
2. Improved oxidation resistance of thermal barrier coatings10.1016/S0257-8972(99)00345-X ↗
3. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
4. Thermal-barrier coatings for more efficient gas-turbine engines10.1557/mrs.2012.232 ↗
5. Current status of thermal barrier coatings–an overview10.1016/0257-8972(87)90003-X ↗
6. Use of protective coatings in aero gas turbine engines
7. Coating service experience with industrial gas turbines
8. Thermal barrier coat system for gas turbine application-A review10.1515/HTMP.2004.23.2.73 ↗
9. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
10. Preparation and properties of ceramic Al2O3 coating as TBCs on MCrAly layer appliedon Inconel alloy by cathodic plasma electrolytic deposition10.1016/j.surfcoat.2011.10.060 ↗
11. Performance of thermal barrier coatings in high heat flux environments10.1016/0040-6090(84)90534-0 ↗
12. Oxidation behavior of thermal barrier coatings obtained by detonation spraying10.1016/S0257-8972(02)00783-1 ↗
13. Development of advanced low conductivity thermal barrier coatings10.1111/j.1744-7402.2004.tb00158.x ↗
14. Microstructural, mechanical and thermal characteristics of zirconia-based thermal barrier coatings deposited by plasma spraying10.1016/j.ceramint.2015.05.145 ↗
15. Failure modes in plasma-sprayed thermal barrier coatings10.1016/S0921-5093(02)00251-4 ↗
16. Thermal conductivity issues of EB-PVD thermal barrier coatings10.1002/mawe.200700189 ↗
17. The effect of coating thickness on the thermal conductivity of EB-PVD PYSZ thermal barrier coatings10.1016/j.surfcoat.2005.07.109 ↗
18. Thermal properties of plasma-sprayed functionally graded thermal barrier coatings10.1016/S0040-6090(00)01024-5 ↗
19. Optimization selection of the thermal conductivity of the top ceramic layer in the Double-Ceramic-Layer Thermal Barrier Coatings based on the finite element analysis of thermal insulation10.1016/j.surfcoat.2013.12.047 ↗
20. Lifetime prediction of plasma-sprayed thermal barrier coating systems10.1016/j.surfcoat.2012.11.069 ↗
21. Spallation of thermal barrier coatings with real thermally grown oxide morphology under thermal stress
22. Hot corrosion behavior of AIP NiCoCrAlY(SiB) coatings on nickel base superalloys10.1016/j.surfcoat.2003.12.020 ↗
23. Influence of salt spray corrosion on subsequent isothermal oxidation behaviours of AIP NiCoCrAlYSiB coatings10.1016/j.corsci.2008.05.010 ↗
24. Isothermal oxidation behaviour of a gradient NiCoCrAlSiY coating deposited by arc ion plating on a Ni-based single crystal superalloy10.1016/j.corsci.2009.03.036 ↗
25. High temperature corrosion behaviour of a gradient NiCoCrAlYSi coating I: microstructure evolution10.1016/j.corsci.2010.01.025 ↗
26. High vacuumarc ion platingNiCrAlY coatings: bias effect and approach to preparation of functional gradient coatings10.1016/j.surfcoat.2015.09.043 ↗
27. The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel10.1016/j.wear.2006.11.053 ↗
28. Deposition stages and applications of CAE multicomponent coatings10.1016/0257-8972(95)02427-1 ↗
29. Analyte ionization in a furnace atomization plasma emission source10.1039/a706908a ↗
30. Adhesive strength of new thermal barrier coatings of rare earth zirconates10.1016/j.vacuum.2009.04.053 ↗
31. Bond strength, bond stress and spallation mechanisms of thermal barrier coatings10.1016/S0257-8972(99)00338-2 ↗
32. Spalling failure of a thermal barrier coating associated with aluminum depletion in the bond-coat10.1016/S1359-6454(98)00407-8 ↗
33. The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel10.1016/j.wear.2006.11.053 ↗
34. Effect of TGO creep on top-coat cracking induced by cyclic displacement instability in a thermal barrier coating system10.1016/j.surfcoat.2014.06.052 ↗
35. Heat and hydrothermal treatments on the microstructure evolution and mechanical properties of plasma sprayed hydroxyapatite coatings reinforced with graphene nanoplatelets10.1016/j.jmbbm.2019.103418 ↗
36. On the oxidation behavior of cathodic arc evaporated Al-Cr and Al-Cr-O coatings10.1016/j.vacuum.2019.01.052 ↗
37. Formation of cubic structured (Al1-xCrx)2+δ O3 and its dynamic transition to corundum phase during cathodic arc evaporation10.1016/j.surfcoat.2012.10.062 ↗
38. Effect of TGO thickness on the thermal barrier coatings life under thermal shock and thermal cycle loading10.1016/j.ceramint.2018.02.140 ↗
39. Performance of single YSZ, Gd2Zr2O7 and double-layered YSZ/Gd2Zr2O7 thermal barrier coatings in isothermal oxidation test conditions10.1016/j.vacuum.2020.109401 ↗
40. High temperature oxidation of HFPD thermal-sprayed MCrAlY coatings10.1016/S0921-5093(00)01239-9 ↗
41. MCrAlY coating design based on oxidation-diffusion modelling. Part I: microstructural evolution10.1016/j.surfcoat.2014.05.067 ↗
42. Compositional effects on the high-temperature oxidation lifetime of MCrAlY type coating alloys10.1016/j.corsci.2015.03.011 ↗
43. High temperature oxidation of MCrAlY coatings modified by Al2O3 PVD overlay10.1016/j.surfcoat.2014.09.048 ↗
44. Effect of microstructure on early oxidation of MCrAlY coatings10.1016/j.actamat.2018.08.018 ↗
45. Effect of interface diffusion on low-cycle fatigue behaviors of MCrAlY coated single crystal superalloys10.1016/j.ijfatigue.2020.105660 ↗
46. High temperature oxidation resistance and thermal growth oxides formation and growth mechanism of double-layer thermal barrier coatings10.1016/j.jallcom.2019.05.052 ↗
47. Microstructure, oxidation behavior and adhesion of a CoNiCrAlTaY coating deposited on a high Nb-TiAl alloy by plasma surface metallizing technique10.1016/j.vacuum.2020.109494 ↗